Show topic list

Polymer Prices Recyclate

POLYMER PRICES Standard Recyclate March 2017: Prices almost at a standstill despite increased virgin material notations / Noticeable premiums only on rPET and rPS / Recyclers aiming for price increases across the board	20.03.2017
POLYMER PRICES Engineering Recyclate February 2017: Increases on the primary market begin to impact secondary products / Response with PA and PC/ABS blends / Adequate supply, demand and capacity utilisation / Base material likely to become more expensive in March	20.02.2017
POLYMER PRICES Standard Recyclate February 2017: Notations broadly trending upwards / Increased virgin material prices make secondary materials more attractive / Further increases expected for March	17.02.2017
POLYMER PRICES Engineering Recyclate January 2017: Little movement in January / Reasonable ordering activity with availability normal / Price rises likely in February on a broad front / ABS will be affected most	20.01.2017
POLYMER PRICES Standard Recyclate January 2017: Prices have bottomed out / Higher virgin material prices lead to first increases / Stock build-up has been stopped / New premiums likely in February	19.01.2017
POLYMER PRICES Engineering Recyclate December 2016: Secondary materials unchanged at year's end / Demand significantly weaker / Flood of orders for Q1 / Price hikes likely for some grades in new year	22.12.2016
POLYMER PRICES Standard Recyclate December 2016: Notations still trending down / Only rPET rolls over / Poor demand / Bottom could soon be reached / Virgin market developments have stabilising effect	21.12.2016
POLYMER PRICES Engineering Recyclate November 2016: Notations mostly stable / Uptrend likely / With year-end approaching, demand takes another dip / Abundance of scrap material	21.11.2016
POLYMER PRICES Standard Recyclate November 2016: Notations still under pressure / Oversupply results in slight erosion / Demand remains comparatively weak / Additional declines likely	18.11.2016
POLYMER PRICES Engineering Recyclate October 2016: Notations predominantly stable / Individual peaks for rPA and rPOM are capped / Demand below expectations / Little effect felt from producers' calls for hikes on the primary market	21.10.2016
POLYMER PRICES Standard Recyclate October 2016: Notations are under pressure / Largest rebates for rPS and rLDPE / Demand rather weak / Amid lack of any stimuli, no trend reversal in sight	20.10.2016
POLYMER PRICES Engineering Recyclate September 2016: Most prices continue to crumble / Primary market developments put recyclers under pressure / Demand subdued even after end to the holidays	23.09.2016
POLYMER PRICES Standard Recyclate September 2016: Notations decline slightly across the board / rPP and rPS resist downtrend / Demand at times below expectations / Stability expected in October	22.09.2016
POLYMER PRICES Engineering Recyclate August 2016: Virgin material surplus rings in landslide in secondary market notations / Polyamides and polycarbonate strongest affected / Despite signs of stabilisation, minor tremors still possible	22.08.2016
POLYMER PRICES Standard Recyclate August 2016: Falling primary prices take notations down / Demand dampened by summer holidays / Stabilisation appears to set in / Cost of some secondary materials likely to rise again	19.08.2016
POLYMER PRICES Engineering Recyclate July 2016: Notations unchanged apart from rABS and rPP compounds / Other materials reflect primary market's stability / Few changes expected in August	21.07.2016
POLYMER PRICES Standard Recyclate July 2016: Little movement at onset of holiday season / Solely some slight downward corrections / Availability of production scrap improves / Insiders expect rising pressure from virgin material developments	20.07.2016
POLYMER PRICES Engineering Recyclate June 2016: Higher feedstock notations have little effect on recyclate prices / Small upward corrections for rABS, rPA 6 and rPC / Market jitters about future indexing of PP	20.06.2016
POLYMER PRICES Standard Recyclate June 2016: Notations start pointing down / Only rPP and rPS resist the trend / Muted demand results in high inventory levels / Further erosion expected in July	17.06.2016
POLYMER PRICES Engineering Recyclate May 2016: General uptrend increasingly impacts secondary market / Threat of widespread hikes / Only exception is rPOM	20.05.2016
POLYMER PRICES Standard Recyclate May 2016: Lower end of the rPE spectrum is lifted / rHIPS notations follow the uptrend in virgin material prices / Remaining grades mostly stable / Further upward drift	19.05.2016
POLYMER PRICES Engineering Recyclate April 2016: Downtrend comes to an end / Initial hikes for rABS, rPC and rPP / Notations likely to continue rising in May / Numerous holidays will impact business activity	20.04.2016
POLYMER PRICES Standard Recyclate April 2016: Notations make a turnaround / First reaction to rising virgin material prices / Seasonal business picks up / Additional hikes likely	19.04.2016
POLYMER PRICES Engineering Recyclate March 2016: Only minor price reductions / Feedstocks expected to rise / Upward trend with primary material should stabilise recyclate prices / Early Easter will put a damper on demand	18.03.2016
POLYMER PRICES Standard Recyclate March 2016: Prices still going down a bit / Slight aftershock of recent discounts on virgin materials / Stabilisation expected / Recyclers consider increases in the near future	17.03.2016

