Sayanskkhimplast

A year of war takes toll on Russian plastics, chemical industries / State payments support refineries

Russia August 2020: Polyethylene availability very low / Simultaneous outages and maintenance on plants at four producers / Notations set to continue upward trend in September

Russia July 2020: Notations rising in all segments / Only PET with notable reductions still

Russia July 2016: Mostly smooth sailing / Angarsk hub resumes production only to suffer renewed technical glitch / Poor demand takes LDPE down / Tight availability drives PVC further up

Russia June 2016: Summer months bring calm to markets / Angarsk hub about to restart? / Only PVC continues to rise / Stability expected in July

Russian PVC producer looking for a new owner? / Operations still down amid lack of ethylene feedstock / Rosneft tapped as logical fit

Russia May 2016: Most notations roll over / Despite slide, LDPE remains high-priced / PVC still inching up following outage in Angarsk / Little change expected for June

Russia April 2016: Maintenance and FM takes LDPE up / HDPE crumbles / Logistical problems drive up PP and PS / PVC and PET see gains

Russia March 2016: Force majeure at Angarsk continues to drive PVC up / LDPE also rising / HDPE injection moulding grades slide, correcting earlier imbalance / No significant changes for PP and PS

Russia February 2016: Force majeure at Angarsk production hub lifts PVC and LDPE notations / All other grades mostly tread water / Exchange rate fluctuations propel PET higher once again

Russia August 2015: Rise in rouble-based notations / Prohibitive costs lead several converters to shut down their operations / Producers seek refuge in export channel / Volatile exchange rate drives prices down in euro-terms / No relief in sight

Russia June 2015: Rises across the board / PET the sole exception / Uptrend unlikely to end in July as maintenance season gets underway

Russia March 2015: Large export shipments and technical problems drive up LDPE prices / PVC producers take advantage of lack of imports to hike notations / Stavrolen to resume HDPE production in April / Further predictions remain difficult

Russia February 2015: Little market activity / Slight rises for most polymers / Only HDPE blow moulding, EPS and homo PP pointing down / Volatile exchange rate could lead to additional increases in March

Russia March 2013: Notations mostly point down in final month of Q1 / LDPE proves the exception as film season gets underway / PVC and PET treading water / Mixed start to Q2

Market for standard thermoplastics grapples with old and new challenges / WTO entry will force lower import tariffs that could further pressure local producers / Price developments similar to western Europe