Show topic list

Markets Polymers Standard Thermoplastics

PETROCHEMICAL MARKETS Dubai exchange again delays plastics futures launch	11.02.2009
INVISTA PET plant in Germany to close at the end of March / Severance package for employees / “No other option”	09.02.2009
OCTAL Integrated PET resin and sheet facility started up	09.02.2009
WELLMAN US PET producer emerges from bankruptcy	05.02.2009
SNEP Arkema process selected for Morocco PVC plant	03.02.2009
SUNOCO Texas 180,000 t/y PP facility to close	21.01.2009
AMERICAS STYRENICS PS producer removes over 100,000 t/y of capacity from US market	21.01.2009
ERCROS PVC output in Tarragona to rise to 200,000 t/y / Site will become one of Europe's largest producers	20.01.2009
BRASKEM Withdrawal from PET business / Production on a competitive basis is no longer viable	15.01.2009
LYONDELLBASELL US bankruptcy court grants emergency financing / European converters are concerned about bonuses	12.01.2009
DOW Slight hope that K-Dow is not dead / Acquisition of Rohm and Haas still hanging in the balance	09.01.2009
SABIC EUROPE Launch of UHMWPE / Production start-up scheduled for Q2 2009	09.01.2009
POLIMERICA “Lupotech T” specified for 300,000 t/y LDPE plant	08.01.2009
LYONDELLBASELL Chapter 11 filing in New York / Finance holding Basell Germany involved, other non-US business unaffected	07.01.2009
DOW Liveris threatens Kuwait with legal action / Sabre rattling in pursuit of break-up fee for scuttled jv?	07.01.2009
UHMWPE IK: Prices affected less than standard HDPE	23.12.2008
DOW Three plants at Terneuzen to close in restructuring plan	16.12.2008
ARKEMA Restructuring of vinyls chain continuing / Two French sites targeted / Nearly 170 jobs on the line	03.12.2008
POLIMERI EUROPA Entire petrochemicals complex in Sardinia to go offline for two months / Cracker, HDPE, chlorine chain and aromatics affected / Phenol chain down for all of 2009	01.12.2008
ROMPETROL Polyethylene production reduced by 55% for two months / Nearly a quarter of the workforce to be temporarily laid off	28.11.2008
LA SEDA Financing obtained for Portuguese PTA plant / Interquisa acquisition finally falls through	21.11.2008
BOREALIS “Lupotech T” specified for 350,000 t/y LDPE plant	19.11.2008
PETROCHEMICAL MARKETS CMAI sees flood of polyolefins on its way from the Middle East / Successful conference in Düsseldorf	18.11.2008
OLTCHIM Scaling back production to 40% of capacity / Sourcing of C2 and C3 from Arpechim halted / Job cuts	18.11.2008
APPC 455,000 t/y PP plant commissioned in Jubail	14.11.2008

