Show topic list

PIE Service Annual Reports

HUHTAMAKI 2007 full year result revised downwards / Profits to remain around level of 2006	30.10.2007
FORBO Strong economy helps lift H1 profits by 33% / Demand for linoleum flooring	19.09.2007
BRITISH POLYTHENE INDUSTRIES Small decline in profits and turnover / Bad summer weather is boosting demand for silage stretchwrap	13.09.2007
LANXESS “Lustran” deal leads to net loss in Q2 / Operating side improves / “Beautiful” semi-crystalline polymers	20.08.2007
BAYER MATERIALSCIENCE Higher volumes boost sales by 3% / Energy and raw materials increases bite into profits	14.08.2007
HELESI Profits up 59% / Dividend payments to start in 2007 / Investment programme on schedule	26.04.2007
DEGUSSA Earnings improvement for Specialty Materials / Expansion of global market position in acrylics	23.04.2007
PACTIV Prairie Packaging acquired for USD 1 bn / Tableware producer with sales of USD 500m	20.04.2007
EASTMAN Annual report published for 2006	20.04.2007
GRAMMER Eastern European presence to be intensified / New plant in Serbia / Decision soon on sale of bus seat unit	13.04.2007
GURIT EBIT soars 174% to CHF 27.5m / Margins limited by realignment / Wind energy leads	13.04.2007
QUADRANT Annual report published for 2006	12.04.2007
ELRINGKLINGER Expansion of plastics technology / Dependence on automobile industry to be reduced	11.04.2007
PETKIM Fresh attempt to privatise Turkish petrochemical producer / Market share continues to decline	03.04.2007
RESILUX Net loss again in 2006 despite higher turnover / Cautious optimism for 2007	03.04.2007
FORBO Improvements across the board lift profits by 35%	28.03.2007
NOVA / INEOS Styrenics joint venture expanded to North America / Number two player in resins / Capacity cutbacks	27.03.2007
TESSENDERLO Net loss in 2006 due to restructuring / Pipe and profiles perform well / Compounds weak	27.03.2007
PERLOS Annual report published for 2006	26.03.2007
LANXESS Decision on styrenics this year / Asian partnership sought / Polymer margins improve in 2006	22.03.2007
BERRY PLASTICS Merger with Covalence agreed / Combined company will have turnover of over USD 3 bn	22.03.2007
BASELL Tight European market brings record earnings / North American unit suffers second poor year	21.03.2007
SIG Rank expected to make higher bid / Ferd has no plans to up the ante / Sales, earnings growth in 2006	20.03.2007
BASF Annual report published for 2006	20.03.2007
BAYER MATERIALSCIENCE Earnings down slightly in 2006 / Start-up costs for China and plant outages / Higher volumes	19.03.2007

