www.pieweb.com

Polymer Prices Recyclate

POLYMER PRICES
Standard Recyclate April 2017: Oversupply provokes slight erosion of rPE prices / rPP and rPS mostly stable / Seasonal effects supporting rPET / Diverging trends will continue in April
21.04.2017
POLYMER PRICES
Engineering Recyclate March 2017: Massive price increases / Peak still not reached / Lively demand results in the first bottlenecks / Recycling companies near to their capacity limits
21.03.2017
POLYMER PRICES
Standard Recyclate March 2017: Prices almost at a standstill despite increased virgin material notations / Noticeable premiums only on rPET and rPS / Recyclers aiming for price increases across the board
20.03.2017
POLYMER PRICES
Engineering Recyclate February 2017: Increases on the primary market begin to impact secondary products / Response with PA and PC/ABS blends / Adequate supply, demand and capacity utilisation / Base material likely to become more expensive in March
20.02.2017
POLYMER PRICES
Standard Recyclate February 2017: Notations broadly trending upwards / Increased virgin material prices make secondary materials more attractive / Further increases expected for March
17.02.2017
POLYMER PRICES
Engineering Recyclate January 2017: Little movement in January / Reasonable ordering activity with availability normal / Price rises likely in February on a broad front / ABS will be affected most
20.01.2017
POLYMER PRICES
Standard Recyclate January 2017: Prices have bottomed out / Higher virgin material prices lead to first increases / Stock build-up has been stopped / New premiums likely in February
19.01.2017
POLYMER PRICES
Engineering Recyclate December 2016: Secondary materials unchanged at year's end / Demand significantly weaker / Flood of orders for Q1 / Price hikes likely for some grades in new year
22.12.2016
POLYMER PRICES
Standard Recyclate December 2016: Notations still trending down / Only rPET rolls over / Poor demand / Bottom could soon be reached / Virgin market developments have stabilising effect
21.12.2016
POLYMER PRICES
Engineering Recyclate November 2016: Notations mostly stable / Uptrend likely / With year-end approaching, demand takes another dip / Abundance of scrap material
21.11.2016
POLYMER PRICES
Standard Recyclate November 2016: Notations still under pressure / Oversupply results in slight erosion / Demand remains comparatively weak / Additional declines likely
18.11.2016
POLYMER PRICES
Engineering Recyclate October 2016: Notations predominantly stable / Individual peaks for rPA and rPOM are capped / Demand below expectations / Little effect felt from producers' calls for hikes on the primary market
21.10.2016
POLYMER PRICES
Standard Recyclate October 2016: Notations are under pressure / Largest rebates for rPS and rLDPE / Demand rather weak / Amid lack of any stimuli, no trend reversal in sight
20.10.2016
POLYMER PRICES
Engineering Recyclate September 2016: Most prices continue to crumble / Primary market developments put recyclers under pressure / Demand subdued even after end to the holidays
23.09.2016
POLYMER PRICES
Standard Recyclate September 2016: Notations decline slightly across the board / rPP and rPS resist downtrend / Demand at times below expectations / Stability expected in October
22.09.2016
POLYMER PRICES
Engineering Recyclate August 2016: Virgin material surplus rings in landslide in secondary market notations / Polyamides and polycarbonate strongest affected / Despite signs of stabilisation, minor tremors still possible
22.08.2016
POLYMER PRICES
Standard Recyclate August 2016: Falling primary prices take notations down / Demand dampened by summer holidays / Stabilisation appears to set in / Cost of some secondary materials likely to rise again
19.08.2016
POLYMER PRICES
Engineering Recyclate July 2016: Notations unchanged apart from rABS and rPP compounds / Other materials reflect primary market's stability / Few changes expected in August
21.07.2016
POLYMER PRICES
Standard Recyclate July 2016: Little movement at onset of holiday season / Solely some slight downward corrections / Availability of production scrap improves / Insiders expect rising pressure from virgin material developments
20.07.2016
POLYMER PRICES
Engineering Recyclate June 2016: Higher feedstock notations have little effect on recyclate prices / Small upward corrections for rABS, rPA 6 and rPC / Market jitters about future indexing of PP
20.06.2016
POLYMER PRICES
