www.pieweb.com

Polymer Prices Recyclate Standard Thermoplastics / Recyclate

POLYMER PRICES
Standard Recyclate July 2015: Prices turn around / Most notations roll over / Slight increases only for rHDPE and rPET flakes / First erosions for rPS and rPET / Downtrend likely in August
21.07.2015
POLYMER PRICES
Standard Recyclate June 2015: Substantial increases for almost all grades / Wave of primary market hikes hits the secondary sector / Upward pressure will persist for the weeks to come
18.06.2015
POLYMER PRICES
Standard Recyclate May 2015: Again increases across the board / Primary price hikes begin to affect secondary market / Feedstock scarcer and more costly / Lively demand / Upward pressure on the horizon
20.05.2015
POLYMER PRICES
Standard Recyclate April 2015: Wave of primary price increases crashes into secondary market / Particularly steep rises for high-quality grades / Uptrend expected to continue
17.04.2015
POLYMER PRICES
Standard Recyclate March 2015: Reversal in virgin material notations stops recyclate price erosion / Elimination of low prices raises lower end of the price range / Demand picks up / Recyclers plan additional hikes
18.03.2015
POLYMER PRICES
Standard Recyclate February 2015: Primary market declines cut down peak rHDPE and rPP notations / Prices of all other regrind materials drop / Supply normal / Further downward potential for rPS
18.02.2015
POLYMER PRICES
Standard Recyclate January 2015: Virgin material declines pressure regrind notations / rPE still holding up relatively well / Early January marked by stock replenishing efforts / Additional erosion likely
20.01.2015
POLYMER PRICES
Standard Recyclate December 2014: Falling virgin material notations take regrind down, too / Only rPS and rHDPE able to resist the trend / Notations likely to continue to erode
17.12.2014
POLYMER PRICES
Standard Recyclate November 2014: Notations caught between high purchasing costs and declining virgin material prices / rPP and rPET continue to plummet / Prices likely to soften across a broad front in December
19.11.2014
POLYMER PRICES
Standard Recyclate October 2014: rPE film notations rise slightly / Declines for rPP / Primary market surge sends PET regrind and flake prices tumbling / Regrinders hope for stability in November
21.10.2014
POLYMER PRICES
Standard Recyclate September 2014: Declining virgin material prices cut highflying rPE notations down / Both rPP and rPS prices rise slightly / rPET in grasp of seasonal effects / Higher costs prompt calls for price hikes
18.09.2014
POLYMER PRICES
Standard Recyclate August 2014: Notations a mixed bag / Very few notations respond to the decline in the primary market / Some prices actually rise / Downward pressure building
20.08.2014
POLYMER PRICES
Standard Recyclate July 2014: Following virgin material rises, cost of clean regrind also up / HDPE pipe, PP and PET production scrap tight / Possibility of additional hikes
22.07.2014
POLYMER PRICES
Standard Recyclate June 2014: Notations for regrind based on sorted production scrap rise slightly following primary market increases / Simpler grades mostly stable / Uncertain situation in Iraq driving prices up
18.06.2014
POLYMER PRICES
Standard Recyclate May 2014: PE regrind prices stable but tending up / Moderate rises with rPP and rPS / Secondary PET affected by weak primary market / Trends likely to strengthen in the next few weeks
20.05.2014
POLYMER PRICES
Standard Recyclate April 2014: Most notations rise slightly / Order volume somewhat weaker than in preceding months / Producers plan to lift prices as construction and agricultural seasons get underway
16.04.2014
POLYMER PRICES
Standard Recyclate March 2014: Declining virgin material prices prevent costs from being passed on / Orders from the construction sector remain solid / rPET demand restrained / Recyclers plan significant hikes in the new quarter
19.03.2014
POLYMER PRICES
Standard Recyclate February 2014: Many grades rising / Construction-related activities drive demand / Extended delivery times / Building materials continue pointing up / Packaging applications under pressure
18.02.2014
POLYMER PRICES
Standard Recyclate January 2014: Notations increase slightly / Rising virgin material prices pressure / Regrinders face increase in costs / Additional hikes likely / New rPET prices
21.01.2014
POLYMER PRICES
Standard Recyclate December 2013: Unusually solid order activity stabilises secondary markets / Firming primary market prices drive rising demand for regrind / Risk of hikes come January
16.12.2013
POLYMER PRICES
Standard Recyclate November 2013: Notations mostly stable / Slight declines for coloured film / Expensive scrap material / Solid demand / Firming primary market proves stabilising for regrind prices
20.11.2013
POLYMER PRICES
Standard Recyclate October 2013: Producers manage only occasional hikes / Downward trend in primary market puts an end to plans to raise scrap prices / Sideway movement for prices
18.10.2013
POLYMER PRICES
Standard Recyclate September 2013: Latest round of price hikes on the primary market has little effect / Price gap to virgin material widens / Demand fuelled by lively construction pick up and end of summer holidays / Primary prices about to fall?
