www.pieweb.com
Strengthen your position in business negotiations!
  • European market reports for standard and engineering,
    thermoplastics, polyurethanes, recyclate, composites/GRP,
    feedstocks – more than 100 grades of polymer covered.
  • MyPrices – individually configured reports and e-mail alerts
  • Comparative and analytical tools

Polymer Prices Recyclate Engineering Thermoplastics / Recyclate

POLYMER PRICES
Engineering Recyclate April 2018: Little change this month / Upturn probable in coming weeks / Demand quite reasonable of late / Still minor delivery delays
20.04.2018
POLYMER PRICES
Engineering Recyclate March 2018: Respite for price rises / rPA 6.6 and rPOM nevertheless on the up / rABS and rPA 6 rather quiet / rPC awaits next surge
19.03.2018
POLYMER PRICES
Engineering Recyclate February 2018: Prices for all types on the up / Extremely tight supply situation with base material / No relief on the horizon / Significantly longer delivery times
19.02.2018
POLYMER PRICES
Engineering Recyclate January 2018: Rollovers predominate in December / Hikes probably only as of February / Base material scarce and expensive in part / Order situation still good
19.01.2018
POLYMER PRICES
Engineering Recyclate December 2017: Only a few minor increases / Strong demand for regrind material expected in new year / Availability of base material likely to deteriorate
21.12.2017
POLYMER PRICES
Engineering Recyclate November 2017: Prices remain unchanged apart from ABS / Tense situation with base material / Strong demand for time of year / Stability should prevail until end of 2017 / Small increases likely in January for some products
20.11.2017
POLYMER PRICES
Engineering Recyclate October 2017: Prices move in different directions / Uptrend for rABS, rPOM, rPP and rPC/ABS blends / Some decreases for rPA 6 / Demand reasonable / Base material remains expensive
18.10.2017
POLYMER PRICES
Engineering Recyclate September 2017: Recycled ABS and PP compounds up slightly / Demand grows after holiday season / Few supply restrictions / Base material remains expensive
21.09.2017
POLYMER PRICES
Engineering Recyclate August 2017: Prices rollover in all cases / Base material remains expensive / Situation eased by fall in demand / Minor reductions likely for rPA and rPOM in September / Secondary PP compounds tending upwards
21.08.2017
POLYMER PRICES
Engineering Recyclate July 2017: Prices calm down as the holiday season gets underway / Stability predominates / Only rPOM rises again / Next few weeks likely quiet
21.07.2017
POLYMER PRICES
Engineering Recyclate June 2017: PC and POM regrind material partly see marked increases / Lively demand from all segments / Rollover probable in July with the exception of polyamides
23.06.2017
POLYMER PRICES
Engineering Recyclate May 2017: Most prices tend sideways / June expected to see only little price movement as adjustments on the primary market trickle through / Ongoing strong demand likely to ease
22.05.2017
POLYMER PRICES
Engineering Recyclate April 2017: Recent price increases across the entire portfolio / Boom in demand / Availability of production scrap considerably tighter in some cases / Demand only minimally slowed by holiday period
24.04.2017
POLYMER PRICES
Engineering Recyclate March 2017: Massive price increases / Peak still not reached / Lively demand results in the first bottlenecks / Recycling companies near to their capacity limits
21.03.2017
POLYMER PRICES
Engineering Recyclate February 2017: Increases on the primary market begin to impact secondary products / Response with PA and PC/ABS blends / Adequate supply, demand and capacity utilisation / Base material likely to become more expensive in March
20.02.2017
POLYMER PRICES
Engineering Recyclate January 2017: Little movement in January / Reasonable ordering activity with availability normal / Price rises likely in February on a broad front / ABS will be affected most
20.01.2017
POLYMER PRICES
Engineering Recyclate December 2016: Secondary materials unchanged at year's end / Demand significantly weaker / Flood of orders for Q1 / Price hikes likely for some grades in new year
22.12.2016
POLYMER PRICES
Engineering Recyclate November 2016: Notations mostly stable / Uptrend likely / With year-end approaching, demand takes another dip / Abundance of scrap material
21.11.2016
POLYMER PRICES
Engineering Recyclate October 2016: Notations predominantly stable / Individual peaks for rPA and rPOM are capped / Demand below expectations / Little effect felt from producers' calls for hikes on the primary market
21.10.2016
POLYMER PRICES
