Show topic list

Polymer Prices Recyclate Engineering Thermoplastics / Recyclate

POLYMER PRICES Engineering recyclate March 2012: Secondary ABS continues to rise / Upward tendencies for rPA and rPC / rPOM and rPP compounds stay put / Production scrap increasingly tight and expensive / Price rises imminent	19.03.2012
POLYMER PRICES Engineering recyclate February 2012: Anticipated primary market increases coupled with product shortages drive ABS and PA 6 recyclate up / Rollover dominates elsewhere / Supply and demand stable at a high level / Feedstocks continue to rise	20.02.2012
POLYMER PRICES Engineering recyclate January 2012: Prices roll over across the board / Stock replenishing measures drive demand / Automotive sector gets off to a strong start / Recyclers plan significant hikes	19.01.2012
POLYMER PRICES Engineering Recyclate December 2011: Stability prevails / rPOM follows primary material down slightly / rPP producers pass on cost reductions / Automotive suppliers begin end-of-year rallye / Rollover likely	19.12.2011
POLYMER PRICES Engineering Recyclate November 2011: Pressure from crumbling primary market impacts secondary sector / Prices for rABS, rPC and rPP-Copo compounds slip / Margins suffer as plastic scrap prices remain high / Recyclers will take a tough line on a rollover	21.11.2011
POLYMER PRICES Engineering Recyclate October 2011: End to the primary market's Q3 price cap causes recyclate notations to crumble / Double-digit falls abound / rPP compounds stable / Availability of plastic scrap improves / Declining orders / Stability possible	20.10.2011
POLYMER PRICES Engineering Recyclate September 2011: Virgin material's instability hits rPA, rPOM and rPC / Plastic scrap still tight and expensive / Demand for inexpensive recyclate remains strong / Suppliers intend to take hard line	20.09.2011
POLYMER PRICES Engineering Recyclate August 2011: Notations remain stable to firm / rPA and rPC/ABS blends still tight / Demand appears to be holding up well / rPP compounds may come under some degree of pressure	22.08.2011
POLYMER PRICES Engineering Recyclate July 2011: Secondary market remains resistant despite pressure from virgin material / rPA 6.6 and rPC see reductions / Higher primary cost also impacts production scrap / Situation likely to stabilise despite slack ordering	20.07.2011
POLYMER PRICES Engineering Recyclate June 2011: Stability pervades / Price rises for rPA 6 and rPC blends / Ultra-low rPOM prices brought into line / Production scrap remains short / Margins threatened by price hikes in primary sector	20.06.2011
POLYMER PRICES Engineering Recyclate May 2011: Range narrows with rPA, rPC and rPP / Availability of production scrap improves slightly / Demand still lively / No consensus on price hikes	20.05.2011
POLYMER PRICES Engineering Recyclate April 2011: Producers initially reluctant to pass on higher costs / Corrections only at the upper end of the scale / Shortage of plastic scrap / Supply of recyclate inadequate / Price increases planned after Easter	20.04.2011
POLYMER PRICES Engineering Recyclate March 2011: More price increases ahead as cost wave has secondary market in its grip / Virgin material tighter and more expensive / Booming demand / Strong risk of hikes remains	21.03.2011
POLYMER PRICES Engineering recyclate February 2011: rABS and rPA hit by primary polymer price surge / Explosion at top end of rPOM / Scrap ever tighter / Switch from virgin to recyclate / Suppliers seek hikes of 5-6% in March	16.02.2011
POLYMER PRICES Engineering recyclate January 2011: Momentum from primary market drives range upward / rABS and rPOM tight / Fresh FM limits rPA / Pipeline refilling and price surge for virgin polymer fuel demand	19.01.2011
POLYMER PRICES Engineering recyclate December 2010: Hikes on primary market leave regrind cold / Market battles pressure rPOM / Additives drive up rPC GF / Demand surprisingly strong / Shortages could fuel upswing	17.12.2010
POLYMER PRICES Engineering recyclate November 2010: Mostly stable / Price rises only at the upper end of the rABS and rPA 6 range / Supply of primary material improves / Demand continues lively / Risk of increase remains	18.11.2010
POLYMER PRICES Engineering recyclate October 2010: Dregs at the bottom of the market stirred up / Long-term low-priced contracts jacked up steeply / Material in the PIE range stable / Lively demand / K 2010 to point the way	20.10.2010
POLYMER PRICES Recyclate September 2010: Diverging movements in standard segment / Adequate supply meets normal demand / Trend in primary sector caps polyolefins / For engineering grades, the calm before the storm	20.09.2010
POLYMER PRICES Recyclate August 2010: Standard grades firm despite crumbling primary notations / Shortage of material drives rPA and rPC up steeply	19.08.2010
POLYMER PRICES Recyclate July 2010: Some standard grades point sharply upward / Low end of engineering plastics range lifted	20.07.2010
POLYMER PRICES Standard thermoplastic recyclate remains stable in June / Some prices decrease / Secondary engineering polymers still caught in upward spiral / Polyamide leads the price upswing	21.06.2010
POLYMER PRICES Recyclate prices continue their upward climb in May / Hikes for almost all products as market remains tight	21.05.2010
POLYMER PRICES Tightness of primary market spills over into secondary sector / Regrind prices rise for both standard and engineering grades / No relief likely in the short term	23.04.2010