20.09.2013
POLYMER PRICES
Standard Recyclate August 2013: Third round of primary material price hikes continues to have little impact on secondary market / Only occasional increases / Tight primary segment stimulates demand for regrind material / Substantial price hikes targeted
20.08.2013
POLYMER PRICES
Standard Recyclate July 2013: Secondary market untouched by increases in primary segment / Only slight gains registered / Producer margins dramatically weak / Plans to leverage virgin hikes
18.07.2013
Seite 6 von 8
Topic search
Plastics Information Europe
  • Polymer Prices (6.182)
    • Petrochemicals (525)
    • Standard Thermoplastics (989)
    • PET (253)
    • Engineering Thermoplastics (260)
    • Recyclate (384)
      • General (5)
      • Standard Thermoplastics / Recyclate (189)
      • Engineering Thermoplastics / Recyclate (190)
    • Polyurethanes (253)
    • High Performance Polymers (2)
    • Composites (187)
    • Announcements (2.583)
    • World Regions (598)
      • China (302)
        • Standard Thermoplastics (152)
        • Engineering Thermoplastics (150)
      • North America (172)
      • Russia (124)
    • Spot Prices (130)
    • Forecasts (18)
  • Companies (35.422)
    • Polymer Materials (17.453)
      • Petrochemicals (3.155)
      • Charge (1.885)
        • General (92)
        • Masterbatches (342)
        • Additives (793)
        • Colours (387)
        • Reinforcements/Fillers (271)
      • Polymers (11.227)
        • General (724)
        • Standard Thermoplastics (3.890)
          • General (113)
          • Polyolefins (1.979)
          • Polystyrenes (348)
          • PVC (679)
          • Polyester (568)
          • Expandable (PS, PP, PE) (203)
        • Technical Thermoplastics (3.303)
          • General (350)
          • Styrene Copolymers (263)
          • PC/PMMA (470)
          • Polyamides (926)
          • POM/PBT/PP (321)
          • Technical Compounds (973)
        • PUR (800)
        • Other (2.510)
          • General (102)
          • Composites/Thermosets (413)
          • High Performance (628)
          • Biopolymers (707)
          • Elastomers/TPE (375)
          • Recyclate (285)
      • Distribution (1.186)
    • Machinery (1.113)
      • General (29)
      • Plant Construction (143)
      • Core Machines (755)
        • General (91)
        • Extrusion (181)
        • Injection Moulding (379)
        • Blow Moulding (72)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (181)
        • General (32)
        • Control Systems (4)
        • Automatisation (34)
        • Dies/Tools/Moulds (98)
        • Components (13)
      • Finishing (5)
    • Processing (7.280)
      • General (909)
      • Extrusion (2.379)
        • General (125)
        • Flexible Films (1.149)
        • Rigid Films/Sheet (385)
        • Pipes (353)
        • Profiles/Rods (260)
        • Other (107)
      • Injection Moulding (1.767)
      • Blow Moulding (521)
      • PUR (320)
      • Other (1.143)
        • General (124)
        • Foam (312)
        • Composites/Thermosets (355)
        • Thermoforming (223)
        • Rotational Moulding (32)
        • Additive Manufacturing (97)
      • Finishing (241)
    • Application (7.491)
      • General (131)
      • Packaging (3.232)
      • Construction (740)
      • Automotive / Transport (1.717)
      • Electrical Appliances (350)
      • Consumer Goods (696)
      • Medical (405)
      • Technical (220)
    • Other (2.085)
      • Recycling/Disposal (1.673)
      • Services (257)
      • Logistics (155)
  • Commercial Register (145)
    • Insolvency (140)
    • Changes (5)
  • Markets (24.012)
    • Polymer Materials (10.367)
      • Petrochemicals (2.545)
      • Charge (872)
        • General (38)
        • Masterbatches (97)
        • Additives (345)
        • Colours (161)
        • Reinforcements/Fillers (231)
      • Polymers (6.553)
        • General (830)
        • Standard Thermoplastics (2.483)
          • General (74)
          • Polyolefins (1.242)
          • Polystyrenes (162)
          • PVC (508)
          • Polyester (356)
          • Expandable (PS, PP, PE) (141)
        • Technical Thermoplastics (1.315)
          • General (88)
          • Styrene Copolymers (108)
          • PC/PMMA (159)
          • Polyamides (455)
          • POM/PBT/PP (112)
          • Technical Compounds (393)
        • PUR (471)