Engineering Recyclate September 2016: Most prices continue to crumble / Primary market developments put recyclers under pressure / Demand subdued even after end to the holidays
23.09.2016
POLYMER PRICES
Standard Recyclate September 2016: Notations decline slightly across the board / rPP and rPS resist downtrend / Demand at times below expectations / Stability expected in October
22.09.2016
POLYMER PRICES
Engineering Recyclate August 2016: Virgin material surplus rings in landslide in secondary market notations / Polyamides and polycarbonate strongest affected / Despite signs of stabilisation, minor tremors still possible
22.08.2016
POLYMER PRICES
Engineering Recyclate July 2016: Notations unchanged apart from rABS and rPP compounds / Other materials reflect primary market's stability / Few changes expected in August
21.07.2016
POLYMER PRICES
Engineering Recyclate June 2016: Higher feedstock notations have little effect on recyclate prices / Small upward corrections for rABS, rPA 6 and rPC / Market jitters about future indexing of PP
20.06.2016
POLYMER PRICES
Engineering Recyclate May 2016: General uptrend increasingly impacts secondary market / Threat of widespread hikes / Only exception is rPOM
20.05.2016
Seite 2 von 5
Topic search
Plastics Information Europe
  • Polymer Prices (4.432)
    • Petrochemicals (217)
    • Standard Thermoplastics (638)
    • PET (186)
    • Engineering Thermoplastics (191)
    • Recyclate (245)
      • Standard Thermoplastics / Recyclate (122)
      • Engineering Thermoplastics / Recyclate (123)
    • Polyurethanes (185)
    • High Performance Polymers (2)
    • Composites (121)
    • Announcements (2.208)
    • World Regions (377)
      • China (170)
        • Standard Thermoplastics (86)
        • Engineering Thermoplastics (84)
      • North America (106)
      • Russia (101)
    • Spot Prices (62)
  • Companies (23.892)
    • Polymer Materials (11.744)
      • Petrochemicals (2.071)
      • Charge (1.426)
        • General (65)
        • Masterbatches (276)
        • Additives (578)
        • Colours (280)
        • Reinforcements/Fillers (227)
      • Polymers (7.360)
        • General (404)
        • Standard Thermoplastics (2.636)
          • General (89)
          • Polyolefins (1.294)
          • Polystyrenes (218)
          • PVC (494)
          • Polyester (394)
          • Expandable (PS, PP, PE) (147)
        • Technical Thermoplastics (2.187)
          • General (293)
          • Styrene Copolymers (167)
          • PC/PMMA (284)
          • Polyamides (570)
          • POM/PBT/PP (197)
          • Technical Compounds (676)
        • PUR (534)
        • Other (1.599)
          • General (78)
          • Composites/Thermosets (326)
          • High Performance (413)
          • Biopolymers (483)
          • Elastomers/TPE (251)
          • Rezyklate (48)
      • Distribution (887)
    • Machinery (948)
      • General (20)
      • Plant Construction (105)
      • Core Machines (660)
        • General (75)
        • Extrusion (159)
        • Injection Moulding (331)
        • Blow Moulding (65)
        • Foam (10)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (159)
        • General (27)
        • Control Systems (4)
        • Automatisation (29)
        • Dies/Tools/Moulds (86)
        • Components (13)
      • Finishing (4)
    • Processing (5.403)
      • General (674)
      • Extrusion (1.772)
        • General (83)
        • Flexible Films (829)
        • Rigid Films/Sheet (298)
        • Pipes (277)
        • Profiles/Rods (213)
        • Other (72)
      • Injection Moulding (1.298)
      • Blow Moulding (385)
      • PUR (210)
      • Other (872)
        • General (95)
        • Foam (233)
        • Composites/Thermosets (293)
        • Thermoforming (163)
        • Rotational Moulding (26)
        • Additive Manufacturing (62)
      • Finishing (192)
    • Application (5.058)
      • General (89)
      • Packaging (2.088)
      • Construction (523)
      • Automotive / Transport (1.245)
      • Electrical Appliances (260)
      • Consumer Goods (417)
      • Medical (294)
      • Technical (142)
    • Other (739)
      • Recycling/Disposal (580)
      • Services (159)
  • Commercial Register (70)
    • Insolvency (65)
    • Changes (5)
  • Markets (15.228)
    • Polymer Materials (6.570)
      • Petrochemicals (1.551)
      • Charge (661)
        • General (32)
        • Masterbatches (77)
        • Additives (249)
        • Colours (111)
        • Reinforcements/Fillers (192)
      • Polymers (4.154)
        • General (329)
        • Standard Thermoplastics (1.749)
          • General (47)
          • Polyolefins (861)
          • Polystyrenes (108)
          • PVC (367)
          • Polyester (253)
