Show topic list

Polymer Prices Recyclate Standard Thermoplastics / Recyclate

POLYMER PRICES Standard recyclate November: Situation remains challenging for recyclers / Prices move sideways / No recovery expected before year-end	17.11.2025
POLYMER PRICES Standard recyclate October: Prices continue to decline in most cases / Further pressure likely in November	16.10.2025
WHITE PAPER ON RECYCLATES Prognosis in three scenarios: The development of PCR prices up to 2032 / Joint white paper by Porsche Consulting, TecPart, and KI.PIE Group	02.10.2025
POLYMER PRICES Standard recyclate September: Prices remain under pressure / Demand weakness perpetuates / Recyclers aim to keep prices stable in October	16.09.2025
POLYMER PRICES Standard recyclate August: Prices remain at previous month's level / Recyclers experience eroded margins / Little improvement expected for September	15.08.2025
POLYMER PRICES Standard Recyclate July: Weak demand leads to widespread production cutbacks / Off-spec material puts additional pressure on prices	17.07.2025
POLYMER PRICES Standard recyclate June: Expensive input material, cheap virgin material, many imports – a toxic cocktail for producers / Uncertain development in July	16.06.2025
POLYMER PRICES Standard recyclate May: Heterogenous price development / Construction, logistics sectors pick up slightly / Off-spec material, imports generate pressure	15.05.2025
POLYMER PRICES Standard recyclate April: Demand increases slightly but no sign of a turnaround / Recyclers still under strong cost pressure / Small boom in PET market	16.04.2025
POLYMER PRICES Standard recyclate March: Prices trending up / Supply, demand largely unchanged / Will the PRSE trade fair bring a turnaround?	18.03.2025
POLYMER PRICES Standard recyclate February: Rollover, slight premiums characterise pricing landscape / Seasonal effects expected to increase demand	14.02.2025
POLYMER PRICES Standard recyclate January: Prices mostly roll over again / Demand remains weak / Imports further distort market	16.01.2025
POLYMER PRICES Standard recyclate December: High stocks paired with low volume calls / Extended plant holidays at many companies / No improvement expected in January	13.12.2024
POLYMER PRICES Standard recyclate November: Weak demand puts further pressure on prices / Processors reduce stocks before year-end	15.11.2024
POLYMER PRICES Standard recyclate October: Year drags to a close / Weak demand, declining prices / Inventory reduction dominates	18.10.2024
POLYMER PRICES Standard recyclate September: Prices remain mostly stable / Sluggish demand despite end of holidays / Little change likely in October	16.09.2024
POLYMER PRICES Standard recyclate August 2024: Market takes a summer break / Prices mostly rollover amid weak demand / More buoyancy expected in September	16.08.2024
POLYMER PRICES Standard recyclate July 2024: Summer, summer, summer – high stock levels and next to no demand / Everyone on the lookout for sales / Hopes pinned on September	17.07.2024
POLYMER PRICES Standard recyclate June 2024: Declining prices for almost all materials / No positive stimuli ahead of summer slump	14.06.2024
POLYMER PRICES Standard recyclate May 2024: Most prices gain buoyancy / Increased purchase costs cause problems for recyclers	16.05.2024
POLYMER PRICES Standard recyclate April 2024: Low demand keeps recyclers under pressure / Increasing imports of favourably priced virgin material cause grief	16.04.2024
POLYMER PRICES Standard recyclate March 2024: Prices continue to trend upwards / More expensive virgin material increases attractiveness of recycled grades	14.03.2024
POLYMER PRICES Standard recyclate February 2024: Sharp rise in virgin material prices fuels recyclate quotations / Upward trend likely to continue	15.02.2024
POLYMER PRICES Standard recyclate January 2024: Recyclers keep prices stable in January, thanks to processors replenishing their stocks / PET price drop seems to have stopped	17.01.2024
POLYMER PRICES Standard recyclate December 2023: Special offers put pressure on quotations / Demand remains weak / Delayed production start in January could stabilise price levels	13.12.2023

