Polymer Prices Recyclate Engineering Thermoplastics / Recyclate

POLYMER PRICES Engineering recyclate June 2020: Prices recover after last month's crash / Occasional reductions for automotive grades / Regrinders look to reduce high purchasing costs	18.06.2020
POLYMER PRICES Engineering recyclate May 2020: Reductions of as much as EUR 300/t / Large-scale cancelling of orders / Most recycling line production cut back or shut down	19.05.2020
POLYMER PRICES Engineering recyclate April 2020: Most recycled material suppliers take prices over into April / Processing comes to a standstill and restricts plastics scrap availability / Price cuts probable	20.04.2020
POLYMER PRICES Engineering recyclate March 2020: Reductions only for recycled polyamide 6.6 GF and polycarbonate / Supply plentiful / Wide-ranging price cuts expected in April / Fall in virgin material prices and coronavirus-related slump in demand	19.03.2020
POLYMER PRICES Engineering Recyclate February 2020: Recycled ABS, PA and PC see a few price cuts / Weak demand slows business considerably / Coronavirus delays mould supplies from China	19.02.2020
POLYMER PRICES Engineering Recyclate January 2020: Poor demand leads to rollovers everywhere / Prices may have bottomed out in many cases / PA 6.6 recyclate unlikely to escape reductions	21.01.2020
POLYMER PRICES Engineering Recyclate December 2019: Prices down for nearly all regrind types / Significantly weaker demand at year-end / Nevertheless surprisingly strong order-book situation for January and February	19.12.2019
POLYMER PRICES Engineering Recyclate November 2019: Notations unchanged with an uninspiring month / Demand picks up only slightly / Pressure from primary sector continues	20.11.2019
POLYMER PRICES Engineering Recyclate October 2019: Prices roll over / Demand very weak for the time of year / Many recyclate producers have their backs to the wall / Gap between primary and secondary PA is too small	18.10.2019
POLYMER PRICES Engineering Recyclate September 2019: First price cuts in mid-month / Order activity expected to remain slow in October / Price cuts likely to spread	19.09.2019
POLYMER PRICES Engineering Recyclate August 2019: Only a few minor price reductions / Rollover predicted across the board in September	20.08.2019
POLYMER PRICES Engineering Recyclate July 2019: Notations give way across the board / Only recycled polyamide 6.6 and certain rPOM and rPC grades escaping downtrend / Decline set to affect all materials in August	19.07.2019
POLYMER PRICES Engineering Recyclate June 2019: Minor corrections with ABS and polycarbonate / Sluggish demand in automotive segment / Overall demand for regrind material nevertheless good / Price cuts likely with PA and PP compounds	20.06.2019
POLYMER PRICES Engineering Recyclate May 2019: Secondary market quiet / Recycled PP compounds an exception / Demand improves slowly / Little change likely in June	20.05.2019
POLYMER PRICES Engineering Recyclate April 2019: Notations largely stabilise / Only occasional softening with rPA 6 and rPC / Little change expected in May	18.04.2019
POLYMER PRICES Engineering Recyclate March 2019: Weak volume calls from automotive industry depress prices / Some further discounts in April	20.03.2019
POLYMER PRICES Engineering Recyclate February 2019: Most prices roll over as expected / Little movement likely in March / Demand picking up / Reasonable supply of base material and situation easing with PA 6.6	20.02.2019
POLYMER PRICES Engineering Recyclate January 2019: Rollover for all types / Prices unlikely to move much until Q2 / Surprisingly strong automotive demand / Situation with base material eases	21.01.2019
POLYMER PRICES Engineering Recyclate December 2018: Significant reductions with some regrind types / PA 6.6 feedstocks still short and expensive / Demand far weaker than in previous years / Automotive segment continues tending weak	20.12.2018
POLYMER PRICES Engineering Recyclate November 2018: Weak demand from automotive industry erodes prices for rABS, rPC and rPP compounds / Primary market fuels strong rPA 6.6 increase / Demand remains below expectations	21.11.2018
POLYMER PRICES Engineering Recyclate October 2018: Rollovers dominate / Production largely running normally / Demand weakens / More movement expected next month	19.10.2018
POLYMER PRICES Engineering Recyclate September 2018: General rollover in September / Upcoming hikes for polyamides set to also push up recyclates / Strong production month expected	21.09.2018
POLYMER PRICES Engineering Recyclate August 2018: General uptrend loses momentum / Some notations slightly up, others take a breather / Holiday season puts damper on demand	21.08.2018
POLYMER PRICES Engineering Recyclate July 2018: Primary product increases roll through secondary market / Large hikes for rPA 6.6 and rPC / Brisk demand continues / Varying trends in August	19.07.2018
POLYMER PRICES Engineering Recyclate June 2018: Bottleneck for rPA 6.6 dogs market / Dramatic hikes / rPC consistently tight / Demand still lively / More increases sure to come in July	20.06.2018

