Show topic list

Markets Polymers Standard Thermoplastics

LYONDELLBASELL US bankruptcy court grants emergency financing / European converters are concerned about bonuses	12.01.2009
DOW Slight hope that K-Dow is not dead / Acquisition of Rohm and Haas still hanging in the balance	09.01.2009
SABIC EUROPE Launch of UHMWPE / Production start-up scheduled for Q2 2009	09.01.2009
POLIMERICA “Lupotech T” specified for 300,000 t/y LDPE plant	08.01.2009
LYONDELLBASELL Chapter 11 filing in New York / Finance holding Basell Germany involved, other non-US business unaffected	07.01.2009
DOW Liveris threatens Kuwait with legal action / Sabre rattling in pursuit of break-up fee for scuttled jv?	07.01.2009
UHMWPE IK: Prices affected less than standard HDPE	23.12.2008
DOW Three plants at Terneuzen to close in restructuring plan	16.12.2008
ARKEMA Restructuring of vinyls chain continuing / Two French sites targeted / Nearly 170 jobs on the line	03.12.2008
POLIMERI EUROPA Entire petrochemicals complex in Sardinia to go offline for two months / Cracker, HDPE, chlorine chain and aromatics affected / Phenol chain down for all of 2009	01.12.2008
ROMPETROL Polyethylene production reduced by 55% for two months / Nearly a quarter of the workforce to be temporarily laid off	28.11.2008
LA SEDA Financing obtained for Portuguese PTA plant / Interquisa acquisition finally falls through	21.11.2008
BOREALIS “Lupotech T” specified for 350,000 t/y LDPE plant	19.11.2008
PETROCHEMICAL MARKETS CMAI sees flood of polyolefins on its way from the Middle East / Successful conference in Düsseldorf	18.11.2008
OLTCHIM Scaling back production to 40% of capacity / Sourcing of C2 and C3 from Arpechim halted / Job cuts	18.11.2008
APPC 455,000 t/y PP plant commissioned in Jubail	14.11.2008
SABIC New PP line comes on stream at Ibn Zahr / World's largest single “Unipol” facility	13.11.2008
INEOS VINYLS Sartor gains minority stake in Italian PVC subsidiary / "Continuity of the site is guaranteed" / No agreement on chlorine modernisation	10.11.2008
COMMODITIES TRADING Plastics futures market opens in US	07.11.2008
PETROCHEMICAL MARKETS Latest Italian chemicals crisis roundtable ends inconclusively / Sale of Ineos Vinyls Italia agreed?	27.10.2008
BOROUGE Logistics hub in China to handle UAE expansion	27.10.2008
PKN ORLEN Polish consortium launches bid for PKN Orlen's PVC subsidiary / Feedstock source unclear / Financing problems a threat?	17.10.2008
STYROCHEM Concentrating EPS production in Porvoo / Kokemäki plant to be shut	13.10.2008
PKN ORLEN Sale of PVC activities operated by Anwil and Spolana may be imminent / Government wants PKN to concentrate on energy sector	09.10.2008
GAIL Cracker expansion in northern India / Downstream plants for PE and PP	03.10.2008