Seite 10 von 16

Topic search

Plastics Information Europe

Polymer Prices (6.350)
- Petrochemicals (565)
- Standard Thermoplastics (1.019)
- PET (258)
- Engineering Thermoplastics (266)
- Recyclate (395)
  - General (6)
  - Standard Thermoplastics / Recyclate (194)
  - Engineering Thermoplastics / Recyclate (195)
- Polyurethanes (259)
- High Performance Polymers (2)
- Composites (192)
- Announcements (2.622)
- World Regions (614)
  - China (312)
    - Standard Thermoplastics (157)
    - Engineering Thermoplastics (155)
  - North America (178)
  - Russia (124)
- Spot Prices (135)
- Forecasts (23)
Companies (36.158)
- Polymer Materials (17.794)
  - Petrochemicals (3.235)
  - Charge (1.912)
    - General (99)
    - Masterbatches (342)
    - Additives (806)
    - Colours (391)
    - Reinforcements/Fillers (274)
  - Polymers (11.450)
    - General (739)
    - Standard Thermoplastics (3.975)
      - General (113)
      - Polyolefins (2.024)
      - Polystyrenes (355)
      - PVC (698)
      - Polyester (579)
      - Expandable (PS, PP, PE) (206)
    - Technical Thermoplastics (3.359)
      - General (352)
      - Styrene Copolymers (270)
      - PC/PMMA (475)
      - Polyamides (951)
      - POM/PBT/PP (326)
      - Technical Compounds (985)
    - PUR (811)
    - Other (2.566)
      - General (105)
      - Composites/Thermosets (414)
      - High Performance (641)
      - Biopolymers (714)
      - Elastomers/TPE (382)
      - Recyclate (310)
  - Distribution (1.197)
- Machinery (1.125)
  - General (31)
  - Plant Construction (145)
  - Core Machines (761)
    - General (92)
    - Extrusion (182)
    - Injection Moulding (382)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (183)
    - General (33)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (99)
    - Components (13)
  - Finishing (5)
- Processing (7.422)
  - General (930)
  - Extrusion (2.417)
    - General (128)
    - Flexible Films (1.170)
    - Rigid Films/Sheet (391)
    - Pipes (357)
    - Profiles/Rods (264)
    - Other (107)
  - Injection Moulding (1.802)
  - Blow Moulding (533)
  - PUR (331)
  - Other (1.162)
    - General (128)
    - Foam (316)
    - Composites/Thermosets (360)
    - Thermoforming (228)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (247)
- Application (7.635)
  - General (137)
  - Packaging (3.296)
  - Construction (755)
  - Automotive / Transport (1.750)
  - Electrical Appliances (354)
  - Consumer Goods (703)
  - Medical (414)
  - Technical (226)
- Other (2.182)
  - Recycling/Disposal (1.747)
  - Services (260)
  - Logistics (175)
Commercial Register (164)
- Insolvency (158)
- Changes (6)
Markets (24.661)
- Polymer Materials (10.639)
  - Petrochemicals (2.623)
  - Charge (883)
    - General (39)
    - Masterbatches (98)
    - Additives (349)
    - Colours (162)
    - Reinforcements/Fillers (235)
  - Polymers (6.731)
    - General (866)
    - Standard Thermoplastics (2.540)
      - General (74)
      - Polyolefins (1.272)
      - Polystyrenes (166)
      - PVC (522)
      - Polyester (363)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.352)
      - General (89)
      - Styrene Copolymers (115)
      - PC/PMMA (162)
      - Polyamides (473)
      - POM/PBT/PP (114)
      - Technical Compounds (399)
    - PUR (477)
    - Other (1.496)
      - General (47)
      - Composites/Thermosets (302)
      - High Performance (314)
      - Biopolymers (441)
      - Elastomers/TPE (147)
      - Recyclate (245)
  - Other Materials (61)
  - Distribution (341)
- Machinery (526)
  - General (131)
  - Plant Construction (15)
  - Core Machines (308)
    - General (118)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.756)
  - General (464)
  - Extrusion (628)
    - General (20)
    - Flexible Films (305)
    - Rigid Films/Sheets (126)
    - Pipes (75)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (182)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.346)
  - General (51)
  - Packaging (2.103)
  - Construction (341)
  - Automotive / Transport (1.016)
  - Electrical Appliances (230)
  - Consumer Goods (275)
  - Medical (213)
  - Technical (63)
  - Other (54)
- Regions and Countries (4.205)
  - World (196)
  - German-speaking Countries (500)
  - Europe (2.057)
    - General (506)
    - Italy (148)
    - France (156)
    - Spain/Portugal (106)
    - Great Britain/Ireland (525)
    - Low Countries (75)
    - Central Europe (180)
    - Scandinavia (46)
    - Russia (115)
    - Eastern Europe (57)
    - Southeastern Europe (143)
  - North America (498)
  - Asia (683)
    - General (123)
    - China (393)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (148)
  - Other (40)
  - South America (83)
- Other (3.189)
  - Recycling/Disposal (2.260)
  - Economic Trend (529)
  - Services (41)
  - Logistics (275)
  - Energy (84)
Production and Engineering (3.845)
- Polymer Materials (2.395)
  - Petrochemicals (63)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.856)
    - General (31)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (74)
    - Other (776)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (161)
      - Biopolymers (253)
      - Elastomers/TPE (115)
      - Recyclate (116)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (445)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (42)
  - Process (84)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (871)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (39)
Management (807)
- Purchasing (109)
- General Management (194)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (102)
- Logistics (334)
People (1.514)
Industry (6.593)
- General (1.280)
- Associations/Institutions (2.512)
- Legislation (1.460)
- Environment / Health (1.331)
- plas.TV - Plastics unite(d) (10)
Events (1.178)
Plastic Fantastic (577)
Commentaries (85)
Interviews (161)
Notes by Publisher (80)

Energy Cost Surcharges

Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team

Price survey methodology