Show topic list

Companies Polymer Materials

COVESTRO Steep drop in 2025 earnings following lower selling prices, Dormagen fire / Core profit projected flat in 2026 / Net debt cut after Adnoc capital infusion	27.02.2026
BASF Pace of cost cuts quickens as economic slowdown deepens in final quarter / Profits, sales in Q4 drop on lower prices, currency swings / 2026 forecast shows high uncertainty	27.02.2026
ORLEN Takeover offer for Azoty's polyolefin business to expire end of March	26.02.2026
IMCD Distributor reports slight rise in sales in 2025 / EBITDA declines	26.02.2026
RECYCLING GERMANY 'Strapping is a challenging waste stream that calls for specialists' – PIE interviews Re-Strap founder Matthias Schäfer	25.02.2026
ADVANSIX Polyamide producer could benefit from restrictions in Europe, China / Reports stable figures for 2025	25.02.2026
COVESTRO CEO Steilemann announces departure in 2028	25.02.2026
PETROCHEMICAL MARKETS Sabic restarts LDPE plant in Wilton, UK / Force majeure remains in effect	24.02.2026
DANGOTE Major expansion of PP production planned in Nigeria / Europe targeted for exports	24.02.2026
HUNTSMAN Polyurethanes division under pressure in Europe / CEO sees structural problems, need for consolidation	20.02.2026
CELANESE Compounder expects turnaround from mid-year after difficult 2025 / Future of in-house polymer production unclear	20.02.2026
TOTALENERGIES Petrochemicals perform well in 2025 / Gradual phase-out in Europe conceivable nevertheless / ‘Naphtha has a competitive disadvantage that cannot be offset'	19.02.2026
RECYCLING FINLAND Chemical recycling plant nears completion / Country still well short of 50% packaging reclaim target / Mechanical recovery momentum fades	19.02.2026
EXXONMOBIL Petchem giant cleared to pursue defamation case against California over plastics recycling	18.02.2026
EVONIK Speciality chemicals group reports lower adjusted EBITDA as expected / Difficult environment projected to continue	18.02.2026
PIE INDUSTRY TALK Don't miss your chance to join PIE's first webinar – From Learnings to Earnings: European Plastics Markets 2025-2026	17.02.2026
SOURCE ONE PLASTICS Start of clean-up after major fire / Recycler plans to restart plant in 2026	17.02.2026
PAL PLAST Compounder expands portfolio with fully PCR-based material	17.02.2026
BEWI EPS specialist still in the red from continuing operations / Divestments restore profit but mask deeper operational losses	13.02.2026
QATAR VINYL First PVC plant in gulf nation enters trial phase / Exports to Europe expected	12.02.2026
BIESTERFELD Jonas Borgsten appointed global business director, engineered polymers	12.02.2026
SABIC Global distribution of polyethylene from South Korean Shaheen plant planned / Replacement for PE plants sold in Europe	11.02.2026
KRILL DESIGN Italian SME develops packaging biomaterials from food waste	11.02.2026
GRÄSSLIN Distributor takes on TPV from Turkish manufacturer Elastron	11.02.2026
BUTANEDIOL EU imposes provisional countervailing duties on imports from China, US, Saudi Arabia	10.02.2026