          • Expandable (PS, PP, PE) (113)
        • Technical Thermoplastics (847)
          • General (74)
          • Styrene Copolymers (58)
          • PC/PMMA (107)
          • Polyamides (288)
          • POM/PBT/PP (67)
          • Technical Compounds (253)
        • PUR (316)
        • Other (913)
          • General (31)
          • Composites/Thermosets (233)
          • High Performance (227)
          • Biopolymers (296)
          • Elastomers/TPE (99)
          • Recyclate (27)
      • Other Materials (12)
      • Distribution (192)
    • Machinery (439)
      • General (110)
      • Plant Construction (12)
      • Core Machines (249)
        • General (88)
        • Extrusion (32)
        • Injection Moulding (108)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (68)
        • General (21)
        • Automatisation (14)
        • Dies/Tools/Moulds (33)
    • Processing (1.345)
      • General (289)
      • Extrusion (496)
        • General (18)
        • Flexible Films (234)
        • Rigid Films/Sheets (96)
        • Pipes (64)
        • Profiles/Rods (77)
        • Other (7)
      • Injection Moulding (171)
      • Blow Moulding (37)
      • PUR (60)
      • Other (250)
        • General (18)
        • Foam (55)
        • Composites/Thermosets (129)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (20)
      • Finishing (42)
    • Applications (2.510)
      • General (20)
      • Packaging (1.065)
      • Construction (219)
      • Automotive / Transport (695)
      • Electrical Appliances (172)
      • Consumer Goods (135)
      • Medical (139)
      • Technical (40)
      • Other (25)
    • Regions and Countries (3.507)
      • World (170)
      • German-speaking Countries (392)
      • Europe (1.703)
        • General (383)
        • Italy (129)
        • France (151)
        • Spain/Portugal (76)
        • Great Britain/Ireland (455)
        • Low Countries (73)
        • Central Europe (166)
        • Scandinavia (41)
        • Russia (83)
        • Eastern Europe (37)
        • Southeastern Europe (109)
      • North America (403)
      • Asia (594)
        • General (104)
        • China (343)
        • Japan (47)
        • Korea (24)
        • India (76)
      • Middle East (135)
      • Other (34)
      • South America (76)
    • Other (857)
      • Recycling/Disposal (766)
      • Economic Trend (58)
      • Services (29)
      • Logistics (4)
  • Production and Engineering (2.558)
    • Polymer Materials (1.654)
      • Petrochemicals (26)
      • Charge (338)
        • General (12)
        • Masterbatches (77)
        • Additives (175)
        • Colours (39)
        • Reinforcements/Fillers (35)
      • Polymers (1.265)
        • General (15)
        • Standard Themoplastics (245)
        • Technical Thermoplastics (474)
          • General (17)
          • Styrene Copolymers (45)
          • PC/PMMA (48)
          • Polyamides (161)
          • POM/PBT/PP (52)
          • Technical Compounds (151)
        • PUR (54)
        • Other (477)
          • General (17)
          • Composites/Thermosets (93)
          • High Performance (122)
          • Biopolymers (154)
          • Elastomers/TPE (88)
          • Recyclate (3)
      • Other (25)
    • Machinery (86)
      • Extrusion (19)
        • General (8)
        • Flexible Films (4)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (26)
    • Research (250)
      • Polymer Materials (89)
      • Technical (10)
      • Product Development (27)
      • Process (57)
      • Application (49)
      • Patents (2)
        • Polymer Materials (1)
        • Process (1)
      • Other (16)
    • New Products (543)
      • Packaging (337)
      • Construction (26)
      • Automotive / Transport (71)
      • Electrical Appliances (21)
      • Consumer Goods (31)
      • Medical (27)
      • Technical (7)
      • Other (23)
    • Other (25)
  • Management (161)
    • Purchasing (23)
    • General Management (49)
    • Company organisation (37)
    • Marketing/Sales (8)
    • Human Resources (3)
    • Finances (35)
    • Logistics (6)
  • People (1.244)
  • Industry (2.934)
    • General (674)
    • Associations/Institutions (1.242)
    • Legislation (645)
    • Environment / Health (363)
    • plas.TV - Plastics unite(d) (10)
  • Events (972)
  • Plastic Fantastic (354)
  • Commentaries (51)
  • Interviews (61)
  • Notes by Publisher (28)
© 2020 by Plastics Information Europe, Bad Homburg
Date of print: 29/05/2020
Ref: h5wfcsf4vz1zjr55qsupxhfo
KIVBHI
All rights reserved.
Access und use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/Default.aspx?pageid=302&referrer=article&node=100074&page=2