Show topic list

Polymer Prices Recyclate Engineering Thermoplastics / Recyclate

POLYMER PRICES Engineering recyclate April 2020: Most recycled material suppliers take prices over into April / Processing comes to a standstill and restricts plastics scrap availability / Price cuts probable	20.04.2020
POLYMER PRICES Engineering recyclate March 2020: Reductions only for recycled polyamide 6.6 GF and polycarbonate / Supply plentiful / Wide-ranging price cuts expected in April / Fall in virgin material prices and coronavirus-related slump in demand	19.03.2020
POLYMER PRICES Engineering Recyclate February 2020: Recycled ABS, PA and PC see a few price cuts / Weak demand slows business considerably / Coronavirus delays mould supplies from China	19.02.2020
POLYMER PRICES Engineering Recyclate January 2020: Poor demand leads to rollovers everywhere / Prices may have bottomed out in many cases / PA 6.6 recyclate unlikely to escape reductions	21.01.2020
POLYMER PRICES Engineering Recyclate December 2019: Prices down for nearly all regrind types / Significantly weaker demand at year-end / Nevertheless surprisingly strong order-book situation for January and February	19.12.2019
POLYMER PRICES Engineering Recyclate November 2019: Notations unchanged with an uninspiring month / Demand picks up only slightly / Pressure from primary sector continues	20.11.2019
POLYMER PRICES Engineering Recyclate October 2019: Prices roll over / Demand very weak for the time of year / Many recyclate producers have their backs to the wall / Gap between primary and secondary PA is too small	18.10.2019
POLYMER PRICES Engineering Recyclate September 2019: First price cuts in mid-month / Order activity expected to remain slow in October / Price cuts likely to spread	19.09.2019
POLYMER PRICES Engineering Recyclate August 2019: Only a few minor price reductions / Rollover predicted across the board in September	20.08.2019
POLYMER PRICES Engineering Recyclate July 2019: Notations give way across the board / Only recycled polyamide 6.6 and certain rPOM and rPC grades escaping downtrend / Decline set to affect all materials in August	19.07.2019
POLYMER PRICES Engineering Recyclate June 2019: Minor corrections with ABS and polycarbonate / Sluggish demand in automotive segment / Overall demand for regrind material nevertheless good / Price cuts likely with PA and PP compounds	20.06.2019
POLYMER PRICES Engineering Recyclate May 2019: Secondary market quiet / Recycled PP compounds an exception / Demand improves slowly / Little change likely in June	20.05.2019
POLYMER PRICES Engineering Recyclate April 2019: Notations largely stabilise / Only occasional softening with rPA 6 and rPC / Little change expected in May	18.04.2019
POLYMER PRICES Engineering Recyclate March 2019: Weak volume calls from automotive industry depress prices / Some further discounts in April	20.03.2019
POLYMER PRICES Engineering Recyclate February 2019: Most prices roll over as expected / Little movement likely in March / Demand picking up / Reasonable supply of base material and situation easing with PA 6.6	20.02.2019
POLYMER PRICES Engineering Recyclate January 2019: Rollover for all types / Prices unlikely to move much until Q2 / Surprisingly strong automotive demand / Situation with base material eases	21.01.2019
POLYMER PRICES Engineering Recyclate December 2018: Significant reductions with some regrind types / PA 6.6 feedstocks still short and expensive / Demand far weaker than in previous years / Automotive segment continues tending weak	20.12.2018
POLYMER PRICES Engineering Recyclate November 2018: Weak demand from automotive industry erodes prices for rABS, rPC and rPP compounds / Primary market fuels strong rPA 6.6 increase / Demand remains below expectations	21.11.2018
POLYMER PRICES Engineering Recyclate October 2018: Rollovers dominate / Production largely running normally / Demand weakens / More movement expected next month	19.10.2018
POLYMER PRICES Engineering Recyclate September 2018: General rollover in September / Upcoming hikes for polyamides set to also push up recyclates / Strong production month expected	21.09.2018
POLYMER PRICES Engineering Recyclate August 2018: General uptrend loses momentum / Some notations slightly up, others take a breather / Holiday season puts damper on demand	21.08.2018
POLYMER PRICES Engineering Recyclate July 2018: Primary product increases roll through secondary market / Large hikes for rPA 6.6 and rPC / Brisk demand continues / Varying trends in August	19.07.2018
POLYMER PRICES Engineering Recyclate June 2018: Bottleneck for rPA 6.6 dogs market / Dramatic hikes / rPC consistently tight / Demand still lively / More increases sure to come in July	20.06.2018
POLYMER PRICES Engineering Recyclate May 2018: All is still calm / rPC tends upwards / Demand reasonable despite many bank holidays / Prices expected to rise especially for rPA types and rPC / Base polymer often tight	18.05.2018
POLYMER PRICES Engineering Recyclate April 2018: Little change this month / Upturn probable in coming weeks / Demand quite reasonable of late / Still minor delivery delays	20.04.2018

