Show topic list

Markets Technical Thermoplastics Polyamides

INVISTA Shanghai expansion enters next phase / PA 6.6 capacity to more than double	30.08.2021
PETROCHEMICAL MARKETS PA 6.6: Radici continues force majeure / Maintenance set until mid-September / Standstill at BASF-JV Alsachimie	11.08.2021
DSM Plastics-related materials unit shows better-than-expected Q2 results / Strong demand from automotive, E&E	09.08.2021
DUPONT Partial lifting of force majeure / Restart of production for long-chain PA compounds	15.07.2021
EVONIK Construction of PA 12 extension in Marl completed / Start-up expected in Q4 / Bio-based monomers not a major issue	14.07.2021
RADICI FY 2020 sales down nearly 7% / Core profit and net income climb / Positive start in Q1	12.07.2021
ASCEND Capacity upgrade for long-chain PA at Greenwood	30.06.2021
BASF Recyclability of multilayer films with PA 6 certified / Classified as fully recyclable under specific conditions	22.06.2021
PETROCHEMICAL MARKETS Domo declares force majeure for caprolactam, PA 6 production	02.06.2021
ARKEMA Acquisition of Italian compounder Agiplast / PA 11 plant in Singapore on track / Specialty materials drive Q1 earnings	31.05.2021
DSM Q1 sales up 13% and volumes soar 21% / Fine-tuning of group outlook for 2021 after recovery of Materials division	21.05.2021
ASCEND Two fires at failure-plagued Pensacola site / PA force majeure persists	12.05.2021
PETROCHEMICAL MARKETS PA 6, PA 6.6, PBT: Lanxess declares force majeure on compounds from North America	05.05.2021
RADICI Polyamide specialist investing EUR 35m to boost capacity / New plant in China, expansions in Europe and Mexico	21.04.2021
PETROCHEMICAL MARKETS BASF declares force majeure for PA 6.6 line / Short ADN outage in Chalampé	20.04.2021
PETROCHEMICAL MARKETS BASF declares force majeure for PA 6 deliveries from Antwerp	01.04.2021
UPDATE - PETROCHEMICAL MARKETS Invista reports “unforeseen maintenance shutdown” for ADN in the US / Company denies shutdown	25.03.2021
PETROCHEMICAL MARKETS Lanxess lifts forces majeures for PA 6 in Uerdingen and Antwerp	23.03.2021
PETROCHEMICAL MARKETS PA 6/caprolactam: Radici says bottlenecks coming / Maintenance ahead at Fibrant	19.03.2021
DOMO Partnership with STS Tecnopolimeri for flame-retardant PA 6 / Focus on use in household and electronic goods / Distribution agreement in Italy	16.03.2021
PETROCHEMICAL MARKETS PA 6.6: Ascend declares force majeure for precursor ACN in the US	26.02.2021
DSM Materials segment suffers / Sale of divisions to Covestro expected by July	24.02.2021
K.D. FEDDERSEN German firm to supply PA 6.6 from Ascend	24.02.2021
PETROCHEMICAL MARKETS DuPont declares force majeure on polyamides, PPA, PBT worldwide / Deliveries stopped / BASF USA also cuts back	19.02.2021
BADA Compounder expands portfolio of high-temperature polyamides	17.02.2021