Standard Recyclate June 2016: Notations start pointing down / Only rPP and rPS resist the trend / Muted demand results in high inventory levels / Further erosion expected in July
17.06.2016
POLYMER PRICES
Engineering Recyclate May 2016: General uptrend increasingly impacts secondary market / Threat of widespread hikes / Only exception is rPOM
20.05.2016
POLYMER PRICES
Standard Recyclate May 2016: Lower end of the rPE spectrum is lifted / rHIPS notations follow the uptrend in virgin material prices / Remaining grades mostly stable / Further upward drift
19.05.2016
POLYMER PRICES
Engineering Recyclate April 2016: Downtrend comes to an end / Initial hikes for rABS, rPC and rPP / Notations likely to continue rising in May / Numerous holidays will impact business activity
20.04.2016
POLYMER PRICES
Standard Recyclate April 2016: Notations make a turnaround / First reaction to rising virgin material prices / Seasonal business picks up / Additional hikes likely
19.04.2016
Seite 9 von 15
Topic search
Plastics Information Europe
  • Polymer Prices (6.046)
    • Petrochemicals (487)
    • Standard Thermoplastics (960)
    • PET (249)
    • Engineering Thermoplastics (255)
    • Recyclate (370)
      • General (3)
      • Standard Thermoplastics / Recyclate (183)
      • Engineering Thermoplastics / Recyclate (184)
    • Polyurethanes (247)
    • High Performance Polymers (2)
    • Composites (182)
    • Announcements (2.574)
    • World Regions (583)
      • China (292)
        • Standard Thermoplastics (147)
        • Engineering Thermoplastics (145)
      • North America (167)
      • Russia (124)
    • Spot Prices (125)
    • Forecasts (12)
  • Companies (34.497)
    • Polymer Materials (17.041)
      • Petrochemicals (3.072)
      • Charge (1.849)
        • General (89)
        • Masterbatches (339)
        • Additives (774)
        • Colours (379)
        • Reinforcements/Fillers (268)
      • Polymers (10.954)
        • General (711)
        • Standard Thermoplastics (3.793)
          • General (113)
          • Polyolefins (1.930)
          • Polystyrenes (335)
          • PVC (662)
          • Polyester (557)
          • Expandable (PS, PP, PE) (196)
        • Technical Thermoplastics (3.231)
          • General (349)
          • Styrene Copolymers (259)
          • PC/PMMA (458)
          • Polyamides (895)
          • POM/PBT/PP (315)
          • Technical Compounds (955)
        • PUR (781)
        • Other (2.438)
          • General (101)
          • Composites/Thermosets (406)
          • High Performance (608)
          • Biopolymers (697)
          • Elastomers/TPE (368)
          • Recyclate (258)
      • Distribution (1.166)
    • Machinery (1.085)
      • General (28)
      • Plant Construction (138)
      • Core Machines (740)
        • General (89)
        • Extrusion (180)
        • Injection Moulding (368)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (174)
        • General (31)
        • Control Systems (4)
        • Automatisation (33)
        • Dies/Tools/Moulds (93)
        • Components (13)
      • Finishing (5)
    • Processing (7.108)
      • General (892)
      • Extrusion (2.332)
        • General (119)
        • Flexible Films (1.126)
        • Rigid Films/Sheet (378)
        • Pipes (349)
        • Profiles/Rods (257)
        • Other (103)
      • Injection Moulding (1.710)
      • Blow Moulding (510)
      • PUR (305)
      • Other (1.121)
        • General (120)
        • Foam (305)
        • Composites/Thermosets (350)
        • Thermoforming (217)
        • Rotational Moulding (32)
        • Additive Manufacturing (97)
      • Finishing (238)
    • Application (7.295)
      • General (128)
      • Packaging (3.151)
      • Construction (720)
      • Automotive / Transport (1.671)
      • Electrical Appliances (336)
      • Consumer Goods (679)
      • Medical (397)
      • Technical (213)
    • Other (1.968)
      • Recycling/Disposal (1.583)
      • Services (253)
      • Logistics (132)
  • Commercial Register (122)
    • Insolvency (117)
    • Changes (5)
  • Markets (23.259)
    • Polymer Materials (10.060)
      • Petrochemicals (2.470)
      • Charge (855)
        • General (38)
        • Masterbatches (94)
        • Additives (338)
        • Colours (156)
        • Reinforcements/Fillers (229)
      • Polymers (6.352)
        • General (786)
        • Standard Thermoplastics (2.428)
          • General (74)
          • Polyolefins (1.209)
          • Polystyrenes (157)
          • PVC (502)
