www.pieweb.com

Markets Polymer Materials Petrochemicals

SHALE GAS
India's Reliance and China's CNOOC announce plans for gas imports from the US / Feedstock to be used for domestic crackers
22.08.2014
INEOS
Commencing shale gas exploration in the UK / Majority share acquired for licence covering land where Grangemouth refinery is located
20.08.2014
HUNTSMAN
Equipment failure takes out Texan propylene oxide facility / Downstream MDI plants affected
19.08.2014
SABIC
Wilton cracker to be upgraded to enable the processing of ethane / Latest player to respond to US shale gas boom
15.08.2014
SHALE GAS
US fracking activities gather speed / Excessive ethane earmarked for export / Argentina said to possess large reserves / Poland to begin commercial production in 2016 / Environmental impact contested
15.08.2014
PETROCHEMICAL MARKETS
Explosion at propylene pipelines in Taiwan's Kaohsiung City leaves 30 dead / LCY reportedly suspends PP production
13.08.2014
PERSTORP
Plan to exit Vencorex joint venture / Shares likely to be sold to partner PTT
06.08.2014
ENI / VERSALIS
Reprieve for Porto Marghera and Gela sites / National roundtable on restructuring in September / Conversion to renewables hub confirmed
06.08.2014
SHALE GAS
German environment agency remains sceptical on fracking / Latest expert opinion recommends tight restrictions / Draft legislation expected in autumn
05.08.2014
SHALE GAS
First exploration licences awarded in UK / Prelude to drilling permits / Scottish nationalists in a bind
01.08.2014
ARKEMA
New Texas-based MMA plant commissioned / Restructuring of US acrylics activities wrapped up
31.07.2014
STEPAN
New Chinese polyols plant to cater to European insulation market / Commissioning set for 2016
30.07.2014
PETROCHEMICAL MARKETS
BP shuts down its olefin plant in Gelsenkirchen for a few days
25.07.2014
ENI / VERSALIS
Italy braces for another strike over envisaged refinery closures / Nationwide demonstration planned in Rome for 29 July
23.07.2014
PETROCHEMICAL MARKETS
Joint venture plant for styrene and propylene oxide in Moerdijk offline until year's end / Allocations for PO remain stable
16.07.2014
TAIWAN
Petrochemicals Group CPC shuts down cracker in Kaohsiung / Shale gas shock wave rolls on
15.07.2014
PETROCHEMICAL MARKETS
European olefin output improves in Q1 2014 / Renewed cutbacks could see weaker Q2
07.07.2014
SHALE GAS
Spain's constitutional court throws out fracking ban / Some estimate reserves as high as 1.4 tr cbm
01.07.2014
DOW
Construction on mega Texas cracker to start this month / Commissioning in 2017 / Plans for downstream facilities specified
27.06.2014
SHALE GAS CHINA
US-Chinese partnerships explore opportunities for unconventional gas in the People's Republic / Restructuring of energy mix / Chinese firms also participating in US fracking projects
25.06.2014
MITSUBISHI RAYON / MITSUI
MoU for large-scale MMA joint venture in the US / Non-binding feedstock agreement with Dow
23.06.2014
C3 PETROCHEMICALS
EPA permit paves way for massive Texas propane dehydrogenation plant / Start-up expected in 2015
20.06.2014
SHALE GAS
German government working on draft fracking bill / Proposed law would include ban on toxic chemicals, prohibition on drilling near water reserves / Several federal states opposed
18.06.2014
INEOS
Mulling entry into UK shale gas exploration / Working group assessing benefits and risks
18.06.2014
NOVA CHEMICALS
First barrels of ethane from Bakken Shale formation arrive in Joffre / New feedstock mix should enable full-scale production at group's PE plants
17.06.2014
Seite 75 von 109
Topic search
Plastics Information Europe
  • Polymer Prices (6.535)
    • Petrochemicals (622)
    • Standard Thermoplastics (1.057)
    • PET (265)
    • Engineering Thermoplastics (273)
    • Recyclate (408)
      • General (6)
      • Standard Thermoplastics / Recyclate (201)
      • Engineering Thermoplastics / Recyclate (201)
    • Polyurethanes (265)