Seite 5 von 18

Topic search

Plastics Information Europe

Polymer Prices (5.976)
- Petrochemicals (463)
- Standard Thermoplastics (947)
- PET (246)
- Engineering Thermoplastics (253)
- Recyclate (364)
  - General (3)
  - Standard Thermoplastics / Recyclate (180)
  - Engineering Thermoplastics / Recyclate (181)
- Polyurethanes (244)
- High Performance Polymers (2)
- Composites (180)
- Announcements (2.570)
- World Regions (576)
  - China (287)
    - Standard Thermoplastics (145)
    - Engineering Thermoplastics (142)
  - North America (165)
  - Russia (124)
- Spot Prices (122)
- Forecasts (9)
Companies (34.011)
- Polymer Materials (16.830)
  - Petrochemicals (3.025)
  - Charge (1.825)
    - General (89)
    - Masterbatches (335)
    - Additives (764)
    - Colours (373)
    - Reinforcements/Fillers (264)
  - Polymers (10.821)
    - General (699)
    - Standard Thermoplastics (3.741)
      - General (113)
      - Polyolefins (1.899)
      - Polystyrenes (331)
      - PVC (655)
      - Polyester (551)
      - Expandable (PS, PP, PE) (192)
    - Technical Thermoplastics (3.195)
      - General (349)
      - Styrene Copolymers (258)
      - PC/PMMA (452)
      - Polyamides (884)
      - POM/PBT/PP (311)
      - Technical Compounds (941)
    - PUR (776)
    - Other (2.410)
      - General (101)
      - Composites/Thermosets (404)
      - High Performance (602)
      - Biopolymers (692)
      - Elastomers/TPE (363)
      - Recyclate (248)
  - Distribution (1.159)
- Machinery (1.074)
  - General (27)
  - Plant Construction (133)
  - Core Machines (737)
    - General (89)
    - Extrusion (178)
    - Injection Moulding (367)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (173)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (92)
    - Components (13)
  - Finishing (4)
- Processing (7.009)
  - General (881)
  - Extrusion (2.302)
    - General (116)
    - Flexible Films (1.111)
    - Rigid Films/Sheet (374)
    - Pipes (344)
    - Profiles/Rods (256)
    - Other (101)
  - Injection Moulding (1.685)
  - Blow Moulding (500)
  - PUR (296)
  - Other (1.108)
    - General (119)
    - Foam (303)
    - Composites/Thermosets (347)
    - Thermoforming (211)
    - Rotational Moulding (32)
    - Additive Manufacturing (96)
  - Finishing (237)
- Application (7.190)
  - General (126)
  - Packaging (3.102)
  - Construction (707)
  - Automotive / Transport (1.650)
  - Electrical Appliances (332)
  - Consumer Goods (669)
  - Medical (393)
  - Technical (211)
- Other (1.908)
  - Recycling/Disposal (1.539)
  - Services (250)
  - Logistics (119)
Commercial Register (118)
- Insolvency (113)
- Changes (5)
Markets (22.878)
- Polymer Materials (9.905)
  - Petrochemicals (2.418)
  - Charge (846)
    - General (38)
    - Masterbatches (92)
    - Additives (336)
    - Colours (155)
    - Reinforcements/Fillers (225)
  - Polymers (6.261)
    - General (761)
    - Standard Thermoplastics (2.393)
      - General (74)
      - Polyolefins (1.184)
      - Polystyrenes (157)
      - PVC (498)
      - Polyester (341)
      - Expandable (PS, PP, PE) (139)
    - Technical Thermoplastics (1.265)
      - General (87)
      - Styrene Copolymers (105)
      - PC/PMMA (150)
      - Polyamides (434)
      - POM/PBT/PP (109)
      - Technical Compounds (380)
    - PUR (451)
    - Other (1.391)
      - General (47)
      - Composites/Thermosets (289)
      - High Performance (298)
      - Biopolymers (429)
      - Elastomers/TPE (140)
      - Recyclate (188)
  - Other Materials (58)
  - Distribution (322)
- Machinery (503)
  - General (127)
  - Plant Construction (14)
  - Core Machines (291)
    - General (109)
    - Extrusion (37)
    - Injection Moulding (124)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.671)
  - General (421)
  - Extrusion (604)
    - General (20)
    - Flexible Films (294)
    - Rigid Films/Sheets (119)
    - Pipes (71)
    - Profiles/Rods (89)
    - Other (11)
  - Injection Moulding (177)
  - Blow Moulding (43)
  - PUR (78)
  - Other (303)
    - General (20)
    - Foam (77)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (38)
  - Finishing (45)
- Applications (4.018)
  - General (40)
  - Packaging (1.945)
  - Construction (303)
  - Automotive / Transport (954)
  - Electrical Appliances (216)
  - Consumer Goods (249)
  - Medical (203)
  - Technical (60)
  - Other (48)
- Regions and Countries (4.063)
  - World (194)
  - German-speaking Countries (482)
  - Europe (1.968)
    - General (474)
    - Italy (142)
    - France (155)
    - Spain/Portugal (99)
    - Great Britain/Ireland (504)
    - Low Countries (74)
    - Central Europe (174)
    - Scandinavia (46)
    - Russia (109)
    - Eastern Europe (50)
    - Southeastern Europe (141)
  - North America (486)
  - Asia (673)
    - General (122)
    - China (390)
    - Japan (50)
    - Korea (26)
    - India (85)
  - Middle East (141)
  - Other (38)
  - South America (81)
- Other (2.718)
  - Recycling/Disposal (2.001)
  - Economic Trend (393)
  - Services (41)
  - Logistics (221)
  - Energy (62)
Production and Engineering (3.745)
- Polymer Materials (2.335)
  - Petrochemicals (59)
  - Charge (437)
    - General (14)
    - Masterbatches (111)
    - Additives (224)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.809)
    - General (30)
    - Standard Themoplastics (361)
    - Technical Thermoplastics (597)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (62)
      - Polyamides (204)
      - POM/PBT/PP (69)
      - Technical Compounds (180)
    - PUR (72)
    - Other (749)
      - General (21)
      - Composites/Thermosets (107)
      - High Performance (160)
      - Biopolymers (242)
      - Elastomers/TPE (113)
      - Recyclate (106)
  - Other (30)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (429)
  - Polymer Materials (144)
  - Technical (13)
  - Product Development (41)
  - Process (81)
  - Application (90)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (56)
- New Products (849)
  - Packaging (559)
  - Construction (34)
  - Automotive / Transport (99)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (7)
  - Other (38)
- Other (38)
Management (678)
- Purchasing (102)
- General Management (151)
- Company organisation (43)
- Marketing/Sales (14)
- Human Resources (7)
- Finances (91)
- Logistics (270)
People (1.485)
Industry (5.957)
- General (1.178)
- Associations/Institutions (2.284)
- Legislation (1.272)
- Environment / Health (1.213)
- plas.TV - Plastics unite(d) (10)
Events (1.132)
Plastic Fantastic (537)
Commentaries (79)
Interviews (135)
Notes by Publisher (71)