Show topic list

Production and Engineering Research Process

PROCTER & GAMBLE Company remains quiet but moves ahead with plans to enter injection moulding arena / Subsidiary Imflux busy hiring engineers with plastics experience	30.10.2013
COMPOSITES French consortium surrounding Cetim starts producing CFR suspension for automotive use / Less than two minutes of cycle time	03.04.2013
MONOSOL Launching edible, water-soluble packaging films / Convenient, pre-portioned pouches / Food service benefits	13.09.2012
RESEARCH Scientists develop process to turn waste bread into succinic acid / Conversion rate reported to be higher than alternative materials, including corn	28.08.2012
BASF Cooperating with Novozymes and Cargill on bio-based acrylic acid / Dextrose as feedstock	21.08.2012
UK COMPOSITES MARKET Automotive partnership: Consortium to develop lightweight, lower-cost, composite vehicle structures / Key roles for robotics and fast-cure prepregs	21.06.2012
MECAPLAST Moulding technology and lightweight fillers could lead to auto component weight reduction of up to 50% / French government-funded project to develop process	19.06.2012
AMCOR RIGID PLASTICS Collaboration with Sacmi on development of compression blow forming / First applications in pharmaceuticals packaging / HDPE bottles in production at US site / Food uses envisaged	04.05.2012
PLASMA ETCHING Anti-reflective films incorporate surface nanostructures / New technology is based on the “moth eye” principle / Continuous process for anti-reflecting polymers	02.05.2012
NATIONAL COMPOSITES CENTRE Formal opening of focal point for UK composites development / Key resource, says GKN Aerospace / 8% annual market growth forecast	30.11.2011
BAYER MATERIALSCIENCE Technology for incorporating fillers into reactive PU blends / New perspectives for composites	14.03.2011
FRAUNHOFER German researcher develops PLA composites with staple fibre reinforcement / Potential applications in medical technology and automotive	24.01.2011
RESEARCH Impregnating plastics with carbon dioxide / Research project at Germany's Fraunhofer UMSICHT / Nanoparticles give polycarbonate antibacterial properties	14.01.2011
BAYER MATERIALSCIENCE Development of materials for printed electronics sector	23.09.2010
RESEARCH German scientists develop new recycling technique for fluoropolymers / Striving for pilot plant	19.08.2010
RESEARCH Positive interim assessment for EU-funded project to replace synthetic polymer layers by whey protein isolate coating / Plans to reproduce test results at pilot lab	26.07.2010
BIOPLASTICS German institute develops new technique for foamed moulded parts	21.07.2010
FRANCE Plastipolis cluster receives funding for 10 new projects	09.11.2009
RESEARCH Banana by-products used in plastics production / UK university develops rotational moulding technique	09.10.2009
SULZER CHEMTECH Process for continuous production of EPS from PS / Improved dispersion / Large-scale plant under construction	11.05.2009
UHDE INVENTA-FISCHER "Flakes-To-Resin" process receives FDA blessing	20.08.2007
POLYCELL Injection moulded PE foams come to Europe	23.02.2007
BALDA Cooperation with Singulus / Automated system for moulding and metallic finishing	31.01.2007
BOROUGE / BOREALIS New automotive thermoplastics	08.12.2006
AUTOMOTIVE PLASTICS EUR 6m funding for "Pegasus" SME project / Some 40,000 new jobs for SMEs targeted	08.11.2006

