Show topic list

Companies Polymer Materials Polymers

THAILAND Map Ta Phut accidents prompt government to set up new industry control regime / Explosion at Bangkok Synthetics leaves 12 dead / Dozens hurt as chlorine escapes from Aditya Birla Chemicals' plant	09.05.2012
HPCL-MITTAL Guru Gobind Singh refinery and PP plant officially commissioned	09.05.2012
BASF US subsidiary moves to new office building	09.05.2012
ADVANCED Saudi group sets up joint venture with Turkey's Bayegan / Integrated PP plant to go on stream in Turkey in 2015	09.05.2012
PLANTIC TECHNOLOGIES Ultra-high barrier bio-based food packaging launched / Partnership with Braskem boosts renewable content	09.05.2012
WESTLAKE Proposal to acquire Georgia Gulf withdrawn / Plans to liquidate all holdings	08.05.2012
DATONG COAL MINE Construction works for mega petrochemical project kick off / Manufacturing PE, PP and POM from coal	08.05.2012
CIECH CEO Kunicki is replaced / Dow and Wanhua reportedly interested in Zachem's TDI subsidiary	08.05.2012
FEEDSTOCK MARKETS Chinese players sweep in to meet European PA 12 needs / ClickPlastics acts as continental distributor	08.05.2012
BASF Acquisition of Mazzaferro Group's polyamide business / Stronger market position in Brazil	07.05.2012
EVONIK Extruded PMMA sheet joint venture created in South Africa	07.05.2012
CHEVRON PHILLIPS Sweeny picked as location for two new polyethylene lines / Shaw Group will design Cedar Bayou cracker	07.05.2012
PERSTORP Distributor for Mitsubishi co-polyester in Europe / Substitution of other polymers for safety reasons	04.05.2012
EXCLUSIVE INTERVIEW Bayer MaterialScience's relocation to Shanghai has been successful / “No intention whatsoever” to close any European facilities / PC capacity expansion in Shanghai on track / Michael Koenig, head of Polycarbonate business unit, talks to PIE	04.05.2012
EVONIK German group confirms plans for new PA 12 plant in Asia / Gregor Hetzke talks to PIE about the recent explosion in Marl and the company's future plans in Asia / Chinaplas exclusive interview	03.05.2012
BIEGLO Exclusive European distributor for Shandong Dongchen polyamides as well as Panjin Zhongrun's CoPEEK	03.05.2012
LYONDELLBASELL EBITDA sinks 12% year-on-year in Q1 2012 / Improvement seen against final 2011 quarter	02.05.2012
ALPEK Mexican petrochemical giant seeks IPO	02.05.2012
BASF Strong start to 2012 / EBITDA rises more than 15% in Q1 / Margin pressure dogs Plastics	30.04.2012
BAYER Earnings and margins at MaterialScience hit by higher costs in Q1 / EUR 19m gain on full takeover of Baulé	27.04.2012
MITSUI Huge explosion in Iwakuni plant leaves one dead and several wounded / PET production chain down	26.04.2012
DOW New UK technical centre for PU elastomers and systems / Third recent investment in PU innovation	26.04.2012
METABOLIX New office in Cologne, Germany / First representation outside USA	25.04.2012
STYRON Customers said to be broadly supportive of change in polystyrene contract timing	24.04.2012
ARKEMA Two new distributors for “Kynar” PVDF range in Italy	24.04.2012