          • Polyester (346)
          • Expandable (PS, PP, PE) (140)
        • Technical Thermoplastics (1.276)
          • General (87)
          • Styrene Copolymers (105)
          • PC/PMMA (151)
          • Polyamides (438)
          • POM/PBT/PP (110)
          • Technical Compounds (385)
        • PUR (453)
        • Other (1.409)
          • General (47)
          • Composites/Thermosets (292)
          • High Performance (302)
          • Biopolymers (431)
          • Elastomers/TPE (141)
          • Recyclate (196)
      • Other Materials (59)
      • Distribution (324)
    • Machinery (507)
      • General (129)
      • Plant Construction (14)
      • Core Machines (293)
        • General (111)
        • Extrusion (37)
        • Injection Moulding (124)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.690)
      • General (430)
      • Extrusion (607)
        • General (20)
        • Flexible Films (296)
        • Rigid Films/Sheets (119)
        • Pipes (72)
        • Profiles/Rods (89)
        • Other (11)
      • Injection Moulding (178)
      • Blow Moulding (43)
      • PUR (81)
      • Other (306)
        • General (20)
        • Foam (79)
        • Composites/Thermosets (140)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (39)
      • Finishing (45)
    • Applications (4.084)
      • General (42)
      • Packaging (1.975)
      • Construction (311)
      • Automotive / Transport (968)
      • Electrical Appliances (219)
      • Consumer Goods (254)
      • Medical (205)
      • Technical (60)
      • Other (50)
    • Regions and Countries (4.092)
      • World (195)
      • German-speaking Countries (483)
      • Europe (1.984)
        • General (479)
        • Italy (142)
        • France (155)
        • Spain/Portugal (100)
        • Great Britain/Ireland (507)
        • Low Countries (74)
        • Central Europe (177)
        • Scandinavia (46)
        • Russia (110)
        • Eastern Europe (53)
        • Southeastern Europe (141)
      • North America (489)
      • Asia (678)
        • General (122)
        • China (392)
        • Japan (51)
        • Korea (26)
        • India (87)
      • Middle East (143)
      • Other (39)
      • South America (81)
    • Other (2.826)
      • Recycling/Disposal (2.054)
      • Economic Trend (426)
      • Services (41)
      • Logistics (233)
      • Energy (72)
  • Production and Engineering (3.770)
    • Polymer Materials (2.350)
      • Petrochemicals (60)
      • Charge (439)
        • General (14)
        • Masterbatches (111)
        • Additives (226)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.820)
        • General (30)
        • Standard Themoplastics (362)
        • Technical Thermoplastics (600)
          • General (19)
          • Styrene Copolymers (63)
          • PC/PMMA (64)
          • Polyamides (205)
          • POM/PBT/PP (69)
          • Technical Compounds (180)
        • PUR (72)
        • Other (756)
          • General (21)
          • Composites/Thermosets (107)
          • High Performance (160)
          • Biopolymers (245)
          • Elastomers/TPE (114)
          • Recyclate (109)
      • Other (31)
    • Machinery (94)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (431)
      • Polymer Materials (144)
      • Technical (13)
      • Product Development (41)
      • Process (82)
      • Application (90)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (57)
    • New Products (856)
      • Packaging (565)
      • Construction (35)
      • Automotive / Transport (99)
      • Electrical Appliances (26)
      • Consumer Goods (49)
      • Medical (37)
      • Technical (7)
      • Other (38)
    • Other (39)
  • Management (712)
    • Purchasing (103)
    • General Management (159)
    • Company organisation (44)
    • Marketing/Sales (15)
    • Human Resources (7)
    • Finances (96)
    • Logistics (288)
  • People (1.496)
  • Industry (6.109)
    • General (1.204)
    • Associations/Institutions (2.339)
    • Legislation (1.312)
    • Environment / Health (1.244)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.146)
  • Plastic Fantastic (546)
  • Commentaries (82)
  • Interviews (141)
  • Notes by Publisher (72)
Energy Cost Surcharges
Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team
© 2025 by Plastics Information Europe, Bad Homburg
Date of print: 02/07/2025
Ref: isaugq551jd35y3l5iab4rnf
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?node=100072&page=9&pageid=302