Seite 1 von 8

Topic search

Plastics Information Europe

Polymer Prices (6.179)
- Petrochemicals (524)
- Standard Thermoplastics (989)
- PET (253)
- Engineering Thermoplastics (260)
- Recyclate (383)
  - General (5)
  - Standard Thermoplastics / Recyclate (189)
  - Engineering Thermoplastics / Recyclate (189)
- Polyurethanes (252)
- High Performance Polymers (2)
- Composites (187)
- Announcements (2.583)
- World Regions (598)
  - China (302)
    - Standard Thermoplastics (152)
    - Engineering Thermoplastics (150)
  - North America (172)
  - Russia (124)
- Spot Prices (130)
- Forecasts (18)
Companies (35.350)
- Polymer Materials (17.418)
  - Petrochemicals (3.152)
  - Charge (1.880)
    - General (90)
    - Masterbatches (342)
    - Additives (791)
    - Colours (386)
    - Reinforcements/Fillers (271)
  - Polymers (11.202)
    - General (724)
    - Standard Thermoplastics (3.884)
      - General (113)
      - Polyolefins (1.975)
      - Polystyrenes (348)
      - PVC (677)
      - Polyester (568)
      - Expandable (PS, PP, PE) (203)
    - Technical Thermoplastics (3.295)
      - General (351)
      - Styrene Copolymers (263)
      - PC/PMMA (468)
      - Polyamides (922)
      - POM/PBT/PP (321)
      - Technical Compounds (970)
    - PUR (799)
    - Other (2.500)
      - General (101)
      - Composites/Thermosets (412)
      - High Performance (625)
      - Biopolymers (706)
      - Elastomers/TPE (374)
      - Recyclate (282)
  - Distribution (1.184)
- Machinery (1.113)
  - General (29)
  - Plant Construction (143)
  - Core Machines (755)
    - General (91)
    - Extrusion (181)
    - Injection Moulding (379)
    - Blow Moulding (72)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (181)
    - General (32)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (98)
    - Components (13)
  - Finishing (5)
- Processing (7.269)
  - General (909)
  - Extrusion (2.377)
    - General (125)
    - Flexible Films (1.148)
    - Rigid Films/Sheet (385)
    - Pipes (352)
    - Profiles/Rods (260)
    - Other (107)
  - Injection Moulding (1.762)
  - Blow Moulding (520)
  - PUR (319)
  - Other (1.141)
    - General (123)
    - Foam (311)
    - Composites/Thermosets (355)
    - Thermoforming (223)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (241)
- Application (7.475)
  - General (131)
  - Packaging (3.228)
  - Construction (738)
  - Automotive / Transport (1.712)
  - Electrical Appliances (347)
  - Consumer Goods (694)
  - Medical (405)
  - Technical (220)
- Other (2.075)
  - Recycling/Disposal (1.666)
  - Services (256)
  - Logistics (153)
Commercial Register (145)
- Insolvency (140)
- Changes (5)
Markets (23.951)
- Polymer Materials (10.338)
  - Petrochemicals (2.540)
  - Charge (871)
    - General (38)
    - Masterbatches (97)
    - Additives (345)
    - Colours (160)
    - Reinforcements/Fillers (231)
  - Polymers (6.531)
    - General (827)
    - Standard Thermoplastics (2.478)
      - General (74)
      - Polyolefins (1.240)
      - Polystyrenes (161)
      - PVC (506)
      - Polyester (356)
      - Expandable (PS, PP, PE) (141)
    - Technical Thermoplastics (1.308)
      - General (89)
      - Styrene Copolymers (108)
      - PC/PMMA (157)
      - Polyamides (452)
      - POM/PBT/PP (112)
      - Technical Compounds (390)
    - PUR (469)
    - Other (1.449)
      - General (47)
      - Composites/Thermosets (298)
      - High Performance (306)
      - Biopolymers (435)
      - Elastomers/TPE (143)
      - Recyclate (220)
  - Other Materials (60)
  - Distribution (336)
- Machinery (521)
  - General (130)
  - Plant Construction (14)
  - Core Machines (305)
    - General (115)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.726)
  - General (446)
  - Extrusion (623)
    - General (20)
    - Flexible Films (302)
    - Rigid Films/Sheets (126)
    - Pipes (74)
    - Profiles/Rods (90)
    - Other (11)
  - Injection Moulding (180)
  - Blow Moulding (43)
  - PUR (82)
  - Other (307)
    - General (20)
    - Foam (80)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.220)
  - General (47)
  - Packaging (2.046)
  - Construction (323)
  - Automotive / Transport (991)
  - Electrical Appliances (225)
  - Consumer Goods (264)
  - Medical (210)
  - Technical (61)
  - Other (53)
- Regions and Countries (4.146)
  - World (195)
  - German-speaking Countries (491)
  - Europe (2.018)
    - General (491)
    - Italy (145)
    - France (155)
    - Spain/Portugal (103)
    - Great Britain/Ireland (514)
    - Low Countries (75)
    - Central Europe (179)
    - Scandinavia (46)
    - Russia (113)
    - Eastern Europe (54)
    - Southeastern Europe (143)
  - North America (496)
  - Asia (680)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (27)
    - India (87)
  - Middle East (144)
  - Other (40)
  - South America (82)
- Other (3.000)
  - Recycling/Disposal (2.163)
  - Economic Trend (470)
  - Services (41)
  - Logistics (253)
  - Energy (73)
Production and Engineering (3.808)
- Polymer Materials (2.372)
  - Petrochemicals (60)
  - Charge (443)
    - General (14)
    - Masterbatches (112)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.838)
    - General (30)
    - Standard Themoplastics (367)
    - Technical Thermoplastics (603)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (208)
      - POM/PBT/PP (69)
      - Technical Compounds (180)
    - PUR (73)
    - Other (765)
      - General (22)
      - Composites/Thermosets (108)
      - High Performance (160)
      - Biopolymers (249)
      - Elastomers/TPE (114)
      - Recyclate (112)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (438)
  - Polymer Materials (144)
  - Technical (15)
  - Product Development (41)
  - Process (83)
  - Application (93)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (864)
  - Packaging (569)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (27)
  - Consumer Goods (50)
  - Medical (37)
  - Technical (8)
  - Other (38)
- Other (39)
Management (748)
- Purchasing (105)
- General Management (171)
- Company organisation (44)
- Marketing/Sales (15)
- Human Resources (7)
- Finances (97)
- Logistics (309)
People (1.505)
Industry (6.370)
- General (1.240)
- Associations/Institutions (2.427)
- Legislation (1.393)
- Environment / Health (1.300)
- plas.TV - Plastics unite(d) (10)
Events (1.162)
Plastic Fantastic (561)
Commentaries (84)
Interviews (149)
Notes by Publisher (73)

More about

Alcoa Borealis European Central Bank Messe Düsseldorf mtm plastics Plastics Europe Porsche Consulting Praktiker Shell SR-Schwarzataler Recycling TecPart TotalEnergies

Donald Trump

Energy Cost Surcharges

Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team

Price survey methodology