Show topic list

Polymer Prices Recyclate

POLYMER PRICES Standard Recyclate April 2013: Sinking virgin prices have little effect / Building season lends impetus / rPE uneven / rPP continues sideways / Primary market provides a damper	18.04.2013
POLYMER PRICES Engineering Recyclate March 2013: Primary market price hikes drive triple-digit increases for rPA and rPC / rABS, rPOM and rPP remain stable / Brisk ordering / Rises in base polymer costs will continue in Q2 / Further price hikes in April	20.03.2013
POLYMER PRICES Standard Recyclate March 2013: Strong rollover in shadow of rising virgin prices / Slight upwind for rPE and rHIPS / rPP sideways / Input costs higher / Season starts will boost demand	19.03.2013
POLYMER PRICES Engineering Recyclate February 2013: Notations mostly firm / Automotive demand rising greatly / OEMs switch to cheaper secondary material / Muted upward pressure	22.02.2013
POLYMER PRICES Standard Recyclate February 2013: Flat notations reflect primary market weakness / Hike plans run aground on stable but expensive input costs / Budding spring demand and firm oil could support higher prices in March	21.02.2013
POLYMER PRICES Engineering Recyclate January 2013: Notations mostly firm as new year gets underway / rPA sheds a few feathers / Inventory top-ups lead to large volume sales / Primary market surge could engulf secondary materials, too	21.01.2013
POLYMER PRICES Standard Recyclate January 2013: Neater rLDPE moves up with virgin material / rHDPE, rPP and rPS firm / Restocking of LDPE regrind slower than expected / Base material prices rise	18.01.2013
POLYMER PRICES Engineering recyclate December 2012: Most grades end 2012 on a stable footing / Some PA materials suffer bruises / Quarterly contracts ensure base polymer will remain expensive / Threat of major virgin price hikes likely to drive recyclate notations up	17.12.2012
POLYMER PRICES Standard Recyclate December 2012: Wide price gap to virgin material takes pressure off rLDPE / Few weak spots in rHDPE / Weak rollover for rPP / Rises in primary notations expected for January	14.12.2012
POLYMER PRICES Engineering recyclate November 2012: Most grades roll over / Weak primary market pressures rABS and rPC/ABS / Orders decline considerably / Early production shut-downs aimed at supporting rollover	20.11.2012
POLYMER PRICES Standard recyclate November 2012: Dramatic declines for transparent material / Oversupply and seasonal weakness pressure rHDPE and rPP / rPS stable / Production cuts aimed at forcing rollover	19.11.2012
POLYMER PRICES Engineering recyclate October 2012: Recyclate prices not yet affected by weakness of primary market / Rollover predominates / First signs of notations crumbling for rPA and rPC / Demand slows down / Prices likely to remain stable for the time being	19.10.2012
POLYMER PRICES Standard Recyclate October 2012: Polyolefins in a strong rollover / Knock-on effect of downswing in primary market pressures rPS / Output slacker / Expensive input material drives recyclate notations	18.10.2012
POLYMER PRICES Engineering Recyclate September 2012: Most polymers see a rollover / Search for alternatives to expensive virgin material compensates weakening trend / Demand slowdown not yet visible	20.09.2012
POLYMER PRICES Standard Recyclate September 2012: rPE and rPP prices rising / Expensive primary polymers drive demand for neat regrind / More expensive base material costs / Pressure on margins brings risk of increase	19.09.2012
POLYMER PRICES Engineering Recyclate August 2012: Primary market rally upsets summer lull in secondary sector / Recyclers respond by hiking low-priced material / Base polymer threatened by new wave of price increases / Q3 could come to a turbulent end	20.08.2012
POLYMER PRICES Standard Recyclate August 2012: Primary market about-face hits rPE / rPP and rPS remain stable / Procurement costs tending higher / Building and agriculture segments lead seasonal rally	17.08.2012
POLYMER PRICES Engineering Recyclate July 2012: Little movement in early summer / Primary market turbulence has scant impact on secondary sector / Demand robust despite holiday period / Prices likely to roll over	20.07.2012
POLYMER PRICES Standard Recyclate July 2012: Bottoming out of primary notations curbs secondary sector rebates / rPS still in stable sideways mode / Renewed petrochemical price rally has recyclers ready to pounce	19.07.2012
POLYMER PRICES Engineering Recyclate June 2012: All grades roll over / Most plastic scrap easily available / rABS and rPP compounds tight / Approaching summer break could dampen demand / Slight risk of hikes for rPC	21.06.2012
POLYMER PRICES Standard Recyclate June 2012: Primary market's downturn impacts rLDPE and rPP / Niche grades and rPS still stable / Downward correction in recyclate notations appears inevitable	20.06.2012
POLYMER PRICES Engineering recyclate May 2012: rPA 6 and rPC prices rise despite slack bank holiday business / Other grades roll over / Plastic scrap still expensive but more readily available / Despite poor margins, prices likely to roll over at the end of Q2	17.05.2012
POLYMER PRICES Standard Recyclate May 2012: Only minor gains for producers / Buyers' hold-out in primary market influences secondary sector / Persistently high procurement costs meet order slowdown / First plants idled	16.05.2012
POLYMER PRICES Engineering recyclate April 2012: Rising trend as Q2 starts / Primary polymer increases roll on /Tight supply of input material drives secondary costs upward / Triple-digit increases could be in store for May	20.04.2012
POLYMER PRICES Standard recyclate April 2012: Breather from rLDPE film price rises / Slack Easter holiday demand brakes momentum / Capacity cuts for rPE / Tightness drives rPP and HIPS forward / Building season comes to life	19.04.2012

