Show topic list

Markets Polymer Materials Petrochemicals

LYONDELLBASELL “Strategic options” for Houston refinery under review / Divestment most likely course / Analysts see “little interest” in fossil-fired facilities	14.09.2021
SABIC / FUJIAN PETRO Chinese-Arab joint venture for mega petrochemical complex in the southeast of People's Republic	09.09.2021
RAW MATERIALS Ifo Institute: Scarcity increasingly dramatic / Record complaints from German converters / Gloomy forecasts for recovery	09.09.2021
PETROCHEMICAL MARKETS Fire at HIP Petrohemija's Pancevo facility in Serbia / Force majeure declared on ethylene	08.09.2021
PETROCHEMICAL MARKETS EVOH: Bottleneck results from forces majeures on upstream product VAM / Numerous sharp price increases	06.09.2021
PETROCHEMICAL MARKETS Polyethylene: Sabic lifts force majeure / Allocations remain partially in place	02.09.2021
CHEMICAL INDUSTRY GERMANY VCI President Kullmann: “No all-clear for raw material supply” / Industry expects record sales growth / Electricity price cause for concern	02.09.2021
UPDATE - USA Hurricane Ida hammers infrastructure at US Gulf Coast / Numerous petchem plants without power / Forecasts say some production out for up to six weeks	01.09.2021
PLASTICS ECONOMY GERMANY Raw material shortages everywhere / Fatal combination of more demand and less production	31.08.2021
AFYREN French specialist for organic acids to go public / Slight delay for Carling plant	31.08.2021
CORRECTION - PETROCHEMICAL MARKETS Propylene oxide: No force majeure at BASF / Plant for surfactants affected	30.08.2021
USA Hurricane Ida makes landfall near New Orleans / Petrochemical plants shut down, ports closed	30.08.2021
INVISTA Shanghai expansion enters next phase / PA 6.6 capacity to more than double	30.08.2021
RAW MATERIALS CBI says UK stock shortages worst on record; plastics partially to blame / McDonald's halts sales of bottled drinks in UK	25.08.2021
PETROCHEMICAL MARKETS Polyethylene: Naphtha pipeline at Chemelot repaired / Sabic gradually restarting facilities	18.08.2021
CHINA Construction halted at possible record-setting coal chemical facility	17.08.2021
PETROCHEMICAL MARKETS Polyolefins: Limited production at Saudi site Al Jubail due to power failure	13.08.2021
BASF Capacity expansions planned for JV with Sinopec / New tert-butyl acrylate plant to widen the “Verbund”	12.08.2021
RAW MATERIALS Ifo Institute: Shortages hound German construction sector / Plastic products scarce, expensive	11.08.2021
LYONDELLBASELL Restart of olefin, polyolefin units following blast / VAM production may have been idled / CSB starts probe / Workers file lawsuits	10.08.2021
CURRENTA No more hope of survivors / Death toll rises to seven	28.07.2021
UPDATE - CURRENTA Two dead, five missing after explosion at Chempark Leverkusen, Germany	27.07.2021
NOVA CHEMICALS Canadian chemical group continues portfolio streamlining / Sale of tank storage and logistics business in Texas	22.07.2021
PETROCHEMICAL MARKETS ACN: AnQore declares force majeure	19.07.2021
EU CLIMATE POLICY “Fit for 55” leads to hot debates in the industry / EU unveils long-awaited climate package / Transportation to be included in ETS / Chemical and waste sectors mostly on board	19.07.2021