        • Other (1.454)
          • General (47)
          • Composites/Thermosets (299)
          • High Performance (309)
          • Biopolymers (435)
          • Elastomers/TPE (143)
          • Recyclate (221)
      • Other Materials (60)
      • Distribution (337)
    • Machinery (521)
      • General (130)
      • Plant Construction (14)
      • Core Machines (305)
        • General (115)
        • Extrusion (37)
        • Injection Moulding (131)
        • Blow Moulding (15)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (72)
        • General (21)
        • Automatisation (17)
        • Dies/Tools/Moulds (34)
    • Processing (1.727)
      • General (446)
      • Extrusion (623)
        • General (20)
        • Flexible Films (302)
        • Rigid Films/Sheets (126)
        • Pipes (74)
        • Profiles/Rods (90)
        • Other (11)
      • Injection Moulding (181)
      • Blow Moulding (43)
      • PUR (82)
      • Other (307)
        • General (20)
        • Foam (80)
        • Composites/Thermosets (140)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (39)
      • Finishing (45)
    • Applications (4.230)
      • General (47)
      • Packaging (2.048)
      • Construction (325)
      • Automotive / Transport (994)
      • Electrical Appliances (226)
      • Consumer Goods (266)
      • Medical (210)
      • Technical (61)
      • Other (53)
    • Regions and Countries (4.148)
      • World (195)
      • German-speaking Countries (491)
      • Europe (2.020)
        • General (491)
        • Italy (145)
        • France (155)
        • Spain/Portugal (104)
        • Great Britain/Ireland (515)
        • Low Countries (75)
        • Central Europe (179)
        • Scandinavia (46)
        • Russia (113)
        • Eastern Europe (54)
        • Southeastern Europe (143)
      • North America (496)
      • Asia (680)
        • General (123)
        • China (392)
        • Japan (51)
        • Korea (27)
        • India (87)
      • Middle East (144)
      • Other (40)
      • South America (82)
    • Other (3.019)
      • Recycling/Disposal (2.171)
      • Economic Trend (475)
      • Services (41)
      • Logistics (255)
      • Energy (77)
  • Production and Engineering (3.810)
    • Polymer Materials (2.374)
      • Petrochemicals (60)
      • Charge (444)
        • General (14)
        • Masterbatches (113)
        • Additives (229)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.839)
        • General (30)
        • Standard Themoplastics (367)
        • Technical Thermoplastics (603)
          • General (19)
          • Styrene Copolymers (63)
          • PC/PMMA (64)
          • Polyamides (208)
          • POM/PBT/PP (69)
          • Technical Compounds (180)
        • PUR (73)
        • Other (766)
          • General (23)
          • Composites/Thermosets (108)
          • High Performance (160)
          • Biopolymers (249)
          • Elastomers/TPE (114)
          • Recyclate (112)
      • Other (31)
    • Machinery (95)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (32)
        • General (16)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (438)
      • Polymer Materials (144)
      • Technical (15)
      • Product Development (41)
      • Process (83)
      • Application (93)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (58)
    • New Products (864)
      • Packaging (569)
      • Construction (35)
      • Automotive / Transport (100)
      • Electrical Appliances (27)
      • Consumer Goods (50)
      • Medical (37)
      • Technical (8)
      • Other (38)
    • Other (39)
  • Management (754)
    • Purchasing (105)
    • General Management (173)
    • Company organisation (45)
    • Marketing/Sales (15)
    • Human Resources (7)
    • Finances (98)
    • Logistics (311)
  • People (1.505)
  • Industry (6.392)
    • General (1.244)
    • Associations/Institutions (2.436)
    • Legislation (1.399)
    • Environment / Health (1.303)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.162)
  • Plastic Fantastic (563)
  • Commentaries (84)
  • Interviews (150)
  • Notes by Publisher (73)
Energy Cost Surcharges
Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team
© 2025 by Plastics Information Europe, Bad Homburg
Date of print: 28/11/2025
Ref: 3ck4wu45fwlccx45nqqgdqah
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?node=100073&page=6&pageid=302