www.pieweb.com

Polymer Prices Recyclate

POLYMER PRICES
Engineering Recyclate September 2016: Most prices continue to crumble / Primary market developments put recyclers under pressure / Demand subdued even after end to the holidays
23.09.2016
POLYMER PRICES
Standard Recyclate September 2016: Notations decline slightly across the board / rPP and rPS resist downtrend / Demand at times below expectations / Stability expected in October
22.09.2016
POLYMER PRICES
Engineering Recyclate August 2016: Virgin material surplus rings in landslide in secondary market notations / Polyamides and polycarbonate strongest affected / Despite signs of stabilisation, minor tremors still possible
22.08.2016
POLYMER PRICES
Standard Recyclate August 2016: Falling primary prices take notations down / Demand dampened by summer holidays / Stabilisation appears to set in / Cost of some secondary materials likely to rise again
19.08.2016
POLYMER PRICES
Engineering Recyclate July 2016: Notations unchanged apart from rABS and rPP compounds / Other materials reflect primary market's stability / Few changes expected in August
21.07.2016
POLYMER PRICES
Standard Recyclate July 2016: Little movement at onset of holiday season / Solely some slight downward corrections / Availability of production scrap improves / Insiders expect rising pressure from virgin material developments
20.07.2016
POLYMER PRICES
Engineering Recyclate June 2016: Higher feedstock notations have little effect on recyclate prices / Small upward corrections for rABS, rPA 6 and rPC / Market jitters about future indexing of PP
20.06.2016
POLYMER PRICES
Standard Recyclate June 2016: Notations start pointing down / Only rPP and rPS resist the trend / Muted demand results in high inventory levels / Further erosion expected in July
17.06.2016
POLYMER PRICES
Engineering Recyclate May 2016: General uptrend increasingly impacts secondary market / Threat of widespread hikes / Only exception is rPOM
20.05.2016
POLYMER PRICES
Standard Recyclate May 2016: Lower end of the rPE spectrum is lifted / rHIPS notations follow the uptrend in virgin material prices / Remaining grades mostly stable / Further upward drift
19.05.2016
POLYMER PRICES
Engineering Recyclate April 2016: Downtrend comes to an end / Initial hikes for rABS, rPC and rPP / Notations likely to continue rising in May / Numerous holidays will impact business activity
20.04.2016
POLYMER PRICES
Standard Recyclate April 2016: Notations make a turnaround / First reaction to rising virgin material prices / Seasonal business picks up / Additional hikes likely
19.04.2016
POLYMER PRICES
Engineering Recyclate March 2016: Only minor price reductions / Feedstocks expected to rise / Upward trend with primary material should stabilise recyclate prices / Early Easter will put a damper on demand
18.03.2016
POLYMER PRICES
Standard Recyclate March 2016: Prices still going down a bit / Slight aftershock of recent discounts on virgin materials / Stabilisation expected / Recyclers consider increases in the near future
17.03.2016
POLYMER PRICES
Engineering Recyclate February 2016: Declines become more widespread / Cheaper virgin material increasingly pressures regrind / Primary market slide expected to bottom out
18.02.2016
POLYMER PRICES
Standard Recyclate February 2016: Downtrend affects all grades / Greater declines for purer grades / Demand normal for the season / Prices likely to have bottomed out
17.02.2016
POLYMER PRICES
Engineering Recyclate January 2016: Virgin material declines ring in slight fall for most regrind grades / Only rABS and rPOM hold stable / Top-up effect drives demand / Notations expected to bottom out
20.01.2016
POLYMER PRICES
Standard Recyclate January 2016: Declines across the entire rLDPE spectrum / Other regrind materials mostly stable / Demand surprisingly lively / Primary market sends mixed signals for the weeks to come
19.01.2016
POLYMER PRICES
Engineering Recyclate December 2015: PA and PC downslide comes to a halt / Prices likely to bottom out soon / Demand drops significantly in December / January order books nevertheless already full
21.12.2015
POLYMER PRICES
Standard Recyclate December 2015: Notations mostly roll over / A few adjustments here and there / Rise in virgin material only affects a few pure grades / Good scrap availability / Prices likely to remain stable entering the new year
18.12.2015
POLYMER PRICES
Engineering Recyclate November 2015: Downtrend in unreinforced rPA continues / Other grades mostly roll over / Availability suffices to meet stable demand / Processors busy securing volumes for January
20.11.2015