Seite 8 von 8

Topic search

Plastics Information Europe

Polymer Prices (6.456)
- Petrochemicals (598)
- Standard Thermoplastics (1.040)
- PET (262)
- Engineering Thermoplastics (270)
- Recyclate (403)
  - General (6)
  - Standard Thermoplastics / Recyclate (198)
  - Engineering Thermoplastics / Recyclate (199)
- Polyurethanes (263)
- High Performance Polymers (2)
- Composites (196)
- Announcements (2.630)
- World Regions (626)
  - China (320)
    - Standard Thermoplastics (161)
    - Engineering Thermoplastics (159)
  - North America (182)
  - Russia (124)
- Spot Prices (139)
- Forecasts (27)
Companies (36.800)
- Polymer Materials (18.108)
  - Petrochemicals (3.291)
  - Charge (1.942)
    - General (100)
    - Masterbatches (344)
    - Additives (821)
    - Colours (401)
    - Reinforcements/Fillers (276)
  - Polymers (11.661)
    - General (751)
    - Standard Thermoplastics (4.051)
      - General (114)
      - Polyolefins (2.061)
      - Polystyrenes (364)
      - PVC (715)
      - Polyester (586)
      - Expandable (PS, PP, PE) (211)
    - Technical Thermoplastics (3.424)
      - General (353)
      - Styrene Copolymers (283)
      - PC/PMMA (487)
      - Polyamides (972)
      - POM/PBT/PP (336)
      - Technical Compounds (993)
    - PUR (824)
    - Other (2.611)
      - General (106)
      - Composites/Thermosets (418)
      - High Performance (656)
      - Biopolymers (722)
      - Elastomers/TPE (387)
      - Recyclate (322)
  - Distribution (1.214)
- Machinery (1.139)
  - General (33)
  - Plant Construction (147)
  - Core Machines (766)
    - General (92)
    - Extrusion (183)
    - Injection Moulding (386)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (187)
    - General (36)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (100)
    - Components (13)
  - Finishing (6)
- Processing (7.532)
  - General (943)
  - Extrusion (2.443)
    - General (131)
    - Flexible Films (1.184)
    - Rigid Films/Sheet (394)
    - Pipes (361)
    - Profiles/Rods (264)
    - Other (109)
  - Injection Moulding (1.835)
  - Blow Moulding (547)
  - PUR (340)
  - Other (1.174)
    - General (133)
    - Foam (317)
    - Composites/Thermosets (363)
    - Thermoforming (231)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (250)
- Application (7.747)
  - General (141)
  - Packaging (3.346)
  - Construction (759)
  - Automotive / Transport (1.782)
  - Electrical Appliances (358)
  - Consumer Goods (714)
  - Medical (420)
  - Technical (227)
- Other (2.274)
  - Recycling/Disposal (1.818)
  - Services (263)
  - Logistics (193)
Commercial Register (170)
- Insolvency (164)
- Changes (6)
Markets (25.156)
- Polymer Materials (10.841)
  - Petrochemicals (2.674)
  - Charge (892)
    - General (41)
    - Masterbatches (100)
    - Additives (350)
    - Colours (165)
    - Reinforcements/Fillers (236)
  - Polymers (6.863)
    - General (896)
    - Standard Thermoplastics (2.586)
      - General (75)
      - Polyolefins (1.292)
      - Polystyrenes (170)
      - PVC (535)
      - Polyester (371)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.379)
      - General (91)
      - Styrene Copolymers (122)