Seite 4 von 8

Topic search

Plastics Information Europe

Polymer Prices (6.417)
- Petrochemicals (587)
- Standard Thermoplastics (1.033)
- PET (261)
- Engineering Thermoplastics (269)
- Recyclate (399)
  - General (6)
  - Standard Thermoplastics / Recyclate (196)
  - Engineering Thermoplastics / Recyclate (197)
- Polyurethanes (261)
- High Performance Polymers (2)
- Composites (195)
- Announcements (2.628)
- World Regions (620)
  - China (316)
    - Standard Thermoplastics (159)
    - Engineering Thermoplastics (157)
  - North America (180)
  - Russia (124)
- Spot Prices (137)
- Forecasts (25)
Companies (36.522)
- Polymer Materials (17.981)
  - Petrochemicals (3.264)
  - Charge (1.937)
    - General (99)
    - Masterbatches (344)
    - Additives (818)
    - Colours (400)
    - Reinforcements/Fillers (276)
  - Polymers (11.572)
    - General (748)
    - Standard Thermoplastics (4.023)
      - General (114)
      - Polyolefins (2.044)
      - Polystyrenes (362)
      - PVC (709)
      - Polyester (584)
      - Expandable (PS, PP, PE) (210)
    - Technical Thermoplastics (3.392)
      - General (352)
      - Styrene Copolymers (276)
      - PC/PMMA (481)
      - Polyamides (963)
      - POM/PBT/PP (331)
      - Technical Compounds (989)
    - PUR (817)
    - Other (2.592)
      - General (105)
      - Composites/Thermosets (417)
      - High Performance (651)
      - Biopolymers (719)
      - Elastomers/TPE (385)
      - Recyclate (315)
  - Distribution (1.208)
- Machinery (1.131)
  - General (32)
  - Plant Construction (145)
  - Core Machines (764)
    - General (92)
    - Extrusion (183)
    - Injection Moulding (384)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (185)
    - General (34)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (100)
    - Components (13)
  - Finishing (5)
- Processing (7.484)
  - General (938)
  - Extrusion (2.429)
    - General (129)
    - Flexible Films (1.177)
    - Rigid Films/Sheet (391)
    - Pipes (360)
    - Profiles/Rods (264)
    - Other (108)
  - Injection Moulding (1.821)
  - Blow Moulding (541)
  - PUR (337)
  - Other (1.169)
    - General (132)
    - Foam (317)
    - Composites/Thermosets (360)
    - Thermoforming (230)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (249)
- Application (7.697)
  - General (141)
  - Packaging (3.319)
  - Construction (759)
  - Automotive / Transport (1.771)
  - Electrical Appliances (355)
  - Consumer Goods (710)
  - Medical (416)
  - Technical (226)
- Other (2.229)
  - Recycling/Disposal (1.781)
  - Services (262)
  - Logistics (186)
Commercial Register (169)
- Insolvency (163)
- Changes (6)
Markets (24.976)
- Polymer Materials (10.769)
  - Petrochemicals (2.654)
  - Charge (891)
    - General (40)
    - Masterbatches (100)
    - Additives (350)
    - Colours (165)
    - Reinforcements/Fillers (236)
  - Polymers (6.815)
    - General (883)
    - Standard Thermoplastics (2.573)
      - General (75)
      - Polyolefins (1.286)
      - Polystyrenes (169)
      - PVC (532)
      - Polyester (368)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.365)
      - General (90)
      - Styrene Copolymers (118)
      - PC/PMMA (163)
      - Polyamides (477)
      - POM/PBT/PP (116)
      - Technical Compounds (401)
    - PUR (481)
    - Other (1.513)
      - General (47)
      - Composites/Thermosets (304)
      - High Performance (316)
      - Biopolymers (445)
      - Elastomers/TPE (150)
      - Recyclate (251)
  - Other Materials (61)
  - Distribution (348)
- Machinery (531)
  - General (134)
  - Plant Construction (15)
  - Core Machines (309)
    - General (119)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (73)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (35)
- Processing (1.773)
  - General (479)
  - Extrusion (629)
    - General (20)
    - Flexible Films (305)
    - Rigid Films/Sheets (126)
    - Pipes (76)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.410)
  - General (52)
  - Packaging (2.137)
  - Construction (347)
  - Automotive / Transport (1.029)
  - Electrical Appliances (231)
  - Consumer Goods (278)
  - Medical (214)
  - Technical (64)
  - Other (58)
- Regions and Countries (4.228)
  - World (197)
  - German-speaking Countries (502)
  - Europe (2.074)
    - General (511)
    - Italy (148)
    - France (157)
    - Spain/Portugal (106)
    - Great Britain/Ireland (528)
    - Low Countries (75)
    - Central Europe (182)
    - Scandinavia (47)
    - Russia (116)
    - Eastern Europe (61)
    - Southeastern Europe (143)
  - North America (499)
  - Asia (683)
    - General (123)
    - China (393)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (150)
  - Other (40)
  - South America (83)
- Other (3.265)
  - Recycling/Disposal (2.307)
  - Economic Trend (544)
  - Services (41)
  - Logistics (287)
  - Energy (86)
Production and Engineering (3.852)
- Polymer Materials (2.401)
  - Petrochemicals (65)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.860)
    - General (32)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (75)
    - Other (778)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (162)
      - Biopolymers (253)
      - Elastomers/TPE (115)
      - Recyclate (117)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (445)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (42)
  - Process (84)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (871)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (40)
Management (828)
- Purchasing (109)
- General Management (204)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (102)
- Logistics (345)
People (1.515)
Industry (6.711)
- General (1.301)
- Associations/Institutions (2.551)
- Legislation (1.501)
- Environment / Health (1.348)
- plas.TV - Plastics unite(d) (10)
Events (1.192)
Plastic Fantastic (583)
Commentaries (86)
Interviews (165)
Notes by Publisher (83)

More about

BASF Domo Caproleuna Ineos LyondellBasell Messe Düsseldorf Pinnacle Plastics Europe Porsche Consulting Repsol Rhodia Sabic TecPart Ticona TotalEnergies Volkswagen

Energy Cost Surcharges

Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team

Price survey methodology