Show topic list

Companies Polymers Standard Thermoplastics

NESTE Transformation plans for Porvoo oil refinery / Total investment estimated at EUR 2.5 bn	16.01.2024
INOVYN PVC producer adds sustainable products	15.01.2024
VERSALIS Polyethylene production in Brindisi back online	12.01.2024
SIBUR Russia to raise its own funds for major Amur Gas project / Construction progress seems uncertain	11.01.2024
BEWI New Dutch EPS line to also process recycled material	09.01.2024
COVESTRO Adnoc increases takeover bid again / Middle Eastern petchem group continues push for acquisitions	20.12.2023
LYONDELLBASELL Marine waste becomes part of car component / Partnership yields injection moulded part, resin maker claims	20.12.2023
OMV / ADNOC Borealis, Borouge reportedly on the verge of a merger	15.12.2023
PETROCHEMICAL MARKETS Asia to add most propylene output this decade / Global capacity to increase more than 46% – GlobalData	14.12.2023
TOTALENERGIES Plans with Sabic to sell the styrene/polystyrene plants in US	12.12.2023
TRINSEO Italian PMMA depolymerisation plant nears start	12.12.2023
CITRONIQ Green PP plants in US to use Lummus tech	12.12.2023
GEON Acquisition of TPE manufacturer Polymax	12.12.2023
LUKOIL Evaluation of Bulgarian plants could end in sales / Scrutiny likely to affect plastics ops	08.12.2023
DOW Chemical giant approves spending for ‘net zero' cracker / Plans for Canadian complex include 2 mn t/y of PE capacity	05.12.2023
PVC MARKET European suppliers in fight of their lives / Firms slash production as demand dries up / Plant closure, shift abroad	01.12.2023
UPDATE - LYONDELLBASELL Polyolefin supplier to review profitability of European plants / Management could axe low-margin sites	01.12.2023
BOREALIS Resin maker to buy Bulgarian recycler Integra Plastics	30.11.2023
REPSOL Fire hits production site in Tarragona, Spain	24.11.2023
BRASKEM Billion-euro purchase offer from Adnoc / Emirates group plans to extend downstream value chain	20.11.2023
PVC MARKET EU starts anti-dumping investigation for imports from US and Egypt	16.11.2023
UPDATE - DECEUNINCK Belgian profile maker to close plants in Germany / Production to be shifted to other facilities	15.11.2023
VERSALIS Explosion at Brindisi site / Long-term impact on production unlikely / No injuries reported	15.11.2023
INEOS Sales fall by one-third, led by soft demand in Olefins & Polyolefins Europe	09.11.2023
JBF INDUSTRIES Ambitious PET group collapses / GAIL takes over in India / Fate of Belgian plants unknown	09.11.2023

