www.pieweb.com

Polymer Prices Polyurethanes

POLYMER PRICES
Polyurethane feedstocks July 2024: Significant price reductions dominate landscape / Processors put more emphasis on monthly contracts / Demand in holiday mode
22.07.2024
POLYMER PRICES
Polyurethane feedstocks June 2024: Weak demand, well-stocked inventories do not leave room for price hikes / New quarter not expected to see fundamental changes
19.06.2024
POLYMER PRICES
Polyurethane feedstocks May 2024: Upward trend for MDI halts / Demand remains below expectations / Oversupply set to put further pressure on prices
21.05.2024
POLYMER PRICES
Polyurethane feedstocks April 2024: Production problems push prices up / Further upward trend likely to be limited due to weak demand / Some customer segments remain below potential
19.04.2024
POLYMER PRICES
Polyurethane feedstocks March 2024: Prices continue to rise / Higher markups, especially for MDI
19.03.2024
POLYMER PRICES
Polyurethane feedstocks February 2024: Slight upturn for isocyanate prices / Stronger markups for polyols
20.02.2024
POLYMER PRICES
Polyurethane feedstocks January 2024: Weak demand again pressures isocyanate prices / Polyols slightly firmer
22.01.2024
POLYMER PRICES
Polyurethane feedstocks December 2023: Prices likely to fall further in January / Market governed by weak demand
18.12.2023
POLYMER PRICES
Polyurethane feedstocks November 2023: Slight markdowns overall / Price erosion likely to continue with weak demand
21.11.2023
POLYMER PRICES
Polyurethane feedstocks October 2023: Weak demand dominates market / TDI, polyols bottom out / Downward trend for MDI remains intact
19.10.2023
POLYMER PRICES
Polyurethane feedstocks September 2023: Discounts drive market / Trough has been reached / TDI could soon see renewed markups despite low demand
20.09.2023
POLYMER PRICES
Polyurethane feedstocks August 2023: Demand remains weak with stable supply / Hopes rest on September – will next month bring the autumn upturn?
22.08.2023
POLYMER PRICES
Polyurethane feedstocks July 2023: Downward trend set to continue in August / Full warehouses spur producers to underbid one another / Processors face short-time work, job cuts
20.07.2023
POLYMER PRICES
Polyurethane feedstocks June 2023: Reductions for TDI reach 7% / Sparse demand from application areas / Foamers have to hit the brakes
21.06.2023
POLYMER PRICES
Polyurethane feedstocks May 2023: Downward trend for isocyanates continues at slower pace / Polyols show signs of respite / Recovery in demand sluggish
19.05.2023
POLYMER PRICES
Polyurethane feedstocks April 2023: Prices continue to fall amid weak demand / Triple-digit markdowns for TDI / Only soft polyols in rollover / Prices expected to bottom out soon, except for TDI
20.04.2023
POLYMER PRICES
Polyurethane feedstocks March 2023: Downtrend unbroken / Prices could soon bottom out / Demand slow to improve
23.03.2023
POLYMER PRICES
Polyurethane feedstocks February 2023: Price plummet continues / Weak demand, cheap imports apply pressure / Large-scale restocking rare / Downward momentum set to ease in March
20.02.2023
POLYMER PRICES
Polyurethane feedstocks January 2023: Prices under pressure due to subdued demand, cheaper imports / Rising orders to buoy isocyanate prices in February
23.01.2023
POLYMER PRICES
Polyurethane feedstocks December 2022: Weak demand and cheap imports lead to price reductions / More semi-finished and finished goods from Asia / Lack of orders burdens European processors
21.12.2022
POLYMER PRICES
Polyurethane feedstocks November 2022: End of strong price hikes for TDI / Producers grant heavy discounts partially on low demand / Generally more reductions in weeks ahead
22.11.2022
POLYMER PRICES
Polyurethane feedstocks October 2022: TDI soars to astronomical heights / Improvement in demand stabilises / Production cutbacks in intermediate products with barely any consequences so far / Additional price hikes
21.10.2022
POLYMER PRICES
Polyurethane feedstocks September 2022: Catastrophic month for flexible foam / TDI supply heavily thinned / Demand remains weak / Widely firmer price trends in October