Seite 14 von 16

Topic search

Plastics Information Europe

Polymer Prices (6.451)
- Petrochemicals (598)
- Standard Thermoplastics (1.039)
- PET (262)
- Engineering Thermoplastics (270)
- Recyclate (401)
  - General (6)
  - Standard Thermoplastics / Recyclate (197)
  - Engineering Thermoplastics / Recyclate (198)
- Polyurethanes (262)
- High Performance Polymers (2)
- Composites (196)
- Announcements (2.630)
- World Regions (626)
  - China (320)
    - Standard Thermoplastics (161)
    - Engineering Thermoplastics (159)
  - North America (182)
  - Russia (124)
- Spot Prices (138)
- Forecasts (27)
Companies (36.756)
- Polymer Materials (18.095)
  - Petrochemicals (3.289)
  - Charge (1.941)
    - General (100)
    - Masterbatches (344)
    - Additives (821)
    - Colours (400)
    - Reinforcements/Fillers (276)
  - Polymers (11.653)
    - General (751)
    - Standard Thermoplastics (4.048)
      - General (114)
      - Polyolefins (2.060)
      - Polystyrenes (364)
      - PVC (714)
      - Polyester (586)
      - Expandable (PS, PP, PE) (210)
    - Technical Thermoplastics (3.423)
      - General (353)
      - Styrene Copolymers (283)
      - PC/PMMA (487)
      - Polyamides (971)
      - POM/PBT/PP (336)
      - Technical Compounds (993)
    - PUR (824)
    - Other (2.607)
      - General (106)
      - Composites/Thermosets (418)
      - High Performance (655)
      - Biopolymers (721)
      - Elastomers/TPE (386)
      - Recyclate (321)
  - Distribution (1.212)
- Machinery (1.139)
  - General (33)
  - Plant Construction (147)
  - Core Machines (766)
    - General (92)
    - Extrusion (183)
    - Injection Moulding (386)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (187)
    - General (36)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (100)
    - Components (13)
  - Finishing (6)
- Processing (7.521)
  - General (942)
  - Extrusion (2.441)
    - General (131)
    - Flexible Films (1.183)
    - Rigid Films/Sheet (394)
    - Pipes (361)
    - Profiles/Rods (264)
    - Other (108)
  - Injection Moulding (1.832)
  - Blow Moulding (545)
  - PUR (338)
  - Other (1.173)
    - General (133)
    - Foam (317)
    - Composites/Thermosets (362)
    - Thermoforming (231)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (250)
- Application (7.736)
  - General (141)
  - Packaging (3.340)
  - Construction (759)
  - Automotive / Transport (1.779)
  - Electrical Appliances (358)
  - Consumer Goods (713)
  - Medical (420)
  - Technical (226)
- Other (2.265)
  - Recycling/Disposal (1.810)
  - Services (263)
  - Logistics (192)
Commercial Register (169)
- Insolvency (163)
- Changes (6)
Markets (25.134)
- Polymer Materials (10.836)
  - Petrochemicals (2.673)
  - Charge (892)
    - General (41)
    - Masterbatches (100)
    - Additives (350)
    - Colours (165)
    - Reinforcements/Fillers (236)
  - Polymers (6.860)
    - General (896)
    - Standard Thermoplastics (2.586)
      - General (75)
      - Polyolefins (1.292)
      - Polystyrenes (170)
      - PVC (535)
