Show topic list

Polymer Prices Recyclate

POLYMER PRICES Standard recyclate February: Rollover, slight premiums characterise pricing landscape / Seasonal effects expected to increase demand	14.02.2025
PLASTICS RECYCLING NETHERLANDS Pressure on Dutch firms continues / Local market reflects problems in Europe / “Market is flooded with virgin plastics from China”	20.01.2025
POLYMER PRICES Engineering recyclate January: December's ordering boom comes to an end / Compounders resume production gradually / Polypropylene trends differently from the rest	17.01.2025
POLYMER PRICES Standard recyclate January: Prices mostly roll over again / Demand remains weak / Imports further distort market	16.01.2025
YEAR-ENDER: POLYMER PRICES Cheaper materials from Asia pressure European manufacturers / PU, PET under special focus / Trump policies could raise European production costs / “If construction doesn't take off by March, the year is over.”	17.12.2024
POLYMER PRICES Engineering recyclate December: Recyclers, converters in year-end mode / Maintenance work starts early / Glimmer of hope for January	16.12.2024
POLYMER PRICES Standard recyclate December: High stocks paired with low volume calls / Extended plant holidays at many companies / No improvement expected in January	13.12.2024
POLYMER PRICES Engineering recyclate November: Price slump slows down / Converters nevertheless call for reductions / No recovery expected in December	18.11.2024
POLYMER PRICES Standard recyclate November: Weak demand puts further pressure on prices / Processors reduce stocks before year-end	15.11.2024
POLYMER PRICES Engineering recyclate October: No breather for recyclers at start of new quarter / Demand remains main problem	21.10.2024
POLYMER PRICES Standard recyclate October: Year drags to a close / Weak demand, declining prices / Inventory reduction dominates	18.10.2024
POLYMER PRICES Engineering recyclate September: Very weak demand despite price concessions / Recyclers' stocks fill up / No prospect of improvement yet	17.09.2024
POLYMER PRICES Standard recyclate September: Prices remain mostly stable / Sluggish demand despite end of holidays / Little change likely in October	16.09.2024
POLYMER PRICES Engineering recyclate August 2024: Prices crumble on weak demand / Recyclers' stock levels rise again / Somewhat better order book situation for converters expected in September	19.08.2024
POLYMER PRICES Standard recyclate August 2024: Market takes a summer break / Prices mostly rollover amid weak demand / More buoyancy expected in September	16.08.2024
POLYMER PRICES Engineering recyclate July 2024: Sales of all types at rock bottom / For most recyclers, price stability remains main issue	18.07.2024
POLYMER PRICES Standard recyclate July 2024: Summer, summer, summer – high stock levels and next to no demand / Everyone on the lookout for sales / Hopes pinned on September	17.07.2024
POLYMER PRICES Engineering recyclate June 2024: Prices undergo only very small upward corrections / No marked changes in either supply or demand / Stability expected in July	17.06.2024
POLYMER PRICES Standard recyclate June 2024: Declining prices for almost all materials / No positive stimuli ahead of summer slump	14.06.2024
POLYMER PRICES Engineering recyclate May 2024: Prices rise across the board / Growing demand from automotive and E&E / Trend likely to continue in June	17.05.2024
POLYMER PRICES Standard recyclate May 2024: Most prices gain buoyancy / Increased purchase costs cause problems for recyclers	16.05.2024
POLYMER PRICES Engineering recyclate April 2024: Mixed market leads to increasing momentum / Demand needs more impetus to reach normal again / Further price hikes on the table	17.04.2024
POLYMER PRICES Standard recyclate April 2024: Low demand keeps recyclers under pressure / Increasing imports of favourably priced virgin material cause grief	16.04.2024
POLYMER PRICES Engineering recyclate March 2024: Market lacks sufficient fundamental impulses for an upturn / Converters' poor order book situation puts pressure on demand / Longer Easter breaks planned	15.03.2024
POLYMER PRICES Standard recyclate March 2024: Prices continue to trend upwards / More expensive virgin material increases attractiveness of recycled grades	14.03.2024