Seite 2 von 6

Topic search

Plastics Information Europe

Polymer Prices (4.456)
- Petrochemicals (219)
- Standard Thermoplastics (644)
- PET (188)
- Engineering Thermoplastics (192)
- Recyclate (247)
  - Standard Thermoplastics / Recyclate (123)
  - Engineering Thermoplastics / Recyclate (124)
- Polyurethanes (186)
- High Performance Polymers (2)
- Composites (122)
- Announcements (2.212)
- World Regions (381)
  - China (172)
    - Standard Thermoplastics (87)
    - Engineering Thermoplastics (85)
  - North America (107)
  - Russia (102)
- Spot Prices (63)
Companies (24.084)
- Polymer Materials (11.832)
  - Petrochemicals (2.084)
  - Charge (1.437)
    - General (65)
    - Masterbatches (278)
    - Additives (584)
    - Colours (283)
    - Reinforcements/Fillers (227)
  - Polymers (7.421)
    - General (410)
    - Standard Thermoplastics (2.657)
      - General (89)
      - Polyolefins (1.305)
      - Polystyrenes (221)
      - PVC (497)
      - Polyester (397)
      - Expandable (PS, PP, PE) (148)
    - Technical Thermoplastics (2.205)
      - General (294)
      - Styrene Copolymers (168)
      - PC/PMMA (286)
      - Polyamides (575)
      - POM/PBT/PP (198)
      - Technical Compounds (684)
    - PUR (537)
    - Other (1.612)
      - General (78)
      - Composites/Thermosets (327)
      - High Performance (416)
      - Biopolymers (486)
      - Elastomers/TPE (254)
      - Recyclate (51)
  - Distribution (890)
- Machinery (951)
  - General (20)
  - Plant Construction (106)
  - Core Machines (661)
    - General (75)
    - Extrusion (159)
    - Injection Moulding (332)
    - Blow Moulding (65)
    - Foam (10)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (160)
    - General (28)
    - Control Systems (4)
    - Automatisation (29)
    - Dies/Tools/Moulds (86)
    - Components (13)
  - Finishing (4)
- Processing (5.445)
  - General (679)
  - Extrusion (1.784)
    - General (83)
    - Flexible Films (836)
    - Rigid Films/Sheet (300)
    - Pipes (279)
    - Profiles/Rods (213)
    - Other (73)
  - Injection Moulding (1.307)
  - Blow Moulding (388)
  - PUR (213)
  - Other (881)
    - General (96)
    - Foam (235)
    - Composites/Thermosets (295)
    - Thermoforming (163)
    - Rotational Moulding (26)
    - Additive Manufacturing (66)
  - Finishing (193)
- Application (5.106)
  - General (90)
  - Packaging (2.105)
  - Construction (527)
  - Automotive / Transport (1.259)
  - Electrical Appliances (261)
  - Consumer Goods (421)
  - Medical (298)
  - Technical (145)
- Other (750)
  - Recycling/Disposal (590)
  - Services (160)
Commercial Register (72)
- Insolvency (67)
- Changes (5)
Markets (15.341)
- Polymer Materials (6.608)
  - Petrochemicals (1.556)
  - Charge (667)
    - General (32)
    - Masterbatches (78)
    - Additives (252)
    - Colours (113)
    - Reinforcements/Fillers (192)
  - Polymers (4.181)
    - General (331)
    - Standard Thermoplastics (1.758)
      - General (47)
      - Polyolefins (864)
      - Polystyrenes (109)
      - PVC (370)
      - Polyester (255)
      - Expandable (PS, PP, PE) (113)
    - Technical Thermoplastics (855)
      - General (75)
      - Styrene Copolymers (58)
      - PC/PMMA (109)
      - Polyamides (290)
      - POM/PBT/PP (67)
      - Technical Compounds (256)
    - PUR (318)
    - Other (919)
      - General (31)
      - Composites/Thermosets (235)
      - High Performance (228)
      - Biopolymers (298)
      - Elastomers/TPE (100)