      - Polyester (371)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.378)
      - General (90)
      - Styrene Copolymers (122)
      - PC/PMMA (166)
      - Polyamides (481)
      - POM/PBT/PP (116)
      - Technical Compounds (403)
    - PUR (483)
    - Other (1.517)
      - General (48)
      - Composites/Thermosets (305)
      - High Performance (316)
      - Biopolymers (445)
      - Elastomers/TPE (150)
      - Recyclate (253)
  - Other Materials (61)
  - Distribution (350)
- Machinery (531)
  - General (134)
  - Plant Construction (15)
  - Core Machines (309)
    - General (119)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (73)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (35)
- Processing (1.777)
  - General (482)
  - Extrusion (630)
    - General (20)
    - Flexible Films (306)
    - Rigid Films/Sheets (126)
    - Pipes (76)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.438)
  - General (53)
  - Packaging (2.155)
  - Construction (349)
  - Automotive / Transport (1.033)
  - Electrical Appliances (233)
  - Consumer Goods (278)
  - Medical (215)
  - Technical (64)
  - Other (58)
- Regions and Countries (4.243)
  - World (197)
  - German-speaking Countries (504)
  - Europe (2.084)
    - General (513)
    - Italy (149)
    - France (157)
    - Spain/Portugal (106)
    - Great Britain/Ireland (531)
    - Low Countries (75)
    - Central Europe (183)
    - Scandinavia (48)
    - Russia (118)
    - Eastern Europe (61)
    - Southeastern Europe (143)
  - North America (501)
  - Asia (683)
    - General (123)
    - China (393)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (151)
  - Other (40)
  - South America (83)
- Other (3.309)
  - Recycling/Disposal (2.334)
  - Economic Trend (554)
  - Services (41)
  - Logistics (293)
  - Energy (87)
Production and Engineering (3.858)
- Polymer Materials (2.404)
  - Petrochemicals (66)
  - Charge (446)
    - General (15)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.861)
    - General (32)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (75)
    - Other (779)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (162)
      - Biopolymers (254)
      - Elastomers/TPE (115)
      - Recyclate (117)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (445)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (42)
  - Process (84)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (874)
  - Packaging (575)
  - Construction (35)
  - Automotive / Transport (101)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (40)
Management (836)
- Purchasing (110)
- General Management (205)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (102)
- Logistics (351)
People (1.516)
Industry (6.759)
- General (1.306)
- Associations/Institutions (2.566)
- Legislation (1.520)
- Environment / Health (1.357)
- plas.TV - Plastics unite(d) (10)
Events (1.192)
Plastic Fantastic (585)
Commentaries (87)
Interviews (168)
Notes by Publisher (83)

Energy Cost Surcharges

Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team

Price survey methodology