    • High Performance Polymers (2)
    • Composites (199)
    • Announcements (2.637)
    • World Regions (635)
      • China (326)
        • Standard Thermoplastics (164)
        • Engineering Thermoplastics (162)
      • North America (185)
      • Russia (124)
    • Spot Prices (142)
    • Forecasts (30)
  • Companies (37.264)
    • Polymer Materials (18.290)
      • Petrochemicals (3.331)
      • Charge (1.962)
        • General (102)
        • Masterbatches (347)
        • Additives (834)
        • Colours (402)
        • Reinforcements/Fillers (277)
      • Polymers (11.774)
        • General (758)
        • Standard Thermoplastics (4.089)
          • General (114)
          • Polyolefins (2.082)
          • Polystyrenes (365)
          • PVC (727)
          • Polyester (589)
          • Expandable (PS, PP, PE) (212)
        • Technical Thermoplastics (3.455)
          • General (354)
          • Styrene Copolymers (285)
          • PC/PMMA (491)
          • Polyamides (984)
          • POM/PBT/PP (341)
          • Technical Compounds (1.000)
        • PUR (833)
        • Other (2.639)
          • General (107)
          • Composites/Thermosets (420)
          • High Performance (661)
          • Biopolymers (726)
          • Elastomers/TPE (390)
          • Recyclate (335)
      • Distribution (1.223)
    • Machinery (1.148)
      • General (33)
      • Plant Construction (148)
      • Core Machines (771)
        • General (92)
        • Extrusion (184)
        • Injection Moulding (389)
        • Blow Moulding (73)
        • Foam (12)
        • PUR (17)
        • Compression Moulding (4)
      • Peripherals (190)
        • General (36)
        • Control Systems (4)
        • Automatisation (35)
        • Dies/Tools/Moulds (102)
        • Components (13)
      • Finishing (6)
    • Processing (7.629)
      • General (951)
      • Extrusion (2.474)
        • General (132)
        • Flexible Films (1.199)
        • Rigid Films/Sheet (398)
        • Pipes (367)
        • Profiles/Rods (265)
        • Other (113)
      • Injection Moulding (1.862)
      • Blow Moulding (555)
      • PUR (343)
      • Other (1.189)
        • General (137)
        • Foam (321)
        • Composites/Thermosets (364)
        • Thermoforming (234)
        • Rotational Moulding (36)
        • Additive Manufacturing (97)
      • Finishing (255)
    • Application (7.864)
      • General (147)
      • Packaging (3.389)
      • Construction (772)
      • Automotive / Transport (1.807)
      • Electrical Appliances (363)
      • Consumer Goods (726)
      • Medical (425)
      • Technical (235)
    • Other (2.333)
      • Recycling/Disposal (1.862)
      • Services (265)
      • Logistics (206)
  • Commercial Register (178)
    • Insolvency (172)
    • Changes (6)
  • Markets (25.487)
    • Polymer Materials (10.969)
      • Petrochemicals (2.709)
      • Charge (900)
        • General (43)
        • Masterbatches (100)
        • Additives (354)
        • Colours (166)
        • Reinforcements/Fillers (237)
      • Polymers (6.944)
        • General (913)
        • Standard Thermoplastics (2.609)
          • General (75)
          • Polyolefins (1.304)
          • Polystyrenes (171)
          • PVC (542)
          • Polyester (374)
          • Expandable (PS, PP, PE) (143)
        • Technical Thermoplastics (1.396)
          • General (92)
          • Styrene Copolymers (122)
          • PC/PMMA (167)
          • Polyamides (489)
          • POM/PBT/PP (118)
          • Technical Compounds (408)
        • PUR (489)
        • Other (1.537)
          • General (49)
          • Composites/Thermosets (309)
          • High Performance (319)
          • Biopolymers (446)
          • Elastomers/TPE (151)
          • Recyclate (263)
      • Other Materials (61)
      • Distribution (355)
    • Machinery (537)
      • General (134)
      • Plant Construction (15)
      • Core Machines (313)
        • General (119)
