Show topic list

Markets Polymers Standard Thermoplastics

LYONDELLBASELL US bankruptcy court grants emergency financing / European converters are concerned about bonuses	12.01.2009
DOW Slight hope that K-Dow is not dead / Acquisition of Rohm and Haas still hanging in the balance	09.01.2009
SABIC EUROPE Launch of UHMWPE / Production start-up scheduled for Q2 2009	09.01.2009
POLIMERICA “Lupotech T” specified for 300,000 t/y LDPE plant	08.01.2009
LYONDELLBASELL Chapter 11 filing in New York / Finance holding Basell Germany involved, other non-US business unaffected	07.01.2009
DOW Liveris threatens Kuwait with legal action / Sabre rattling in pursuit of break-up fee for scuttled jv?	07.01.2009
UHMWPE IK: Prices affected less than standard HDPE	23.12.2008
DOW Three plants at Terneuzen to close in restructuring plan	16.12.2008
ARKEMA Restructuring of vinyls chain continuing / Two French sites targeted / Nearly 170 jobs on the line	03.12.2008
POLIMERI EUROPA Entire petrochemicals complex in Sardinia to go offline for two months / Cracker, HDPE, chlorine chain and aromatics affected / Phenol chain down for all of 2009	01.12.2008
ROMPETROL Polyethylene production reduced by 55% for two months / Nearly a quarter of the workforce to be temporarily laid off	28.11.2008
LA SEDA Financing obtained for Portuguese PTA plant / Interquisa acquisition finally falls through	21.11.2008
BOREALIS “Lupotech T” specified for 350,000 t/y LDPE plant	19.11.2008
PETROCHEMICAL MARKETS CMAI sees flood of polyolefins on its way from the Middle East / Successful conference in Düsseldorf	18.11.2008
OLTCHIM Scaling back production to 40% of capacity / Sourcing of C2 and C3 from Arpechim halted / Job cuts	18.11.2008
APPC 455,000 t/y PP plant commissioned in Jubail	14.11.2008
SABIC New PP line comes on stream at Ibn Zahr / World's largest single “Unipol” facility	13.11.2008
INEOS VINYLS Sartor gains minority stake in Italian PVC subsidiary / "Continuity of the site is guaranteed" / No agreement on chlorine modernisation	10.11.2008
COMMODITIES TRADING Plastics futures market opens in US	07.11.2008
PETROCHEMICAL MARKETS Latest Italian chemicals crisis roundtable ends inconclusively / Sale of Ineos Vinyls Italia agreed?	27.10.2008
BOROUGE Logistics hub in China to handle UAE expansion	27.10.2008
PKN ORLEN Polish consortium launches bid for PKN Orlen's PVC subsidiary / Feedstock source unclear / Financing problems a threat?	17.10.2008
STYROCHEM Concentrating EPS production in Porvoo / Kokemäki plant to be shut	13.10.2008
PKN ORLEN Sale of PVC activities operated by Anwil and Spolana may be imminent / Government wants PKN to concentrate on energy sector	09.10.2008
GAIL Cracker expansion in northern India / Downstream plants for PE and PP	03.10.2008