POLYMER PRICES
Standard Recyclate November 2015: No major movements / Neat scrap trends upward / Mixed regrind sees further erosion / Across-the-board hikes in sight for December
19.11.2015
POLYMER PRICES
Engineering Recyclate October 2015: PA and PC notations take a nosedive following virgin material declines / Other regrind materials mostly stable / Demand quite respectable towards year's end
21.10.2015
POLYMER PRICES
Standard Recyclate October 2015: Moderate declines / Recent slump in virgin notations takes a bite out of secondary materials / Primary wave of increases starts to ebb / Stabilisation within sight
20.10.2015
POLYMER PRICES
Engineering Recyclate September 2015: Little movement / Cost declines from petrochemicals and primary markets have not yet filtered through / rPOM slips / rABS and rPP compounds prices could decline
21.09.2015
Seite 11 von 16
Topic search
Plastics Information Europe
  • Polymer Prices (6.536)
    • Petrochemicals (622)
    • Standard Thermoplastics (1.057)
    • PET (265)
    • Engineering Thermoplastics (273)
    • Recyclate (409)
      • General (6)
      • Standard Thermoplastics / Recyclate (201)
      • Engineering Thermoplastics / Recyclate (202)
    • Polyurethanes (265)
    • High Performance Polymers (2)
    • Composites (199)
    • Announcements (2.637)
    • World Regions (635)
      • China (326)
        • Standard Thermoplastics (164)
        • Engineering Thermoplastics (162)
      • North America (185)
      • Russia (124)
    • Spot Prices (142)
    • Forecasts (30)
  • Companies (37.279)
    • Polymer Materials (18.297)
      • Petrochemicals (3.331)
      • Charge (1.962)
        • General (102)
        • Masterbatches (347)
        • Additives (834)
        • Colours (402)
        • Reinforcements/Fillers (277)
      • Polymers (11.780)
        • General (759)
        • Standard Thermoplastics (4.092)
          • General (114)
          • Polyolefins (2.083)
          • Polystyrenes (366)
          • PVC (728)
          • Polyester (589)
          • Expandable (PS, PP, PE) (212)
        • Technical Thermoplastics (3.456)
          • General (354)
          • Styrene Copolymers (286)
          • PC/PMMA (491)
          • Polyamides (984)
          • POM/PBT/PP (341)
          • Technical Compounds (1.000)
        • PUR (833)
        • Other (2.640)
          • General (108)
          • Composites/Thermosets (420)
          • High Performance (661)
          • Biopolymers (726)
          • Elastomers/TPE (390)
          • Recyclate (335)
      • Distribution (1.224)
    • Machinery (1.148)
      • General (33)
      • Plant Construction (148)
      • Core Machines (771)
        • General (92)
        • Extrusion (184)
        • Injection Moulding (389)
        • Blow Moulding (73)
        • Foam (12)
        • PUR (17)
        • Compression Moulding (4)
      • Peripherals (190)
        • General (36)
        • Control Systems (4)
        • Automatisation (35)
        • Dies/Tools/Moulds (102)
        • Components (13)
      • Finishing (6)
    • Processing (7.631)
      • General (951)
      • Extrusion (2.475)
        • General (132)
        • Flexible Films (1.200)
        • Rigid Films/Sheet (398)
        • Pipes (367)
        • Profiles/Rods (265)
        • Other (113)
      • Injection Moulding (1.862)
      • Blow Moulding (555)
      • PUR (343)
      • Other (1.190)
        • General (137)
        • Foam (321)
        • Composites/Thermosets (365)
        • Thermoforming (234)
        • Rotational Moulding (36)
        • Additive Manufacturing (97)
      • Finishing (255)
    • Application (7.866)
      • General (147)
      • Packaging (3.390)
      • Construction (772)
      • Automotive / Transport (1.808)
      • Electrical Appliances (363)
      • Consumer Goods (726)
      • Medical (425)
      • Technical (235)
    • Other (2.337)
      • Recycling/Disposal (1.865)
      • Services (265)
      • Logistics (207)
  • Commercial Register (179)
    • Insolvency (173)
    • Changes (6)
  • Markets (25.499)
    • Polymer Materials (10.972)
      • Petrochemicals (2.709)
      • Charge (900)
        • General (43)
        • Masterbatches (100)
        • Additives (354)
        • Colours (166)
        • Reinforcements/Fillers (237)
      • Polymers (6.947)
        • General (913)
        • Standard Thermoplastics (2.610)
          • General (75)
          • Polyolefins (1.304)
          • Polystyrenes (171)
          • PVC (543)
          • Polyester (374)
          • Expandable (PS, PP, PE) (143)
        • Technical Thermoplastics (1.396)
          • General (92)
