Show topic list

Markets Other

RECYCLING SWITZERLAND Plastics waste recovered from households, collection rate up in 2024 / Recycling rate exceeds 55% threshold	27.08.2025
MATTERR Plans to build PET chemical recycling plant in Germany / EUR 63 mn invested	27.08.2025
GERMAN ECONOMY Ifo business climate improves but only for technical reasons / Mood in plastics segment remains low	26.08.2025
RECYCLING AUSTRIA Sizable increase in PET recycling volumes thanks to introduction of single-use deposit scheme	26.08.2025
KIVO / KRAS Recycling JV Reks to be discontinued / Future of plant in Kosovo uncertain	25.08.2025
PACKAGING RECYCLING IRELAND Chances of meeting EU target this year fade – EPA / Waste generation edges higher in 2023	25.08.2025
RECYCLING CENTRAL ASIA Kazakhstan MPs seek state aid for plastics waste recycling / EPR system to take off in Uzbekistan in 2026 / Waste management in embryonic stage in some countries	25.08.2025
LOGISTICS Freight rates down on almost all routes / US becoming problematic for world trade	22.08.2025
TURKEY Business profitability falls to lowest level in five years / Exports edge up despite dip in European sales / General economic uncertainty plagues operations	22.08.2025
REMONDIS German waste disposal company takes over competitor Siemer	21.08.2025
FLEXIBLE PACKAGING Prices remain volatile in Q2 / Slight decline for HDPE film – FPE	20.08.2025
COMPOSITES EuCIA sees ‘untapped potential' of thermoset composite waste / Reclaim rate estimated at 5%	19.08.2025
RECYCLING UK 'Urgent action' needed in reclaim industry – BPF official / Plant closures highlight problems / Viridor for sale?	18.08.2025
LOGISTICS Convertors complain about decreasing reliability in deliveries / Truck drivers urgently needed	15.08.2025
UK ECONOMY Q2 growth surprises to upside / Production activity contracts / Concerns remain about months ahead	15.08.2025
DOW CHEMICAL Chemical recycling project in Germany falls victim to budget cuts	13.08.2025
PLASTICS WASTE Malaysia bans import of plastics waste from US / Environmentalists warn US plastics waste could flood Mexico, India, Turkey	13.08.2025
CIRCULAR ECONOMY EU Commission opens consultation on Circular Economy Act	12.08.2025
SAPERATEC Recycling company slides into insolvency	12.08.2025
UK CONSTRUCTION Output falls at sharpest level in five years / Decline in housebuilding to blame – report	11.08.2025
VERSALIS Italian petchem giant signs deal with Acea Ambiente to boost chemical plastics recycling in Italy	11.08.2025
EPP RECYCLING General Industries launches Europewide initiative for take-back, recycling	11.08.2025
LOGISTICS EU suspends punitive tariffs on US imports – for now / Global trade weakens: concerns about US economy weigh on freight rates	08.08.2025
PET RECYCLING Launch of PET circularity test as tool to simulate multiple recycling loops	05.08.2025
AMAZON Online retailer reduces use of plastics worldwide	05.08.2025