Seite 276 von 378

Topic search

Plastics Information Europe

Polymer Prices (6.505)
- Petrochemicals (614)
- Standard Thermoplastics (1.050)
- PET (264)
- Engineering Thermoplastics (272)
- Recyclate (405)
  - General (6)
  - Standard Thermoplastics / Recyclate (199)
  - Engineering Thermoplastics / Recyclate (200)
- Polyurethanes (264)
- High Performance Polymers (2)
- Composites (198)
- Announcements (2.635)
- World Regions (632)
  - China (324)
    - Standard Thermoplastics (163)
    - Engineering Thermoplastics (161)
  - North America (184)
  - Russia (124)
- Spot Prices (140)
- Forecasts (29)
Companies (37.098)
- Polymer Materials (18.221)
  - Petrochemicals (3.312)
  - Charge (1.955)
    - General (100)
    - Masterbatches (347)
    - Additives (829)
    - Colours (402)
    - Reinforcements/Fillers (277)
  - Polymers (11.731)
    - General (756)
    - Standard Thermoplastics (4.072)
      - General (114)
      - Polyolefins (2.073)
      - Polystyrenes (364)
      - PVC (722)
      - Polyester (588)
      - Expandable (PS, PP, PE) (211)
    - Technical Thermoplastics (3.443)
      - General (354)
      - Styrene Copolymers (283)
      - PC/PMMA (491)
      - Polyamides (978)
      - POM/PBT/PP (339)
      - Technical Compounds (998)
    - PUR (830)
    - Other (2.630)
      - General (107)
      - Composites/Thermosets (419)
      - High Performance (659)
      - Biopolymers (726)
      - Elastomers/TPE (390)
      - Recyclate (329)
  - Distribution (1.223)
- Machinery (1.143)
  - General (33)
  - Plant Construction (147)
  - Core Machines (770)
    - General (92)
    - Extrusion (184)
    - Injection Moulding (388)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (17)
    - Compression Moulding (4)
  - Peripherals (187)
    - General (36)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (100)
    - Components (13)
  - Finishing (6)
- Processing (7.599)
  - General (948)
  - Extrusion (2.466)
    - General (131)
    - Flexible Films (1.195)
    - Rigid Films/Sheet (398)
    - Pipes (365)
    - Profiles/Rods (265)
    - Other (112)
  - Injection Moulding (1.851)
  - Blow Moulding (552)
  - PUR (343)
  - Other (1.186)
    - General (135)
    - Foam (321)
    - Composites/Thermosets (364)
    - Thermoforming (233)
    - Rotational Moulding (36)
    - Additive Manufacturing (97)
  - Finishing (253)
- Application (7.824)
  - General (144)
  - Packaging (3.376)
  - Construction (769)
  - Automotive / Transport (1.798)
  - Electrical Appliances (360)
  - Consumer Goods (721)
  - Medical (423)
  - Technical (233)
- Other (2.311)
  - Recycling/Disposal (1.844)
  - Services (265)
  - Logistics (202)
Commercial Register (176)
- Insolvency (170)
- Changes (6)
Markets (25.361)
- Polymer Materials (10.922)
  - Petrochemicals (2.694)
  - Charge (897)
    - General (41)
    - Masterbatches (100)
    - Additives (353)
    - Colours (166)
    - Reinforcements/Fillers (237)
  - Polymers (6.915)
    - General (907)
    - Standard Thermoplastics (2.600)
      - General (75)
      - Polyolefins (1.300)
      - Polystyrenes (170)
      - PVC (540)
      - Polyester (372)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.389)
      - General (92)
      - Styrene Copolymers (122)
      - PC/PMMA (167)
      - Polyamides (485)
      - POM/PBT/PP (117)
      - Technical Compounds (406)
    - PUR (487)
    - Other (1.532)
      - General (49)
      - Composites/Thermosets (308)
      - High Performance (319)
      - Biopolymers (446)
      - Elastomers/TPE (151)
      - Recyclate (259)
  - Other Materials (61)
  - Distribution (355)
- Machinery (534)
  - General (134)
  - Plant Construction (15)
  - Core Machines (312)
    - General (119)
    - Extrusion (38)
    - Injection Moulding (132)
    - Blow Moulding (15)
    - PUR (6)
    - Compression Moulding (2)
  - Peripherals (73)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (35)
- Processing (1.780)
  - General (485)
  - Extrusion (630)
    - General (20)
    - Flexible Films (306)
    - Rigid Films/Sheets (126)
    - Pipes (76)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.499)
  - General (54)
  - Packaging (2.185)
  - Construction (357)
  - Automotive / Transport (1.044)
  - Electrical Appliances (236)
  - Consumer Goods (280)
  - Medical (218)
  - Technical (64)
  - Other (61)
- Regions and Countries (4.263)
  - World (197)
  - German-speaking Countries (504)
  - Europe (2.100)
    - General (521)
    - Italy (152)
    - France (158)
    - Spain/Portugal (106)
    - Great Britain/Ireland (533)
    - Low Countries (75)
    - Central Europe (183)
    - Scandinavia (48)
    - Russia (119)
    - Eastern Europe (62)
    - Southeastern Europe (143)
  - North America (502)
  - Asia (684)
    - General (123)
    - China (394)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (152)
  - Other (41)
  - South America (83)
- Other (3.363)
  - Recycling/Disposal (2.366)
  - Economic Trend (564)
  - Services (43)
  - Logistics (302)
  - Energy (88)
Production and Engineering (3.881)
- Polymer Materials (2.417)
  - Petrochemicals (66)
  - Charge (451)
    - General (15)
    - Masterbatches (116)
    - Additives (232)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.868)
    - General (32)
    - Standard Themoplastics (370)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (76)
    - Other (784)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (162)
      - Biopolymers (255)
      - Elastomers/TPE (115)
      - Recyclate (121)
  - Other (32)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (450)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (43)
  - Process (84)
  - Application (97)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (60)
- New Products (879)
  - Packaging (578)
  - Construction (35)
  - Automotive / Transport (103)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (40)
Management (851)
- Purchasing (110)
- General Management (210)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (103)
- Logistics (360)
People (1.520)
Industry (6.835)
- General (1.316)
- Associations/Institutions (2.594)
- Legislation (1.547)
- Environment / Health (1.368)
- plas.TV - Plastics unite(d) (10)
Events (1.198)
Plastic Fantastic (593)
Commentaries (89)
Interviews (170)
Notes by Publisher (85)