        • Extrusion (38)
        • Injection Moulding (133)
        • Blow Moulding (15)
        • PUR (6)
        • Compression Moulding (2)
      • Peripherals (75)
        • General (21)
        • Automatisation (18)
        • Dies/Tools/Moulds (36)
    • Processing (1.783)
      • General (487)
      • Extrusion (631)
        • General (20)
        • Flexible Films (307)
        • Rigid Films/Sheets (126)
        • Pipes (76)
        • Profiles/Rods (91)
        • Other (11)
      • Injection Moulding (183)
      • Blow Moulding (43)
      • PUR (84)
      • Other (310)
        • General (20)
        • Foam (82)
        • Composites/Thermosets (141)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (39)
      • Finishing (45)
    • Applications (4.526)
      • General (54)
      • Packaging (2.200)
      • Construction (360)
      • Automotive / Transport (1.049)
      • Electrical Appliances (238)
      • Consumer Goods (282)
      • Medical (218)
      • Technical (64)
      • Other (61)
    • Regions and Countries (4.274)
      • World (197)
      • German-speaking Countries (504)
      • Europe (2.109)
        • General (526)
        • Italy (152)
        • France (158)
        • Spain/Portugal (107)
        • Great Britain/Ireland (534)
        • Low Countries (75)
        • Central Europe (184)
        • Scandinavia (48)
        • Russia (119)
        • Eastern Europe (63)
        • Southeastern Europe (143)
      • North America (503)
      • Asia (684)
        • General (123)
        • China (394)
        • Japan (51)
        • Korea (28)
        • India (88)
      • Middle East (152)
      • Other (41)
      • South America (84)
    • Other (3.398)
      • Recycling/Disposal (2.386)
      • Economic Trend (573)
      • Services (44)
      • Logistics (306)
      • Energy (89)
  • Production and Engineering (3.886)
    • Polymer Materials (2.420)
      • Petrochemicals (66)
      • Charge (451)
        • General (15)
        • Masterbatches (116)
        • Additives (232)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.871)
        • General (32)
        • Standard Themoplastics (370)
        • Technical Thermoplastics (606)
          • General (20)
          • Styrene Copolymers (63)
          • PC/PMMA (64)
          • Polyamides (209)
          • POM/PBT/PP (69)
          • Technical Compounds (181)
        • PUR (76)
        • Other (787)
          • General (23)
          • Composites/Thermosets (108)
          • High Performance (163)
          • Biopolymers (255)
          • Elastomers/TPE (115)
          • Recyclate (123)
      • Other (32)
    • Machinery (95)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (32)
        • General (16)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (450)
      • Polymer Materials (146)
      • Technical (16)
      • Product Development (43)
      • Process (84)
      • Application (97)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (60)
    • New Products (881)
      • Packaging (578)
      • Construction (35)
      • Automotive / Transport (104)
      • Electrical Appliances (28)
      • Consumer Goods (51)
      • Medical (39)
      • Technical (8)
      • Other (38)
    • Other (40)
  • Management (865)
    • Purchasing (111)
    • General Management (216)
    • Company organisation (45)
    • Marketing/Sales (16)
    • Human Resources (8)
    • Finances (105)
    • Logistics (364)
  • People (1.521)
  • Industry (6.884)
    • General (1.328)
    • Associations/Institutions (2.608)
    • Legislation (1.562)
    • Environment / Health (1.376)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.204)
  • Plastic Fantastic (594)
  • Commentaries (90)
  • Interviews (170)
  • Notes by Publisher (85)
© 2026 by Plastics Information Europe, Bad Homburg
Date of print: 18/11/2026
Ref: 4xiumvcvknksvxo5p3v1zwud
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?node=100194&page=75&pageid=302