Seite 21 von 150

Topic search

Plastics Information Europe

Polymer Prices (6.375)
- Petrochemicals (572)
- Standard Thermoplastics (1.024)
- PET (259)
- Engineering Thermoplastics (267)
- Recyclate (397)
  - General (6)
  - Standard Thermoplastics / Recyclate (195)
  - Engineering Thermoplastics / Recyclate (196)
- Polyurethanes (259)
- High Performance Polymers (2)
- Composites (193)
- Announcements (2.625)
- World Regions (617)
  - China (314)
    - Standard Thermoplastics (158)
    - Engineering Thermoplastics (156)
  - North America (179)
  - Russia (124)
- Spot Prices (136)
- Forecasts (24)
Companies (36.289)
- Polymer Materials (17.853)
  - Petrochemicals (3.241)
  - Charge (1.921)
    - General (99)
    - Masterbatches (343)
    - Additives (811)
    - Colours (393)
    - Reinforcements/Fillers (275)
  - Polymers (11.489)
    - General (742)
    - Standard Thermoplastics (3.990)
      - General (113)
      - Polyolefins (2.029)
      - Polystyrenes (358)
      - PVC (702)
      - Polyester (580)
      - Expandable (PS, PP, PE) (208)
    - Technical Thermoplastics (3.374)
      - General (352)
      - Styrene Copolymers (274)
      - PC/PMMA (479)
      - Polyamides (954)
      - POM/PBT/PP (328)
      - Technical Compounds (987)
    - PUR (812)
    - Other (2.571)
      - General (105)
      - Composites/Thermosets (414)
      - High Performance (642)
      - Biopolymers (717)
      - Elastomers/TPE (382)
      - Recyclate (311)
  - Distribution (1.202)
- Machinery (1.130)
  - General (32)
  - Plant Construction (145)
  - Core Machines (764)
    - General (92)
    - Extrusion (183)
    - Injection Moulding (384)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (184)
    - General (34)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (99)
    - Components (13)
  - Finishing (5)
- Processing (7.444)
  - General (935)
  - Extrusion (2.421)
    - General (128)
    - Flexible Films (1.172)
    - Rigid Films/Sheet (391)
    - Pipes (358)
    - Profiles/Rods (264)
    - Other (108)
  - Injection Moulding (1.808)
  - Blow Moulding (535)
  - PUR (335)
  - Other (1.163)
    - General (129)
    - Foam (316)
    - Composites/Thermosets (360)
    - Thermoforming (228)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (247)
- Application (7.657)
  - General (139)
  - Packaging (3.308)
  - Construction (756)
  - Automotive / Transport (1.757)
  - Electrical Appliances (354)
  - Consumer Goods (703)
  - Medical (414)
  - Technical (226)
- Other (2.205)
  - Recycling/Disposal (1.764)
  - Services (261)
  - Logistics (180)
Commercial Register (165)
- Insolvency (159)
- Changes (6)
Markets (24.770)
- Polymer Materials (10.679)
  - Petrochemicals (2.632)
  - Charge (886)
    - General (40)
    - Masterbatches (100)
    - Additives (349)
    - Colours (162)
    - Reinforcements/Fillers (235)
  - Polymers (6.754)
    - General (872)
    - Standard Thermoplastics (2.547)
      - General (74)
      - Polyolefins (1.273)
      - Polystyrenes (168)
      - PVC (525)
      - Polyester (364)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.359)
      - General (90)
      - Styrene Copolymers (117)
      - PC/PMMA (163)
      - Polyamides (475)
      - POM/PBT/PP (114)
      - Technical Compounds (400)
    - PUR (477)
    - Other (1.499)
      - General (47)
      - Composites/Thermosets (302)
      - High Performance (314)
      - Biopolymers (443)
      - Elastomers/TPE (147)
      - Recyclate (246)
  - Other Materials (61)
  - Distribution (346)
- Machinery (528)
  - General (133)
  - Plant Construction (15)
  - Core Machines (308)
    - General (118)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.763)
  - General (470)
  - Extrusion (628)
    - General (20)
    - Flexible Films (305)
    - Rigid Films/Sheets (126)
    - Pipes (75)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.371)
  - General (51)
  - Packaging (2.116)
  - Construction (344)
  - Automotive / Transport (1.022)
  - Electrical Appliances (230)
  - Consumer Goods (276)
  - Medical (213)
  - Technical (63)
  - Other (56)
- Regions and Countries (4.213)
  - World (196)
  - German-speaking Countries (500)
  - Europe (2.064)
    - General (507)
    - Italy (148)
    - France (157)
    - Spain/Portugal (106)
    - Great Britain/Ireland (526)
    - Low Countries (75)
    - Central Europe (181)
    - Scandinavia (47)
    - Russia (116)
    - Eastern Europe (58)
    - Southeastern Europe (143)
  - North America (498)
  - Asia (683)
    - General (123)
    - China (393)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (149)
  - Other (40)
  - South America (83)
- Other (3.216)
  - Recycling/Disposal (2.277)
  - Economic Trend (535)
  - Services (41)
  - Logistics (279)
  - Energy (84)
Production and Engineering (3.847)
- Polymer Materials (2.396)
  - Petrochemicals (63)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.857)
    - General (31)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (74)
    - Other (777)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (161)
      - Biopolymers (253)
      - Elastomers/TPE (115)
      - Recyclate (117)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (445)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (42)
  - Process (84)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (871)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (40)
Management (814)
- Purchasing (109)
- General Management (196)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (102)
- Logistics (339)
People (1.514)
Industry (6.635)
- General (1.288)
- Associations/Institutions (2.525)
- Legislation (1.474)
- Environment / Health (1.338)
- plas.TV - Plastics unite(d) (10)
Events (1.185)
Plastic Fantastic (579)
Commentaries (86)
Interviews (165)
Notes by Publisher (81)