      - PC/PMMA (166)
      - Polyamides (481)
      - POM/PBT/PP (116)
      - Technical Compounds (403)
    - PUR (483)
    - Other (1.519)
      - General (48)
      - Composites/Thermosets (306)
      - High Performance (317)
      - Biopolymers (445)
      - Elastomers/TPE (150)
      - Recyclate (253)
  - Other Materials (61)
  - Distribution (351)
- Machinery (531)
  - General (134)
  - Plant Construction (15)
  - Core Machines (309)
    - General (119)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (73)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (35)
- Processing (1.778)
  - General (483)
  - Extrusion (630)
    - General (20)
    - Flexible Films (306)
    - Rigid Films/Sheets (126)
    - Pipes (76)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.447)
  - General (53)
  - Packaging (2.161)
  - Construction (350)
  - Automotive / Transport (1.034)
  - Electrical Appliances (233)
  - Consumer Goods (278)
  - Medical (215)
  - Technical (64)
  - Other (59)
- Regions and Countries (4.245)
  - World (197)
  - German-speaking Countries (504)
  - Europe (2.085)
    - General (514)
    - Italy (149)
    - France (157)
    - Spain/Portugal (106)
    - Great Britain/Ireland (531)
    - Low Countries (75)
    - Central Europe (183)
    - Scandinavia (48)
    - Russia (118)
    - Eastern Europe (61)
    - Southeastern Europe (143)
  - North America (501)
  - Asia (683)
    - General (123)
    - China (393)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (152)
  - Other (40)
  - South America (83)
- Other (3.314)
  - Recycling/Disposal (2.338)
  - Economic Trend (554)
  - Services (41)
  - Logistics (294)
  - Energy (87)
Production and Engineering (3.864)
- Polymer Materials (2.406)
  - Petrochemicals (66)
  - Charge (446)
    - General (15)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.863)
    - General (32)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (76)
    - Other (780)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (162)
      - Biopolymers (254)
      - Elastomers/TPE (115)
      - Recyclate (118)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (447)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (43)
  - Process (84)
  - Application (96)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (876)
  - Packaging (576)
  - Construction (35)
  - Automotive / Transport (102)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (40)
Management (837)
- Purchasing (110)
- General Management (205)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (102)
- Logistics (352)
People (1.518)
Industry (6.761)
- General (1.306)
- Associations/Institutions (2.567)
- Legislation (1.521)
- Environment / Health (1.357)
- plas.TV - Plastics unite(d) (10)
Events (1.192)
Plastic Fantastic (586)
Commentaries (87)
Interviews (168)
Notes by Publisher (83)

More about

BASF Domo Caproleuna Ineos LyondellBasell Messe Düsseldorf Pinnacle Plastics Europe Porsche Consulting Repsol Rhodia Sabic TecPart Ticona TotalEnergies Volkswagen

Energy Cost Surcharges

Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team

Price survey methodology