22.09.2022
POLYMER PRICES
Polyurethane feedstocks August 2022: Slight discounts dominate the field despite expensive primary products / Demand in summer-holiday mode / TDI likely firmer in September due to plant shutdowns
23.08.2022
POLYMER PRICES
Polyurethane feedstocks July 2022: Weak demand across sectors pushes prices lower / Only building industry shows slight recovery / Rising imports to fuel price declines in September
21.07.2022
Seite 1 von 10
Topic search
Plastics Information Europe
  • Polymer Prices (5.756)
    • Petrochemicals (403)
    • Standard Thermoplastics (898)
    • PET (237)
    • Engineering Thermoplastics (243)
    • Recyclate (345)
      • Standard Thermoplastics / Recyclate (172)
      • Engineering Thermoplastics / Recyclate (173)
    • Polyurethanes (235)
    • High Performance Polymers (2)
    • Composites (171)
    • Announcements (2.547)
    • World Regions (550)
      • China (270)
        • Standard Thermoplastics (136)
        • Engineering Thermoplastics (134)
      • North America (156)
      • Russia (124)
    • Spot Prices (114)
    • Forecasts (11)
  • Companies (32.487)
    • Polymer Materials (16.095)
      • Petrochemicals (2.887)
      • Charge (1.777)
        • General (88)
        • Masterbatches (331)
        • Additives (736)
        • Colours (363)
        • Reinforcements/Fillers (259)
      • Polymers (10.316)
        • General (651)
        • Standard Thermoplastics (3.577)
          • General (112)
          • Polyolefins (1.808)
          • Polystyrenes (318)
          • PVC (628)
          • Polyester (527)
          • Expandable (PS, PP, PE) (184)
        • Technical Thermoplastics (3.065)
          • General (345)
          • Styrene Copolymers (245)
          • PC/PMMA (425)
          • Polyamides (843)
          • POM/PBT/PP (300)
          • Technical Compounds (907)
        • PUR (743)
        • Other (2.280)
          • General (96)
          • Composites/Thermosets (389)
          • High Performance (571)
          • Biopolymers (664)
          • Elastomers/TPE (346)
          • Recyclate (214)
      • Distribution (1.115)
    • Machinery (1.052)
      • General (27)
      • Plant Construction (129)
      • Core Machines (720)
        • General (86)
        • Extrusion (175)
        • Injection Moulding (356)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (172)
        • General (31)
        • Control Systems (4)
        • Automatisation (32)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.735)
      • General (840)
      • Extrusion (2.212)
        • General (110)
        • Flexible Films (1.065)
        • Rigid Films/Sheet (360)
        • Pipes (331)
        • Profiles/Rods (252)
        • Other (94)
      • Injection Moulding (1.613)
      • Blow Moulding (486)
      • PUR (278)
      • Other (1.075)
        • General (114)
        • Foam (298)
        • Composites/Thermosets (332)
        • Thermoforming (206)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (231)
    • Application (6.865)
      • General (125)
      • Packaging (2.961)
      • Construction (682)
      • Automotive / Transport (1.572)
      • Electrical Appliances (319)
      • Consumer Goods (637)
      • Medical (371)
      • Technical (198)
    • Other (1.740)
      • Recycling/Disposal (1.415)
      • Services (244)
      • Logistics (81)
  • Commercial Register (105)
    • Insolvency (100)
    • Changes (5)
  • Markets (21.693)
    • Polymer Materials (9.418)
      • Petrochemicals (2.283)
      • Charge (827)
        • General (38)
        • Masterbatches (90)
        • Additives (328)
        • Colours (152)
        • Reinforcements/Fillers (219)
      • Polymers (5.950)
        • General (678)
        • Standard Thermoplastics (2.291)
          • General (74)
          • Polyolefins (1.136)
          • Polystyrenes (151)
          • PVC (472)
          • Polyester (325)
          • Expandable (PS, PP, PE) (133)
        • Technical Thermoplastics (1.220)
          • General (87)
          • Styrene Copolymers (98)
          • PC/PMMA (141)
          • Polyamides (416)