Seite 81 von 95

Topic search

Plastics Information Europe

Polymer Prices (6.046)
- Petrochemicals (487)
- Standard Thermoplastics (960)
- PET (249)
- Engineering Thermoplastics (255)
- Recyclate (370)
  - General (3)
  - Standard Thermoplastics / Recyclate (183)
  - Engineering Thermoplastics / Recyclate (184)
- Polyurethanes (247)
- High Performance Polymers (2)
- Composites (182)
- Announcements (2.574)
- World Regions (583)
  - China (292)
    - Standard Thermoplastics (147)
    - Engineering Thermoplastics (145)
  - North America (167)
  - Russia (124)
- Spot Prices (125)
- Forecasts (12)
Companies (34.497)
- Polymer Materials (17.041)
  - Petrochemicals (3.072)
  - Charge (1.849)
    - General (89)
    - Masterbatches (339)
    - Additives (774)
    - Colours (379)
    - Reinforcements/Fillers (268)
  - Polymers (10.954)
    - General (711)
    - Standard Thermoplastics (3.793)
      - General (113)
      - Polyolefins (1.930)
      - Polystyrenes (335)
      - PVC (662)
      - Polyester (557)
      - Expandable (PS, PP, PE) (196)
    - Technical Thermoplastics (3.231)
      - General (349)
      - Styrene Copolymers (259)
      - PC/PMMA (458)
      - Polyamides (895)
      - POM/PBT/PP (315)
      - Technical Compounds (955)
    - PUR (781)
    - Other (2.438)
      - General (101)
      - Composites/Thermosets (406)
      - High Performance (608)
      - Biopolymers (697)
      - Elastomers/TPE (368)
      - Recyclate (258)
  - Distribution (1.166)
- Machinery (1.085)
  - General (28)
  - Plant Construction (138)
  - Core Machines (740)
    - General (89)
    - Extrusion (180)
    - Injection Moulding (368)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (174)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (93)
    - Components (13)
  - Finishing (5)
- Processing (7.108)
  - General (892)
  - Extrusion (2.332)
    - General (119)
    - Flexible Films (1.126)
    - Rigid Films/Sheet (378)
    - Pipes (349)
    - Profiles/Rods (257)
    - Other (103)
  - Injection Moulding (1.710)
  - Blow Moulding (510)
  - PUR (305)
  - Other (1.121)
    - General (120)
    - Foam (305)
    - Composites/Thermosets (350)
    - Thermoforming (217)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (238)
- Application (7.295)
  - General (128)
  - Packaging (3.151)
  - Construction (720)
  - Automotive / Transport (1.671)
  - Electrical Appliances (336)
  - Consumer Goods (679)
  - Medical (397)
  - Technical (213)
- Other (1.968)
  - Recycling/Disposal (1.583)
  - Services (253)
  - Logistics (132)
Commercial Register (122)
- Insolvency (117)
- Changes (5)
Markets (23.259)
- Polymer Materials (10.060)
  - Petrochemicals (2.470)
  - Charge (855)
    - General (38)
    - Masterbatches (94)
    - Additives (338)
    - Colours (156)
    - Reinforcements/Fillers (229)
  - Polymers (6.352)
    - General (786)
    - Standard Thermoplastics (2.428)
      - General (74)
      - Polyolefins (1.209)
      - Polystyrenes (157)
      - PVC (502)
      - Polyester (346)
      - Expandable (PS, PP, PE) (140)
    - Technical Thermoplastics (1.276)
      - General (87)
      - Styrene Copolymers (105)
      - PC/PMMA (151)
      - Polyamides (438)
      - POM/PBT/PP (110)
      - Technical Compounds (385)
    - PUR (453)
    - Other (1.409)
      - General (47)
      - Composites/Thermosets (292)
      - High Performance (302)
      - Biopolymers (431)
      - Elastomers/TPE (141)
      - Recyclate (196)
  - Other Materials (59)
  - Distribution (324)
- Machinery (507)
  - General (129)
  - Plant Construction (14)
  - Core Machines (293)
    - General (111)
    - Extrusion (37)
    - Injection Moulding (124)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.690)
  - General (430)
  - Extrusion (607)
    - General (20)
    - Flexible Films (296)
    - Rigid Films/Sheets (119)
    - Pipes (72)
    - Profiles/Rods (89)
    - Other (11)
  - Injection Moulding (178)
  - Blow Moulding (43)
  - PUR (81)
  - Other (306)
    - General (20)
    - Foam (79)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.084)
  - General (42)
  - Packaging (1.975)
  - Construction (311)
  - Automotive / Transport (968)
  - Electrical Appliances (219)
  - Consumer Goods (254)
  - Medical (205)
  - Technical (60)
  - Other (50)
- Regions and Countries (4.092)
  - World (195)
  - German-speaking Countries (483)
  - Europe (1.984)
    - General (479)
    - Italy (142)
    - France (155)
    - Spain/Portugal (100)
    - Great Britain/Ireland (507)
    - Low Countries (74)
    - Central Europe (177)
    - Scandinavia (46)
    - Russia (110)
    - Eastern Europe (53)
    - Southeastern Europe (141)
  - North America (489)
  - Asia (678)
    - General (122)
    - China (392)
    - Japan (51)
    - Korea (26)
    - India (87)
  - Middle East (143)
  - Other (39)
  - South America (81)
- Other (2.826)
  - Recycling/Disposal (2.054)
  - Economic Trend (426)
  - Services (41)
  - Logistics (233)
  - Energy (72)
Production and Engineering (3.770)
- Polymer Materials (2.350)
  - Petrochemicals (60)
  - Charge (439)
    - General (14)
    - Masterbatches (111)
    - Additives (226)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.820)
    - General (30)
    - Standard Themoplastics (362)
    - Technical Thermoplastics (600)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (205)
      - POM/PBT/PP (69)
      - Technical Compounds (180)
    - PUR (72)
    - Other (756)
      - General (21)
      - Composites/Thermosets (107)
      - High Performance (160)
      - Biopolymers (245)
      - Elastomers/TPE (114)
      - Recyclate (109)
  - Other (31)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (431)
  - Polymer Materials (144)
  - Technical (13)
  - Product Development (41)
  - Process (82)
  - Application (90)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (57)
- New Products (856)
  - Packaging (565)
  - Construction (35)
  - Automotive / Transport (99)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (7)
  - Other (38)
- Other (39)
Management (712)
- Purchasing (103)
- General Management (159)
- Company organisation (44)
- Marketing/Sales (15)
- Human Resources (7)
- Finances (96)
- Logistics (288)
People (1.496)
Industry (6.109)
- General (1.204)
- Associations/Institutions (2.339)
- Legislation (1.312)
- Environment / Health (1.244)
- plas.TV - Plastics unite(d) (10)
Events (1.146)
Plastic Fantastic (546)
Commentaries (82)
Interviews (141)
Notes by Publisher (72)