Seite 85 von 99

Topic search

Plastics Information Europe

Polymer Prices (6.333)
- Petrochemicals (563)
- Standard Thermoplastics (1.017)
- PET (258)
- Engineering Thermoplastics (266)
- Recyclate (393)
  - General (6)
  - Standard Thermoplastics / Recyclate (193)
  - Engineering Thermoplastics / Recyclate (194)
- Polyurethanes (258)
- High Performance Polymers (2)
- Composites (192)
- Announcements (2.617)
- World Regions (611)
  - China (310)
    - Standard Thermoplastics (156)
    - Engineering Thermoplastics (154)
  - North America (177)
  - Russia (124)
- Spot Prices (134)
- Forecasts (22)
Companies (36.050)
- Polymer Materials (17.749)
  - Petrochemicals (3.220)
  - Charge (1.910)
    - General (99)
    - Masterbatches (342)
    - Additives (805)
    - Colours (391)
    - Reinforcements/Fillers (273)
  - Polymers (11.423)
    - General (738)
    - Standard Thermoplastics (3.961)
      - General (113)
      - Polyolefins (2.015)
      - Polystyrenes (355)
      - PVC (694)
      - Polyester (578)
      - Expandable (PS, PP, PE) (206)
    - Technical Thermoplastics (3.354)
      - General (352)
      - Styrene Copolymers (270)
      - PC/PMMA (474)
      - Polyamides (949)
      - POM/PBT/PP (326)
      - Technical Compounds (983)
    - PUR (810)
    - Other (2.560)
      - General (105)
      - Composites/Thermosets (414)
      - High Performance (639)
      - Biopolymers (713)
      - Elastomers/TPE (382)
      - Recyclate (307)
  - Distribution (1.196)
- Machinery (1.124)
  - General (31)
  - Plant Construction (144)
  - Core Machines (761)
    - General (92)
    - Extrusion (182)
    - Injection Moulding (382)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (183)
    - General (33)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (99)
    - Components (13)
  - Finishing (5)
- Processing (7.397)
  - General (925)
  - Extrusion (2.417)
    - General (128)
    - Flexible Films (1.171)
    - Rigid Films/Sheet (391)
    - Pipes (357)
    - Profiles/Rods (263)
    - Other (107)
  - Injection Moulding (1.792)
  - Blow Moulding (529)
  - PUR (329)
  - Other (1.159)
    - General (128)
    - Foam (316)
    - Composites/Thermosets (357)
    - Thermoforming (228)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (246)
- Application (7.614)
  - General (135)
  - Packaging (3.292)
  - Construction (752)
  - Automotive / Transport (1.743)
  - Electrical Appliances (354)
  - Consumer Goods (702)
  - Medical (412)
  - Technical (224)
- Other (2.166)
  - Recycling/Disposal (1.734)
  - Services (260)
  - Logistics (172)
Commercial Register (161)
- Insolvency (156)
- Changes (5)
Markets (24.541)
- Polymer Materials (10.593)
  - Petrochemicals (2.606)
  - Charge (881)
    - General (39)
    - Masterbatches (98)
    - Additives (349)
    - Colours (162)
    - Reinforcements/Fillers (233)
  - Polymers (6.704)
    - General (860)
    - Standard Thermoplastics (2.530)
      - General (74)
      - Polyolefins (1.266)
      - Polystyrenes (166)
      - PVC (519)
      - Polyester (362)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.347)
      - General (89)
      - Styrene Copolymers (115)
      - PC/PMMA (161)
      - Polyamides (472)
      - POM/PBT/PP (114)
      - Technical Compounds (396)
    - PUR (477)
    - Other (1.490)
      - General (47)
      - Composites/Thermosets (301)
      - High Performance (313)
      - Biopolymers (440)
      - Elastomers/TPE (147)
      - Recyclate (242)
  - Other Materials (61)
  - Distribution (341)
- Machinery (524)
  - General (131)
  - Plant Construction (14)
  - Core Machines (307)
    - General (117)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.749)
  - General (459)
  - Extrusion (628)
    - General (20)
    - Flexible Films (305)
    - Rigid Films/Sheets (126)
    - Pipes (75)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (181)
  - Blow Moulding (43)
  - PUR (84)
  - Other (309)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.327)
  - General (51)
  - Packaging (2.093)
  - Construction (338)
  - Automotive / Transport (1.012)
  - Electrical Appliances (230)
  - Consumer Goods (274)
  - Medical (213)
  - Technical (62)
  - Other (54)
- Regions and Countries (4.191)
  - World (196)
  - German-speaking Countries (498)
  - Europe (2.047)
    - General (505)
    - Italy (145)
    - France (155)
    - Spain/Portugal (105)
    - Great Britain/Ireland (521)
    - Low Countries (75)
    - Central Europe (180)
    - Scandinavia (46)
    - Russia (115)
    - Eastern Europe (57)
    - Southeastern Europe (143)
  - North America (498)
  - Asia (682)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (148)
  - Other (40)
  - South America (82)
- Other (3.157)
  - Recycling/Disposal (2.244)
  - Economic Trend (517)
  - Services (41)
  - Logistics (272)
  - Energy (83)
Production and Engineering (3.842)
- Polymer Materials (2.394)
  - Petrochemicals (63)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.855)
    - General (31)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (74)
    - Other (775)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (161)
      - Biopolymers (252)
      - Elastomers/TPE (115)
      - Recyclate (116)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (443)
  - Polymer Materials (145)
  - Technical (16)
  - Product Development (42)
  - Process (83)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (871)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (39)
Management (797)
- Purchasing (108)
- General Management (190)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (100)
- Logistics (331)
People (1.514)
Industry (6.558)
- General (1.273)
- Associations/Institutions (2.497)
- Legislation (1.453)
- Environment / Health (1.325)
- plas.TV - Plastics unite(d) (10)
Events (1.174)
Plastic Fantastic (575)
Commentaries (85)
Interviews (159)
Notes by Publisher (79)