Seite 5 von 118

Topic search

Plastics Information Europe

Polymer Prices (6.180)
- Petrochemicals (524)
- Standard Thermoplastics (989)
- PET (253)
- Engineering Thermoplastics (260)
- Recyclate (384)
  - General (5)
  - Standard Thermoplastics / Recyclate (189)
  - Engineering Thermoplastics / Recyclate (190)
- Polyurethanes (252)
- High Performance Polymers (2)
- Composites (187)
- Announcements (2.583)
- World Regions (598)
  - China (302)
    - Standard Thermoplastics (152)
    - Engineering Thermoplastics (150)
  - North America (172)
  - Russia (124)
- Spot Prices (130)
- Forecasts (18)
Companies (35.358)
- Polymer Materials (17.419)
  - Petrochemicals (3.151)
  - Charge (1.881)
    - General (90)
    - Masterbatches (342)
    - Additives (791)
    - Colours (387)
    - Reinforcements/Fillers (271)
  - Polymers (11.203)
    - General (723)
    - Standard Thermoplastics (3.885)
      - General (113)
      - Polyolefins (1.975)
      - Polystyrenes (348)
      - PVC (678)
      - Polyester (568)
      - Expandable (PS, PP, PE) (203)
    - Technical Thermoplastics (3.295)
      - General (350)
      - Styrene Copolymers (263)
      - PC/PMMA (468)
      - Polyamides (923)
      - POM/PBT/PP (321)
      - Technical Compounds (970)
    - PUR (799)
    - Other (2.501)
      - General (101)
      - Composites/Thermosets (412)
      - High Performance (626)
      - Biopolymers (706)
      - Elastomers/TPE (374)
      - Recyclate (282)
  - Distribution (1.184)
- Machinery (1.113)
  - General (29)
  - Plant Construction (143)
  - Core Machines (755)
    - General (91)
    - Extrusion (181)
    - Injection Moulding (379)
    - Blow Moulding (72)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (181)
    - General (32)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (98)
    - Components (13)
  - Finishing (5)
- Processing (7.272)
  - General (909)
  - Extrusion (2.378)
    - General (125)
    - Flexible Films (1.149)
    - Rigid Films/Sheet (385)
    - Pipes (352)
    - Profiles/Rods (260)
    - Other (107)
  - Injection Moulding (1.763)
  - Blow Moulding (520)
  - PUR (319)
  - Other (1.142)
    - General (123)
    - Foam (312)
    - Composites/Thermosets (355)
    - Thermoforming (223)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (241)
- Application (7.478)
  - General (131)
  - Packaging (3.229)
  - Construction (739)
  - Automotive / Transport (1.712)
  - Electrical Appliances (347)
  - Consumer Goods (695)
  - Medical (405)
  - Technical (220)
- Other (2.076)
  - Recycling/Disposal (1.667)
  - Services (256)
  - Logistics (153)
Commercial Register (145)
- Insolvency (140)
- Changes (5)
Markets (23.958)
- Polymer Materials (10.341)
  - Petrochemicals (2.540)
  - Charge (872)
    - General (38)
    - Masterbatches (97)
    - Additives (345)
    - Colours (161)
    - Reinforcements/Fillers (231)
  - Polymers (6.533)
    - General (827)
    - Standard Thermoplastics (2.479)
      - General (74)
      - Polyolefins (1.240)
      - Polystyrenes (161)
      - PVC (507)
      - Polyester (356)
      - Expandable (PS, PP, PE) (141)
    - Technical Thermoplastics (1.308)
      - General (88)
      - Styrene Copolymers (108)
      - PC/PMMA (157)
      - Polyamides (453)
      - POM/PBT/PP (112)
      - Technical Compounds (390)
    - PUR (469)
    - Other (1.450)
      - General (47)
      - Composites/Thermosets (298)
      - High Performance (307)
      - Biopolymers (435)
      - Elastomers/TPE (143)
      - Recyclate (220)
  - Other Materials (60)
  - Distribution (336)
- Machinery (521)
  - General (130)
  - Plant Construction (14)
  - Core Machines (305)
    - General (115)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.727)
  - General (446)
  - Extrusion (623)
    - General (20)
    - Flexible Films (302)
    - Rigid Films/Sheets (126)
    - Pipes (74)
    - Profiles/Rods (90)
    - Other (11)
  - Injection Moulding (181)
  - Blow Moulding (43)
  - PUR (82)
  - Other (307)
    - General (20)
    - Foam (80)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.221)
  - General (47)
  - Packaging (2.046)
  - Construction (323)
  - Automotive / Transport (991)
  - Electrical Appliances (225)
  - Consumer Goods (265)
  - Medical (210)
  - Technical (61)
  - Other (53)
- Regions and Countries (4.146)
  - World (195)
  - German-speaking Countries (491)
  - Europe (2.018)
    - General (491)
    - Italy (145)
    - France (155)
    - Spain/Portugal (103)
    - Great Britain/Ireland (514)
    - Low Countries (75)
    - Central Europe (179)
    - Scandinavia (46)
    - Russia (113)
    - Eastern Europe (54)
    - Southeastern Europe (143)
  - North America (496)
  - Asia (680)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (27)
    - India (87)
  - Middle East (144)
  - Other (40)
  - South America (82)
- Other (3.002)
  - Recycling/Disposal (2.164)
  - Economic Trend (471)
  - Services (41)
  - Logistics (253)
  - Energy (73)
Production and Engineering (3.808)
- Polymer Materials (2.372)
  - Petrochemicals (60)
  - Charge (443)
    - General (14)
    - Masterbatches (112)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.838)
    - General (30)
    - Standard Themoplastics (367)
    - Technical Thermoplastics (603)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (208)
      - POM/PBT/PP (69)
      - Technical Compounds (180)
    - PUR (73)
    - Other (765)
      - General (22)
      - Composites/Thermosets (108)
      - High Performance (160)
      - Biopolymers (249)
      - Elastomers/TPE (114)
      - Recyclate (112)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (438)
  - Polymer Materials (144)
  - Technical (15)
  - Product Development (41)
  - Process (83)
  - Application (93)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (864)
  - Packaging (569)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (27)
  - Consumer Goods (50)
  - Medical (37)
  - Technical (8)
  - Other (38)
- Other (39)
Management (748)
- Purchasing (105)
- General Management (171)
- Company organisation (44)
- Marketing/Sales (15)
- Human Resources (7)
- Finances (97)
- Logistics (309)
People (1.505)
Industry (6.371)
- General (1.241)
- Associations/Institutions (2.427)
- Legislation (1.393)
- Environment / Health (1.300)
- plas.TV - Plastics unite(d) (10)
Events (1.162)
Plastic Fantastic (561)
Commentaries (84)
Interviews (149)
Notes by Publisher (73)