Seite 4 von 5

Topic search

Plastics Information Europe

Polymer Prices (6.327)
- Petrochemicals (561)
- Standard Thermoplastics (1.016)
- PET (258)
- Engineering Thermoplastics (265)
- Recyclate (393)
  - General (6)
  - Standard Thermoplastics / Recyclate (193)
  - Engineering Thermoplastics / Recyclate (194)
- Polyurethanes (258)
- High Performance Polymers (2)
- Composites (191)
- Announcements (2.616)
- World Regions (611)
  - China (310)
    - Standard Thermoplastics (156)
    - Engineering Thermoplastics (154)
  - North America (177)
  - Russia (124)
- Spot Prices (134)
- Forecasts (22)
Companies (36.046)
- Polymer Materials (17.745)
  - Petrochemicals (3.219)
  - Charge (1.910)
    - General (99)
    - Masterbatches (342)
    - Additives (805)
    - Colours (391)
    - Reinforcements/Fillers (273)
  - Polymers (11.420)
    - General (738)
    - Standard Thermoplastics (3.960)
      - General (113)
      - Polyolefins (2.015)
      - Polystyrenes (354)
      - PVC (694)
      - Polyester (578)
      - Expandable (PS, PP, PE) (206)
    - Technical Thermoplastics (3.352)
      - General (352)
      - Styrene Copolymers (269)
      - PC/PMMA (474)
      - Polyamides (948)
      - POM/PBT/PP (326)
      - Technical Compounds (983)
    - PUR (810)
    - Other (2.560)
      - General (105)
      - Composites/Thermosets (414)
      - High Performance (639)
      - Biopolymers (713)
      - Elastomers/TPE (382)
      - Recyclate (307)
  - Distribution (1.196)
- Machinery (1.124)
  - General (31)
  - Plant Construction (144)
  - Core Machines (761)
    - General (92)
    - Extrusion (182)
    - Injection Moulding (382)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (183)
    - General (33)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (99)
    - Components (13)
  - Finishing (5)
- Processing (7.397)
  - General (925)
  - Extrusion (2.417)
    - General (128)
    - Flexible Films (1.171)
    - Rigid Films/Sheet (391)
    - Pipes (357)
    - Profiles/Rods (263)
    - Other (107)
  - Injection Moulding (1.792)
  - Blow Moulding (529)
  - PUR (329)
  - Other (1.159)
    - General (128)
    - Foam (316)
    - Composites/Thermosets (357)
    - Thermoforming (228)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (246)
- Application (7.614)
  - General (135)
  - Packaging (3.292)
  - Construction (752)
  - Automotive / Transport (1.743)
  - Electrical Appliances (354)
  - Consumer Goods (702)
  - Medical (412)
  - Technical (224)
- Other (2.166)
  - Recycling/Disposal (1.734)
  - Services (260)
  - Logistics (172)
Commercial Register (160)
- Insolvency (155)
- Changes (5)
Markets (24.536)
- Polymer Materials (10.589)
  - Petrochemicals (2.605)
  - Charge (881)
    - General (39)
    - Masterbatches (98)
    - Additives (349)
    - Colours (162)
    - Reinforcements/Fillers (233)
  - Polymers (6.701)
    - General (860)
    - Standard Thermoplastics (2.529)
      - General (74)
      - Polyolefins (1.266)
      - Polystyrenes (165)
      - PVC (519)
      - Polyester (362)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.345)
      - General (89)
      - Styrene Copolymers (114)
      - PC/PMMA (161)
      - Polyamides (471)
      - POM/PBT/PP (114)
      - Technical Compounds (396)
    - PUR (477)
    - Other (1.490)
      - General (47)
      - Composites/Thermosets (301)
      - High Performance (313)
      - Biopolymers (440)
      - Elastomers/TPE (147)
      - Recyclate (242)
  - Other Materials (61)
  - Distribution (341)
- Machinery (524)
  - General (131)
  - Plant Construction (14)
  - Core Machines (307)
    - General (117)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.749)
  - General (459)
  - Extrusion (628)
    - General (20)
    - Flexible Films (305)
    - Rigid Films/Sheets (126)
    - Pipes (75)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (181)
  - Blow Moulding (43)
  - PUR (84)
  - Other (309)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.327)
  - General (51)
  - Packaging (2.093)
  - Construction (338)
  - Automotive / Transport (1.012)
  - Electrical Appliances (230)
  - Consumer Goods (274)
  - Medical (213)
  - Technical (62)
  - Other (54)
- Regions and Countries (4.191)
  - World (196)
  - German-speaking Countries (498)
  - Europe (2.047)
    - General (505)
    - Italy (145)
    - France (155)
    - Spain/Portugal (105)
    - Great Britain/Ireland (521)
    - Low Countries (75)
    - Central Europe (180)
    - Scandinavia (46)
    - Russia (115)
    - Eastern Europe (57)
    - Southeastern Europe (143)
  - North America (498)
  - Asia (682)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (148)
  - Other (40)
  - South America (82)
- Other (3.156)
  - Recycling/Disposal (2.244)
  - Economic Trend (517)
  - Services (41)
  - Logistics (272)
  - Energy (82)
Production and Engineering (3.842)
- Polymer Materials (2.394)
  - Petrochemicals (63)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.855)
    - General (31)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (74)
    - Other (775)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (161)
      - Biopolymers (252)
      - Elastomers/TPE (115)
      - Recyclate (116)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (443)
  - Polymer Materials (145)
  - Technical (16)
  - Product Development (42)
  - Process (83)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (871)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (39)
Management (797)
- Purchasing (108)
- General Management (190)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (100)
- Logistics (331)
People (1.514)
Industry (6.558)
- General (1.273)
- Associations/Institutions (2.497)
- Legislation (1.453)
- Environment / Health (1.325)
- plas.TV - Plastics unite(d) (10)
Events (1.173)
Plastic Fantastic (575)
Commentaries (85)
Interviews (159)
Notes by Publisher (79)