Seite 2 von 486

Topic search

Plastics Information Europe

Polymer Prices (6.295)
- Petrochemicals (556)
- Standard Thermoplastics (1.011)
- PET (257)
- Engineering Thermoplastics (265)
- Recyclate (391)
  - General (6)
  - Standard Thermoplastics / Recyclate (192)
  - Engineering Thermoplastics / Recyclate (193)
- Polyurethanes (257)
- High Performance Polymers (2)
- Composites (191)
- Announcements (2.600)
- World Regions (610)
  - China (309)
    - Standard Thermoplastics (156)
    - Engineering Thermoplastics (153)
  - North America (177)
  - Russia (124)
- Spot Prices (133)
- Forecasts (22)
Companies (35.929)
- Polymer Materials (17.688)
  - Petrochemicals (3.204)
  - Charge (1.904)
    - General (98)
    - Masterbatches (342)
    - Additives (802)
    - Colours (390)
    - Reinforcements/Fillers (272)
  - Polymers (11.384)
    - General (735)
    - Standard Thermoplastics (3.945)
      - General (113)
      - Polyolefins (2.009)
      - Polystyrenes (352)
      - PVC (690)
      - Polyester (575)
      - Expandable (PS, PP, PE) (206)
    - Technical Thermoplastics (3.344)
      - General (352)
      - Styrene Copolymers (266)
      - PC/PMMA (474)
      - Polyamides (945)
      - POM/PBT/PP (325)
      - Technical Compounds (982)
    - PUR (809)
    - Other (2.551)
      - General (104)
      - Composites/Thermosets (414)
      - High Performance (637)
      - Biopolymers (712)
      - Elastomers/TPE (381)
      - Recyclate (303)
  - Distribution (1.196)
- Machinery (1.122)
  - General (31)
  - Plant Construction (144)
  - Core Machines (759)
    - General (92)
    - Extrusion (182)
    - Injection Moulding (380)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (183)
    - General (33)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (99)
    - Components (13)
  - Finishing (5)
- Processing (7.374)
  - General (922)
  - Extrusion (2.407)
    - General (128)
    - Flexible Films (1.166)
    - Rigid Films/Sheet (390)
    - Pipes (355)
    - Profiles/Rods (261)
    - Other (107)
  - Injection Moulding (1.786)
  - Blow Moulding (528)
  - PUR (328)
  - Other (1.157)
    - General (127)
    - Foam (316)
    - Composites/Thermosets (357)
    - Thermoforming (228)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (246)
- Application (7.597)
  - General (134)
  - Packaging (3.282)
  - Construction (751)
  - Automotive / Transport (1.739)
  - Electrical Appliances (354)
  - Consumer Goods (701)
  - Medical (412)
  - Technical (224)
- Other (2.148)
  - Recycling/Disposal (1.720)
  - Services (259)
  - Logistics (169)
Commercial Register (156)
- Insolvency (151)
- Changes (5)
Markets (24.448)
- Polymer Materials (10.548)
  - Petrochemicals (2.593)
  - Charge (880)
    - General (39)
    - Masterbatches (98)
    - Additives (349)
    - Colours (162)
    - Reinforcements/Fillers (232)
  - Polymers (6.673)
    - General (851)
    - Standard Thermoplastics (2.523)
      - General (74)
      - Polyolefins (1.264)
      - Polystyrenes (165)
      - PVC (517)
      - Polyester (360)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.341)
      - General (89)
      - Styrene Copolymers (113)
      - PC/PMMA (161)
      - Polyamides (468)
      - POM/PBT/PP (114)
      - Technical Compounds (396)
    - PUR (475)
    - Other (1.483)
      - General (47)
      - Composites/Thermosets (301)
      - High Performance (312)
      - Biopolymers (438)
      - Elastomers/TPE (147)
      - Recyclate (238)
  - Other Materials (61)
  - Distribution (341)
- Machinery (524)
  - General (131)
  - Plant Construction (14)
  - Core Machines (307)
    - General (117)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.745)
  - General (456)
  - Extrusion (627)
    - General (20)
    - Flexible Films (305)
    - Rigid Films/Sheets (126)
    - Pipes (75)
    - Profiles/Rods (90)
    - Other (11)
  - Injection Moulding (181)
  - Blow Moulding (43)
  - PUR (84)
  - Other (309)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.314)
  - General (51)
  - Packaging (2.088)
  - Construction (337)
  - Automotive / Transport (1.008)
  - Electrical Appliances (228)
  - Consumer Goods (273)
  - Medical (213)
  - Technical (62)
  - Other (54)
- Regions and Countries (4.185)
  - World (196)
  - German-speaking Countries (496)
  - Europe (2.043)
    - General (502)
    - Italy (145)
    - France (155)
    - Spain/Portugal (105)
    - Great Britain/Ireland (521)
    - Low Countries (75)
    - Central Europe (180)
    - Scandinavia (46)
    - Russia (115)
    - Eastern Europe (56)
    - Southeastern Europe (143)
  - North America (498)
  - Asia (682)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (148)
  - Other (40)
  - South America (82)
- Other (3.132)
  - Recycling/Disposal (2.232)
  - Economic Trend (509)
  - Services (41)
  - Logistics (269)
  - Energy (81)
Production and Engineering (3.839)
- Polymer Materials (2.392)
  - Petrochemicals (62)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.854)
    - General (31)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (74)
    - Other (774)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (161)
      - Biopolymers (251)
      - Elastomers/TPE (115)
      - Recyclate (116)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (443)
  - Polymer Materials (145)
  - Technical (16)
  - Product Development (42)
  - Process (83)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (870)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (27)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (39)
Management (788)
- Purchasing (108)
- General Management (185)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (99)
- Logistics (328)
People (1.513)
Industry (6.525)
- General (1.264)
- Associations/Institutions (2.485)
- Legislation (1.442)
- Environment / Health (1.324)
- plas.TV - Plastics unite(d) (10)
Events (1.170)
Plastic Fantastic (574)
Commentaries (85)
Interviews (159)
Notes by Publisher (77)