          • POM/PBT/PP (106)
          • Technical Compounds (372)
        • PUR (434)
        • Other (1.327)
          • General (43)
          • Composites/Thermosets (286)
          • High Performance (292)
          • Biopolymers (412)
          • Elastomers/TPE (132)
          • Recyclate (162)
      • Other Materials (57)
      • Distribution (301)
    • Machinery (495)
      • General (127)
      • Plant Construction (14)
      • Core Machines (283)
        • General (106)
        • Extrusion (36)
        • Injection Moulding (120)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.626)
      • General (398)
      • Extrusion (592)
        • General (20)
        • Flexible Films (288)
        • Rigid Films/Sheets (115)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (10)
      • Injection Moulding (176)
      • Blow Moulding (43)
      • PUR (76)
      • Other (297)
        • General (20)
        • Foam (75)
        • Composites/Thermosets (136)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.779)
      • General (34)
      • Packaging (1.808)
      • Construction (288)
      • Automotive / Transport (908)
      • Electrical Appliances (211)
      • Consumer Goods (237)
      • Medical (194)
      • Technical (55)
      • Other (44)
    • Regions and Countries (3.974)
      • World (194)
      • German-speaking Countries (464)
      • Europe (1.917)
        • General (456)
        • Italy (142)
        • France (153)
        • Spain/Portugal (96)
        • Great Britain/Ireland (496)
        • Low Countries (74)
        • Central Europe (172)
        • Scandinavia (44)
        • Russia (101)
        • Eastern Europe (45)
        • Southeastern Europe (138)
      • North America (475)
      • Asia (667)
        • General (118)
        • China (389)
        • Japan (49)
        • Korea (26)
        • India (85)
      • Middle East (140)
      • Other (37)
      • South America (80)
    • Other (2.401)
      • Recycling/Disposal (1.816)
      • Economic Trend (311)
      • Services (40)
      • Logistics (182)
      • Energy (52)
  • Production and Engineering (3.610)
    • Polymer Materials (2.261)
      • Petrochemicals (53)
      • Charge (430)
        • General (12)
        • Masterbatches (110)
        • Additives (220)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.748)
        • General (28)
        • Standard Themoplastics (351)
        • Technical Thermoplastics (584)
          • General (19)
          • Styrene Copolymers (61)
          • PC/PMMA (62)
          • Polyamides (198)
          • POM/PBT/PP (65)
          • Technical Compounds (179)
        • PUR (66)
        • Other (719)
          • General (21)
          • Composites/Thermosets (106)
          • High Performance (158)
          • Biopolymers (231)
          • Elastomers/TPE (109)
          • Recyclate (94)
      • Other (30)
    • Machinery (94)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (406)
      • Polymer Materials (135)
      • Technical (12)
      • Product Development (40)
      • Process (78)
      • Application (87)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (50)
    • New Products (811)
      • Packaging (529)
      • Construction (33)
      • Automotive / Transport (97)
      • Electrical Appliances (26)
      • Consumer Goods (47)
      • Medical (36)
      • Technical (7)
      • Other (36)
    • Other (38)
  • Management (593)
    • Purchasing (96)
    • General Management (123)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (7)
    • Finances (85)
    • Logistics (225)
  • People (1.455)
  • Industry (5.499)
    • General (1.107)
    • Associations/Institutions (2.132)
    • Legislation (1.141)
    • Environment / Health (1.109)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.112)
  • Plastic Fantastic (503)
  • Commentaries (77)
  • Interviews (122)
  • Notes by Publisher (68)
Energy Cost Surcharges
Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 25/07/2024
Ref: pswkap55yfsdd055hiiyp255
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_248483&node=100075