          • Styrene Copolymers (122)
          • PC/PMMA (167)
          • Polyamides (489)
          • POM/PBT/PP (118)
          • Technical Compounds (408)
        • PUR (489)
        • Other (1.539)
          • General (50)
          • Composites/Thermosets (309)
          • High Performance (319)
          • Biopolymers (446)
          • Elastomers/TPE (151)
          • Recyclate (264)
      • Other Materials (61)
      • Distribution (355)
    • Machinery (537)
      • General (134)
      • Plant Construction (15)
      • Core Machines (313)
        • General (119)
        • Extrusion (38)
        • Injection Moulding (133)
        • Blow Moulding (15)
        • PUR (6)
        • Compression Moulding (2)
      • Peripherals (75)
        • General (21)
        • Automatisation (18)
        • Dies/Tools/Moulds (36)
    • Processing (1.785)
      • General (488)
      • Extrusion (631)
        • General (20)
        • Flexible Films (307)
        • Rigid Films/Sheets (126)
        • Pipes (76)
        • Profiles/Rods (91)
        • Other (11)
      • Injection Moulding (183)
      • Blow Moulding (43)
      • PUR (84)
      • Other (311)
        • General (20)
        • Foam (82)
        • Composites/Thermosets (142)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (39)
      • Finishing (45)
    • Applications (4.529)
      • General (55)
      • Packaging (2.201)
      • Construction (360)
      • Automotive / Transport (1.050)
      • Electrical Appliances (238)
      • Consumer Goods (282)
      • Medical (218)
      • Technical (64)
      • Other (61)
    • Regions and Countries (4.274)
      • World (197)
      • German-speaking Countries (504)
      • Europe (2.109)
        • General (526)
        • Italy (152)
        • France (158)
        • Spain/Portugal (107)
        • Great Britain/Ireland (534)
        • Low Countries (75)
        • Central Europe (184)
        • Scandinavia (48)
        • Russia (119)
        • Eastern Europe (63)
        • Southeastern Europe (143)
      • North America (503)
      • Asia (684)
        • General (123)
        • China (394)
        • Japan (51)
        • Korea (28)
        • India (88)
      • Middle East (152)
      • Other (41)
      • South America (84)
    • Other (3.402)
      • Recycling/Disposal (2.389)
      • Economic Trend (573)
      • Services (44)
      • Logistics (307)
      • Energy (89)
  • Production and Engineering (3.886)
    • Polymer Materials (2.420)
      • Petrochemicals (66)
      • Charge (451)
        • General (15)
        • Masterbatches (116)
        • Additives (232)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.871)
        • General (32)
        • Standard Themoplastics (370)
        • Technical Thermoplastics (606)
          • General (20)
          • Styrene Copolymers (63)
          • PC/PMMA (64)
          • Polyamides (209)
          • POM/PBT/PP (69)
          • Technical Compounds (181)
        • PUR (76)
        • Other (787)
          • General (23)
          • Composites/Thermosets (108)
          • High Performance (163)
          • Biopolymers (255)
          • Elastomers/TPE (115)
          • Recyclate (123)
      • Other (32)
    • Machinery (95)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (32)
        • General (16)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (450)
      • Polymer Materials (146)
      • Technical (16)
      • Product Development (43)
      • Process (84)
      • Application (97)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (60)
    • New Products (881)
      • Packaging (578)
      • Construction (35)
      • Automotive / Transport (104)
      • Electrical Appliances (28)
      • Consumer Goods (51)
      • Medical (39)
      • Technical (8)
      • Other (38)
    • Other (40)
  • Management (866)
    • Purchasing (111)
    • General Management (216)
    • Company organisation (45)
    • Marketing/Sales (16)
    • Human Resources (8)
    • Finances (105)
    • Logistics (365)
  • People (1.521)
  • Industry (6.887)
    • General (1.328)
    • Associations/Institutions (2.608)
    • Legislation (1.564)
    • Environment / Health (1.377)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.205)
  • Plastic Fantastic (594)
  • Commentaries (90)
  • Interviews (170)
  • Notes by Publisher (85)
Energy Cost Surcharges
Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team
© 2026 by Plastics Information Europe, Bad Homburg
Date of print: 20/11/2026
Ref: grnnna3s5wurxz31jusuapnc
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?node=100072&page=11&pageid=302