      - Recyclate (27)
  - Other Materials (12)
  - Distribution (192)
- Machinery (439)
  - General (110)
  - Plant Construction (12)
  - Core Machines (249)
    - General (88)
    - Extrusion (32)
    - Injection Moulding (108)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (68)
    - General (21)
    - Automatisation (14)
    - Dies/Tools/Moulds (33)
- Processing (1.362)
  - General (294)
  - Extrusion (501)
    - General (18)
    - Flexible Films (235)
    - Rigid Films/Sheets (98)
    - Pipes (66)
    - Profiles/Rods (77)
    - Other (7)
  - Injection Moulding (172)
  - Blow Moulding (39)
  - PUR (60)
  - Other (254)
    - General (19)
    - Foam (56)
    - Composites/Thermosets (129)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (22)
  - Finishing (42)
- Applications (2.546)
  - General (21)
  - Packaging (1.079)
  - Construction (224)
  - Automotive / Transport (702)
  - Electrical Appliances (172)
  - Consumer Goods (136)
  - Medical (143)
  - Technical (41)
  - Other (28)
- Regions and Countries (3.513)
  - World (170)
  - German-speaking Countries (392)
  - Europe (1.707)
    - General (383)
    - Italy (129)
    - France (151)
    - Spain/Portugal (77)
    - Great Britain/Ireland (456)
    - Low Countries (73)
    - Central Europe (167)
    - Scandinavia (41)
    - Russia (83)
    - Eastern Europe (38)
    - Southeastern Europe (109)
  - North America (403)
  - Asia (596)
    - General (104)
    - China (345)
    - Japan (47)
    - Korea (24)
    - India (76)
  - Middle East (135)
  - Other (34)
  - South America (76)
- Other (873)
  - Recycling/Disposal (778)
  - Economic Trend (60)
  - Services (29)
  - Logistics (6)
Production and Engineering (2.576)
- Polymer Materials (1.667)
  - Petrochemicals (27)
  - Charge (338)
    - General (12)
    - Masterbatches (77)
    - Additives (175)
    - Colours (39)
    - Reinforcements/Fillers (35)
  - Polymers (1.277)
    - General (15)
    - Standard Themoplastics (247)
    - Technical Thermoplastics (478)
      - General (17)
      - Styrene Copolymers (45)
      - PC/PMMA (48)
      - Polyamides (162)
      - POM/PBT/PP (52)
      - Technical Compounds (154)
    - PUR (54)
    - Other (483)
      - General (17)
      - Composites/Thermosets (93)
      - High Performance (123)
      - Biopolymers (157)
      - Elastomers/TPE (89)
      - Recyclate (4)
  - Other (25)
- Machinery (86)
  - Extrusion (19)
    - General (8)
    - Flexible Films (4)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (26)
- Research (251)
  - Polymer Materials (89)
  - Technical (10)
  - Product Development (27)
  - Process (57)
  - Application (49)
  - Patents (2)
    - Polymer Materials (1)
    - Process (1)
  - Other (17)
- New Products (547)
  - Packaging (340)
  - Construction (26)
  - Automotive / Transport (71)
  - Electrical Appliances (21)
  - Consumer Goods (31)
  - Medical (27)
  - Technical (7)
  - Other (24)
- Other (25)
Management (166)
- Purchasing (25)
- General Management (50)
- Company organisation (37)
- Marketing/Sales (8)
- Human Resources (3)
- Finances (36)
- Logistics (7)
People (1.257)
Industry (2.974)
- General (677)
- Associations/Institutions (1.264)
- Legislation (653)
- Environment / Health (370)
- plas.TV - Plastics unite(d) (10)
Events (981)
Plastic Fantastic (356)
Commentaries (52)
Interviews (61)
Notes by Publisher (28)

More about

BASF Domo Caproleuna Ineos LyondellBasell Pinnacle Repsol Rhodia Sabic Ticona TotalEnergies Volkswagen