Seite 38 von 106

Topic search

Plastics Information Europe

Polymer Prices (6.377)
- Petrochemicals (573)
- Standard Thermoplastics (1.024)
- PET (259)
- Engineering Thermoplastics (267)
- Recyclate (397)
  - General (6)
  - Standard Thermoplastics / Recyclate (195)
  - Engineering Thermoplastics / Recyclate (196)
- Polyurethanes (260)
- High Performance Polymers (2)
- Composites (193)
- Announcements (2.625)
- World Regions (617)
  - China (314)
    - Standard Thermoplastics (158)
    - Engineering Thermoplastics (156)
  - North America (179)
  - Russia (124)
- Spot Prices (136)
- Forecasts (24)
Companies (36.337)
- Polymer Materials (17.873)
  - Petrochemicals (3.244)
  - Charge (1.926)
    - General (99)
    - Masterbatches (343)
    - Additives (813)
    - Colours (396)
    - Reinforcements/Fillers (275)
  - Polymers (11.501)
    - General (743)
    - Standard Thermoplastics (3.994)
      - General (113)
      - Polyolefins (2.031)
      - Polystyrenes (358)
      - PVC (703)
      - Polyester (580)
      - Expandable (PS, PP, PE) (209)
    - Technical Thermoplastics (3.379)
      - General (352)
      - Styrene Copolymers (275)
      - PC/PMMA (479)
      - Polyamides (956)
      - POM/PBT/PP (329)
      - Technical Compounds (988)
    - PUR (813)
    - Other (2.572)
      - General (105)
      - Composites/Thermosets (414)
      - High Performance (642)
      - Biopolymers (717)
      - Elastomers/TPE (383)
      - Recyclate (311)
  - Distribution (1.202)
- Machinery (1.130)
  - General (32)
  - Plant Construction (145)
  - Core Machines (764)
    - General (92)
    - Extrusion (183)
    - Injection Moulding (384)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (184)
    - General (34)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (99)
    - Components (13)
  - Finishing (5)
- Processing (7.456)
  - General (935)
  - Extrusion (2.422)
    - General (129)
    - Flexible Films (1.172)
    - Rigid Films/Sheet (391)
    - Pipes (358)
    - Profiles/Rods (264)
    - Other (108)
  - Injection Moulding (1.812)
  - Blow Moulding (537)
  - PUR (336)
  - Other (1.167)
    - General (131)
    - Foam (317)
    - Composites/Thermosets (360)
    - Thermoforming (229)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (247)
- Application (7.668)
  - General (139)
  - Packaging (3.312)
  - Construction (757)
  - Automotive / Transport (1.761)
  - Electrical Appliances (354)
  - Consumer Goods (704)
  - Medical (415)
  - Technical (226)
- Other (2.210)
  - Recycling/Disposal (1.767)
  - Services (262)
  - Logistics (181)
Commercial Register (165)
- Insolvency (159)
- Changes (6)
Markets (24.806)
- Polymer Materials (10.692)
  - Petrochemicals (2.635)
  - Charge (889)
    - General (40)
    - Masterbatches (100)
    - Additives (350)
    - Colours (164)
    - Reinforcements/Fillers (235)
  - Polymers (6.761)
    - General (875)
    - Standard Thermoplastics (2.549)
      - General (74)
      - Polyolefins (1.275)
      - Polystyrenes (168)
      - PVC (525)
      - Polyester (364)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.360)
      - General (90)
      - Styrene Copolymers (118)
      - PC/PMMA (163)
      - Polyamides (475)
      - POM/PBT/PP (114)
      - Technical Compounds (400)
    - PUR (477)
    - Other (1.500)
      - General (47)
      - Composites/Thermosets (302)
      - High Performance (314)
      - Biopolymers (443)
      - Elastomers/TPE (148)
      - Recyclate (246)
  - Other Materials (61)
  - Distribution (346)
- Machinery (528)
  - General (133)
  - Plant Construction (15)
  - Core Machines (308)
    - General (118)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.765)
  - General (472)
  - Extrusion (628)
    - General (20)
    - Flexible Films (305)
    - Rigid Films/Sheets (126)
    - Pipes (75)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.377)
  - General (51)
  - Packaging (2.119)
  - Construction (344)
  - Automotive / Transport (1.024)
  - Electrical Appliances (230)
  - Consumer Goods (277)
  - Medical (213)
  - Technical (63)
  - Other (56)
- Regions and Countries (4.218)
  - World (196)
  - German-speaking Countries (501)
  - Europe (2.067)
    - General (508)
    - Italy (148)
    - France (157)
    - Spain/Portugal (106)
    - Great Britain/Ireland (526)
    - Low Countries (75)
    - Central Europe (182)
    - Scandinavia (47)
    - Russia (116)
    - Eastern Europe (59)
    - Southeastern Europe (143)
  - North America (499)
  - Asia (683)
    - General (123)
    - China (393)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (149)
  - Other (40)
  - South America (83)
- Other (3.226)
  - Recycling/Disposal (2.284)
  - Economic Trend (537)
  - Services (41)
  - Logistics (280)
  - Energy (84)
Production and Engineering (3.847)
- Polymer Materials (2.396)
  - Petrochemicals (63)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.857)
    - General (31)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (74)
    - Other (777)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (161)
      - Biopolymers (253)
      - Elastomers/TPE (115)
      - Recyclate (117)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (445)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (42)
  - Process (84)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (871)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (40)
Management (816)
- Purchasing (109)
- General Management (197)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (102)
- Logistics (340)
People (1.515)
Industry (6.647)
- General (1.292)
- Associations/Institutions (2.529)
- Legislation (1.475)
- Environment / Health (1.341)
- plas.TV - Plastics unite(d) (10)
Events (1.186)
Plastic Fantastic (580)
Commentaries (86)
Interviews (165)
Notes by Publisher (81)