Seite 2 von 16

Topic search

Plastics Information Europe

Polymer Prices (6.228)
- Petrochemicals (539)
- Standard Thermoplastics (1.000)
- PET (255)
- Engineering Thermoplastics (263)
- Recyclate (387)
  - General (6)
  - Standard Thermoplastics / Recyclate (190)
  - Engineering Thermoplastics / Recyclate (191)
- Polyurethanes (255)
- High Performance Polymers (2)
- Composites (189)
- Announcements (2.585)
- World Regions (602)
  - China (304)
    - Standard Thermoplastics (153)
    - Engineering Thermoplastics (151)
  - North America (174)
  - Russia (124)
- Spot Prices (132)
- Forecasts (19)
Companies (35.580)
- Polymer Materials (17.530)
  - Petrochemicals (3.173)
  - Charge (1.890)
    - General (94)
    - Masterbatches (342)
    - Additives (795)
    - Colours (388)
    - Reinforcements/Fillers (271)
  - Polymers (11.277)
    - General (727)
    - Standard Thermoplastics (3.909)
      - General (113)
      - Polyolefins (1.989)
      - Polystyrenes (349)
      - PVC (684)
      - Polyester (571)
      - Expandable (PS, PP, PE) (203)
    - Technical Thermoplastics (3.317)
      - General (350)
      - Styrene Copolymers (266)
      - PC/PMMA (472)
      - Polyamides (930)
      - POM/PBT/PP (322)
      - Technical Compounds (977)
    - PUR (803)
    - Other (2.521)
      - General (102)
      - Composites/Thermosets (413)
      - High Performance (632)
      - Biopolymers (708)
      - Elastomers/TPE (377)
      - Recyclate (289)
  - Distribution (1.190)
- Machinery (1.115)
  - General (30)
  - Plant Construction (143)
  - Core Machines (756)
    - General (91)
    - Extrusion (181)
    - Injection Moulding (379)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (181)
    - General (32)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (98)
    - Components (13)
  - Finishing (5)
- Processing (7.306)
  - General (913)
  - Extrusion (2.388)
    - General (125)
    - Flexible Films (1.154)
    - Rigid Films/Sheet (388)
    - Pipes (354)
    - Profiles/Rods (260)
    - Other (107)
  - Injection Moulding (1.773)
  - Blow Moulding (524)
  - PUR (322)
  - Other (1.145)
    - General (124)
    - Foam (312)
    - Composites/Thermosets (355)
    - Thermoforming (225)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (241)
- Application (7.524)
  - General (132)
  - Packaging (3.246)
  - Construction (741)
  - Automotive / Transport (1.727)
  - Electrical Appliances (352)
  - Consumer Goods (697)
  - Medical (408)
  - Technical (221)
- Other (2.105)
  - Recycling/Disposal (1.689)
  - Services (257)
  - Logistics (159)
Commercial Register (150)
- Insolvency (145)
- Changes (5)
Markets (24.176)
- Polymer Materials (10.438)
  - Petrochemicals (2.566)
  - Charge (875)
    - General (38)
    - Masterbatches (98)
    - Additives (347)
    - Colours (161)
    - Reinforcements/Fillers (231)
  - Polymers (6.600)
    - General (838)
    - Standard Thermoplastics (2.495)
      - General (74)
      - Polyolefins (1.247)
      - Polystyrenes (162)
      - PVC (512)
      - Polyester (358)
      - Expandable (PS, PP, PE) (142)
    - Technical Thermoplastics (1.329)
      - General (88)
      - Styrene Copolymers (111)
      - PC/PMMA (161)
      - Polyamides (460)
      - POM/PBT/PP (114)
      - Technical Compounds (395)
    - PUR (473)
    - Other (1.465)
      - General (47)
      - Composites/Thermosets (300)
      - High Performance (311)
      - Biopolymers (436)
      - Elastomers/TPE (145)
      - Recyclate (226)
  - Other Materials (60)
  - Distribution (337)
- Machinery (523)
  - General (131)
  - Plant Construction (14)
  - Core Machines (306)
    - General (116)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.732)
  - General (448)
  - Extrusion (625)
    - General (20)
    - Flexible Films (303)
    - Rigid Films/Sheets (126)
    - Pipes (75)
    - Profiles/Rods (90)
    - Other (11)
  - Injection Moulding (181)
  - Blow Moulding (43)
  - PUR (83)
  - Other (307)
    - General (20)
    - Foam (80)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.251)
  - General (47)
  - Packaging (2.058)
  - Construction (328)
  - Automotive / Transport (1.000)
  - Electrical Appliances (226)
  - Consumer Goods (268)
  - Medical (210)
  - Technical (61)
  - Other (53)
- Regions and Countries (4.164)
  - World (195)
  - German-speaking Countries (494)
  - Europe (2.031)
    - General (498)
    - Italy (145)
    - France (155)
    - Spain/Portugal (105)
    - Great Britain/Ireland (517)
    - Low Countries (75)
    - Central Europe (179)
    - Scandinavia (46)
    - Russia (114)
    - Eastern Europe (54)
    - Southeastern Europe (143)
  - North America (496)
  - Asia (681)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (28)
    - India (87)
  - Middle East (145)
  - Other (40)
  - South America (82)
- Other (3.068)
  - Recycling/Disposal (2.195)
  - Economic Trend (491)
  - Services (41)
  - Logistics (260)
  - Energy (81)
Production and Engineering (3.821)
- Polymer Materials (2.382)
  - Petrochemicals (61)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.845)
    - General (30)
    - Standard Themoplastics (368)
    - Technical Thermoplastics (604)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (208)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (74)
    - Other (769)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (160)
      - Biopolymers (250)
      - Elastomers/TPE (115)
      - Recyclate (113)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (439)
  - Polymer Materials (144)
  - Technical (15)
  - Product Development (41)
  - Process (83)
  - Application (94)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (866)
  - Packaging (570)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (27)
  - Consumer Goods (50)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (39)
Management (767)
- Purchasing (105)
- General Management (177)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (99)
- Logistics (318)
People (1.510)
Industry (6.449)
- General (1.253)
- Associations/Institutions (2.459)
- Legislation (1.415)
- Environment / Health (1.312)
- plas.TV - Plastics unite(d) (10)
Events (1.163)
Plastic Fantastic (566)
Commentaries (84)
Interviews (154)
Notes by Publisher (74)

Energy Cost Surcharges

Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team

Price survey methodology