Seite 83 von 97

Topic search

Plastics Information Europe

Polymer Prices (6.211)
- Petrochemicals (532)
- Standard Thermoplastics (996)
- PET (254)
- Engineering Thermoplastics (262)
- Recyclate (387)
  - General (6)
  - Standard Thermoplastics / Recyclate (190)
  - Engineering Thermoplastics / Recyclate (191)
- Polyurethanes (255)
- High Performance Polymers (2)
- Composites (188)
- Announcements (2.584)
- World Regions (601)
  - China (304)
    - Standard Thermoplastics (153)
    - Engineering Thermoplastics (151)
  - North America (173)
  - Russia (124)
- Spot Prices (131)
- Forecasts (19)
Companies (35.532)
- Polymer Materials (17.506)
  - Petrochemicals (3.167)
  - Charge (1.887)
    - General (94)
    - Masterbatches (342)
    - Additives (793)
    - Colours (387)
    - Reinforcements/Fillers (271)
  - Polymers (11.263)
    - General (727)
    - Standard Thermoplastics (3.903)
      - General (113)
      - Polyolefins (1.987)
      - Polystyrenes (349)
      - PVC (682)
      - Polyester (569)
      - Expandable (PS, PP, PE) (203)
    - Technical Thermoplastics (3.311)
      - General (350)
      - Styrene Copolymers (264)
      - PC/PMMA (471)
      - Polyamides (928)
      - POM/PBT/PP (322)
      - Technical Compounds (976)
    - PUR (803)
    - Other (2.519)
      - General (102)
      - Composites/Thermosets (413)
      - High Performance (631)
      - Biopolymers (708)
      - Elastomers/TPE (376)
      - Recyclate (289)
  - Distribution (1.189)
- Machinery (1.114)
  - General (30)
  - Plant Construction (143)
  - Core Machines (755)
    - General (91)
    - Extrusion (181)
    - Injection Moulding (379)
    - Blow Moulding (72)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (181)
    - General (32)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (98)
    - Components (13)
  - Finishing (5)
- Processing (7.298)
  - General (912)
  - Extrusion (2.385)
    - General (125)
    - Flexible Films (1.153)
    - Rigid Films/Sheet (387)
    - Pipes (353)
    - Profiles/Rods (260)
    - Other (107)
  - Injection Moulding (1.773)
  - Blow Moulding (523)
  - PUR (321)
  - Other (1.143)
    - General (124)
    - Foam (312)
    - Composites/Thermosets (355)
    - Thermoforming (223)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (241)
- Application (7.515)
  - General (132)
  - Packaging (3.242)
  - Construction (740)
  - Automotive / Transport (1.725)
  - Electrical Appliances (352)
  - Consumer Goods (697)
  - Medical (407)
  - Technical (220)
- Other (2.099)
  - Recycling/Disposal (1.684)
  - Services (257)
  - Logistics (158)
Commercial Register (147)
- Insolvency (142)
- Changes (5)
Markets (24.115)
- Polymer Materials (10.408)
  - Petrochemicals (2.557)
  - Charge (872)
    - General (38)
    - Masterbatches (97)
    - Additives (345)
    - Colours (161)
    - Reinforcements/Fillers (231)
  - Polymers (6.582)
    - General (837)
    - Standard Thermoplastics (2.489)
      - General (74)
      - Polyolefins (1.246)
      - Polystyrenes (162)
      - PVC (510)
      - Polyester (356)
      - Expandable (PS, PP, PE) (141)
    - Technical Thermoplastics (1.320)
      - General (88)
      - Styrene Copolymers (108)
      - PC/PMMA (160)
      - Polyamides (457)
      - POM/PBT/PP (113)
      - Technical Compounds (394)
    - PUR (473)
    - Other (1.463)
      - General (47)
      - Composites/Thermosets (299)
      - High Performance (311)
      - Biopolymers (436)
      - Elastomers/TPE (144)
      - Recyclate (226)
  - Other Materials (60)
  - Distribution (337)
- Machinery (522)
  - General (130)
  - Plant Construction (14)
  - Core Machines (306)
    - General (116)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.727)
  - General (446)
  - Extrusion (623)
    - General (20)
    - Flexible Films (302)
    - Rigid Films/Sheets (126)
    - Pipes (74)
    - Profiles/Rods (90)
    - Other (11)
  - Injection Moulding (181)
  - Blow Moulding (43)
  - PUR (82)
  - Other (307)
    - General (20)
    - Foam (80)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.244)
  - General (47)
  - Packaging (2.056)
  - Construction (326)
  - Automotive / Transport (999)
  - Electrical Appliances (226)
  - Consumer Goods (266)
  - Medical (210)
  - Technical (61)
  - Other (53)
- Regions and Countries (4.158)
  - World (195)
  - German-speaking Countries (493)
  - Europe (2.027)
    - General (496)
    - Italy (145)
    - France (155)
    - Spain/Portugal (104)
    - Great Britain/Ireland (516)
    - Low Countries (75)
    - Central Europe (179)
    - Scandinavia (46)
    - Russia (114)
    - Eastern Europe (54)
    - Southeastern Europe (143)
  - North America (496)
  - Asia (681)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (28)
    - India (87)
  - Middle East (144)
  - Other (40)
  - South America (82)
- Other (3.056)
  - Recycling/Disposal (2.189)
  - Economic Trend (487)
  - Services (41)
  - Logistics (258)
  - Energy (81)
Production and Engineering (3.821)
- Polymer Materials (2.382)
  - Petrochemicals (61)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.845)
    - General (30)
    - Standard Themoplastics (368)
    - Technical Thermoplastics (604)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (208)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (74)
    - Other (769)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (160)
      - Biopolymers (250)
      - Elastomers/TPE (115)
      - Recyclate (113)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (439)
  - Polymer Materials (144)
  - Technical (15)
  - Product Development (41)
  - Process (83)
  - Application (94)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (866)
  - Packaging (570)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (27)
  - Consumer Goods (50)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (39)
Management (764)
- Purchasing (105)
- General Management (177)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (99)
- Logistics (315)
People (1.507)
Industry (6.427)
- General (1.250)
- Associations/Institutions (2.449)
- Legislation (1.409)
- Environment / Health (1.309)
- plas.TV - Plastics unite(d) (10)
Events (1.163)
Plastic Fantastic (565)
Commentaries (84)
Interviews (152)
Notes by Publisher (73)