Seite 3 von 4

Topic search

Plastics Information Europe

Polymer Prices (5.855)
- Petrochemicals (430)
- Standard Thermoplastics (924)
- PET (242)
- Engineering Thermoplastics (247)
- Recyclate (353)
  - Standard Thermoplastics / Recyclate (176)
  - Engineering Thermoplastics / Recyclate (177)
- Polyurethanes (239)
- High Performance Polymers (2)
- Composites (175)
- Announcements (2.559)
- World Regions (562)
  - China (278)
    - Standard Thermoplastics (140)
    - Engineering Thermoplastics (138)
  - North America (160)
  - Russia (124)
- Spot Prices (118)
- Forecasts (4)
Companies (33.282)
- Polymer Materials (16.497)
  - Petrochemicals (2.962)
  - Charge (1.800)
    - General (89)
    - Masterbatches (332)
    - Additives (751)
    - Colours (367)
    - Reinforcements/Fillers (261)
  - Polymers (10.601)
    - General (673)
    - Standard Thermoplastics (3.672)
      - General (113)
      - Polyolefins (1.862)
      - Polystyrenes (323)
      - PVC (643)
      - Polyester (544)
      - Expandable (PS, PP, PE) (187)
    - Technical Thermoplastics (3.131)
      - General (348)
      - Styrene Copolymers (251)
      - PC/PMMA (442)
      - Polyamides (862)
      - POM/PBT/PP (305)
      - Technical Compounds (923)
    - PUR (765)
    - Other (2.360)
      - General (100)
      - Composites/Thermosets (399)
      - High Performance (589)
      - Biopolymers (681)
      - Elastomers/TPE (357)
      - Recyclate (234)
  - Distribution (1.134)
- Machinery (1.065)
  - General (27)
  - Plant Construction (130)
  - Core Machines (731)
    - General (88)
    - Extrusion (176)
    - Injection Moulding (364)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (173)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (92)
    - Components (13)
  - Finishing (4)
- Processing (6.868)
  - General (858)
  - Extrusion (2.264)
    - General (112)
    - Flexible Films (1.092)
    - Rigid Films/Sheet (368)
    - Pipes (340)
    - Profiles/Rods (255)
    - Other (97)
  - Injection Moulding (1.648)
  - Blow Moulding (492)
  - PUR (287)
  - Other (1.086)
    - General (114)
    - Foam (302)
    - Composites/Thermosets (336)
    - Thermoforming (209)
    - Rotational Moulding (31)
    - Additive Manufacturing (94)
  - Finishing (233)
- Application (7.036)
  - General (125)
  - Packaging (3.037)
  - Construction (697)
  - Automotive / Transport (1.615)
  - Electrical Appliances (326)
  - Consumer Goods (653)
  - Medical (379)
  - Technical (204)
- Other (1.816)
  - Recycling/Disposal (1.467)
  - Services (248)
  - Logistics (101)
Commercial Register (111)
- Insolvency (106)
- Changes (5)
Markets (22.275)
- Polymer Materials (9.661)
  - Petrochemicals (2.350)
  - Charge (834)
    - General (38)
    - Masterbatches (90)
    - Additives (331)
    - Colours (153)
    - Reinforcements/Fillers (222)
  - Polymers (6.111)
    - General (721)
    - Standard Thermoplastics (2.349)
      - General (74)
      - Polyolefins (1.162)
      - Polystyrenes (154)
      - PVC (487)
      - Polyester (337)
      - Expandable (PS, PP, PE) (135)
    - Technical Thermoplastics (1.236)
      - General (87)
      - Styrene Copolymers (101)
      - PC/PMMA (146)
      - Polyamides (421)
      - POM/PBT/PP (106)
      - Technical Compounds (375)
    - PUR (444)
    - Other (1.361)
      - General (46)
      - Composites/Thermosets (287)
      - High Performance (293)
      - Biopolymers (421)
      - Elastomers/TPE (137)
      - Recyclate (177)
  - Other Materials (57)
  - Distribution (309)
- Machinery (501)
  - General (127)
  - Plant Construction (14)
  - Core Machines (289)
    - General (109)
    - Extrusion (36)
    - Injection Moulding (123)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.642)
  - General (405)
  - Extrusion (597)
    - General (20)
    - Flexible Films (291)
    - Rigid Films/Sheets (116)
    - Pipes (70)
    - Profiles/Rods (89)
    - Other (11)
  - Injection Moulding (177)
  - Blow Moulding (43)
  - PUR (77)
  - Other (299)
    - General (20)
    - Foam (77)
    - Composites/Thermosets (136)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (38)
  - Finishing (44)
- Applications (3.904)
  - General (37)
  - Packaging (1.882)
  - Construction (297)
  - Automotive / Transport (932)
  - Electrical Appliances (212)
  - Consumer Goods (243)
  - Medical (198)
  - Technical (56)
  - Other (47)
- Regions and Countries (4.017)
  - World (194)
  - German-speaking Countries (472)
  - Europe (1.944)
    - General (464)
    - Italy (142)
    - France (155)
    - Spain/Portugal (97)
    - Great Britain/Ireland (502)
    - Low Countries (74)
    - Central Europe (173)
    - Scandinavia (44)
    - Russia (107)
    - Eastern Europe (46)
    - Southeastern Europe (140)
  - North America (481)
  - Asia (667)
    - General (118)
    - China (389)
    - Japan (49)
    - Korea (26)
    - India (85)
  - Middle East (141)
  - Other (37)
  - South America (81)
- Other (2.550)
  - Recycling/Disposal (1.908)
  - Economic Trend (344)
  - Services (41)
  - Logistics (203)
  - Energy (54)
Production and Engineering (3.706)
- Polymer Materials (2.313)
  - Petrochemicals (55)
  - Charge (436)
    - General (14)
    - Masterbatches (111)
    - Additives (223)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.792)
    - General (30)
    - Standard Themoplastics (356)
    - Technical Thermoplastics (593)
      - General (19)
      - Styrene Copolymers (62)
      - PC/PMMA (62)
      - Polyamides (203)
      - POM/PBT/PP (67)
      - Technical Compounds (180)
    - PUR (71)
    - Other (742)
      - General (21)
      - Composites/Thermosets (107)
      - High Performance (159)
      - Biopolymers (240)
      - Elastomers/TPE (113)
      - Recyclate (102)
  - Other (30)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (422)
  - Polymer Materials (140)
  - Technical (13)
  - Product Development (40)
  - Process (81)
  - Application (89)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (55)
- New Products (839)
  - Packaging (549)
  - Construction (34)
  - Automotive / Transport (99)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (7)
  - Other (38)
- Other (38)
Management (637)
- Purchasing (100)
- General Management (137)
- Company organisation (43)
- Marketing/Sales (14)
- Human Resources (7)
- Finances (88)
- Logistics (248)
People (1.474)
Industry (5.743)
- General (1.136)
- Associations/Institutions (2.212)
- Legislation (1.212)
- Environment / Health (1.173)
- plas.TV - Plastics unite(d) (10)
Events (1.122)
Plastic Fantastic (522)
Commentaries (78)
Interviews (131)
Notes by Publisher (69)