www.pieweb.com

Polymer Prices PET

POLYMER PRICES
PET April 2012: Notations follow costs downward / Slack ordering swells surplus / Imports livelier / Pressure on packaging resins remains despite firm feedstocks / New plants set to start up in China
03.05.2012
POLYMER PRICES
PET March 2012: Price wave goes out like a lamb / Asian demand sputtering / Imports create volume pressure in Europe / Demand still sluggish / Zenith appears to have been reached
03.04.2012
POLYMER PRICES
PET February 2012: Notations follow feedstocks upward / Strong worldwide demand growth keeps import volume down / Beverage season casts its shadow / Further upward price momentum likely in March
02.03.2012
POLYMER PRICES
PET January 2012: Producers successfully pass through higher costs but margin improvement falls short / Euro's weakness keeps imports at bay / Feedstocks could go even higher in February
02.02.2012
POLYMER PRICES
PET December 2011: Notations slip again, but bottom may have been reached / More stability in Asia / Supply long despite output cuts / Demand still softening / Upstream costs will determine market's direction
03.01.2012
POLYMER PRICES
PET November 2011: Notations take a triple-digit plunge / European market follows Asian polyester slide / Oversupply now a reality / Weak demand / Price wars in the end market / No let-up in pressure
02.12.2011
POLYMER PRICES
PET October 2011: Small increases in Europe reflect higher production costs / Asian softness pressures spot market / Producers' stockpiles widened / Cautious ordering / Falling notations on the horizon
02.11.2011
POLYMER PRICES
PET September 2011: Feedstocks higher, driven by China / European price hikes at the lower end of the global upswing / Imports continue to decline / Demand for film crumbles / Forward development is unclear
05.10.2011
POLYMER PRICES
PET August 2011: Price slide comes to a halt / Cost rises drive polymer notations back up / Asia still calls the tune / Import pressure eases / Sluggish demand / Upward momentum to continue in September
02.09.2011
POLYMER PRICES
PET July 2011: Notations decline by around EUR 40/t / Hard bargainers push some prices below the PIE range / North America and Asia firming / With imports dwindling, Europe could see a rollover in August
02.08.2011
POLYMER PRICES
PET June 2011: Notations start to slide / Range widens / Many products see triple-digit decline / Imports liven up market / Buyers' tactical order slowdown adds pressure / Asia now calling the tune
04.07.2011
POLYMER PRICES
PET May 2011: Notations follow receding costs downward / Fibres boom in Asia over / Cotton bubble on the way to bursting / Imports speedily return / No production problems / Slight downward price pressure
03.06.2011
POLYMER PRICES
PET April 2011: European notations caught in weak rollover / Supply lengthens / Relaxation on Asian market / Speculators liquidate their positions / First imports in sight / Is the market turning around?
03.05.2011
POLYMER PRICES
PET March 2011: Notations soar to dizzying all-time high / Producers improve margins / April cost situation still unclear / Hints of substitution suggest that the market may have found its price limit
04.04.2011
POLYMER PRICES
PET February 2011: Notations see triple-digit increase / Pressure from fibres boom continues to hold imports at bay / Supply tight / Strong demand for off-season / Further rises appear in store for March
02.03.2011
POLYMER PRICES
PET January 2011: Higher costs are passed down the chain / Brisk Asian demand for polyester fibre continues to pressure European market / No relaxation on the price front in store for February
02.02.2011
POLYMER PRICES
PET December 2010: Notations follow production costs upward / Low end of range pushed upward / Run on polyester in Asia drives prices across the globe / Supply tending tighter / Hikes likely this month
04.01.2011
POLYMER PRICES
PET November 2010: Asian fibre boom drives polyester prices / Packaging resins follow cost rise upward
02.12.2010
POLYMER PRICES
PET October 2010: Rising notations cover costs / Margins back to normal after dipping in September / Market more balanced in Europe / Fibre business booms in Asia / Upward price trend could continue
02.11.2010
POLYMER PRICES
PET September 2010: Rising PX feedstock nudges PET notations forward / Balanced supply and lively demand / Upward price momentum in Asia keeps imports down / Resins prices will follow cost movements again in October
04.10.2010
POLYMER PRICES
PET August 2010: Falling feedstocks PX and MEG push notations further downward / Imports slack / Current European output sufficient to supply stable demand / Moderate price upswing likely in September
02.09.2010
POLYMER PRICES
PET July 2010: Notations follow production costs downward / Feedstocks will continue to set the pace
03.08.2010
POLYMER PRICES
PET June 2010: Declining feedstock costs turn polymer price trend around / Notations start coming down as supply lengthens / European inventories full, Asian markets sour
02.07.2010
POLYMER PRICES
PET May 2010: Notations continue to rise / Absence of imports tightens supply / Seasonally good demand / Margins improve slightly despite higher costs, but producers still short of their target
02.06.2010
POLYMER PRICES
PET April 2010: Notations point sharply upward / Supply tight as season gets under way / Noticeable shortage of imports / Feedstocks relatively stable / Producers' margins improve / No relief from price hikes in May
04.05.2010
Seite 8 von 11
Topic search
Plastics Information Europe
  • Polymer Prices (6.537)
    • Petrochemicals (622)
    • Standard Thermoplastics (1.057)
    • PET (265)
    • Engineering Thermoplastics (273)
    • Recyclate (409)
      • General (6)
      • Standard Thermoplastics / Recyclate (201)
      • Engineering Thermoplastics / Recyclate (202)
    • Polyurethanes (266)
    • High Performance Polymers (2)
    • Composites (199)
    • Announcements (2.637)
    • World Regions (635)
      • China (326)
        • Standard Thermoplastics (164)
        • Engineering Thermoplastics (162)
      • North America (185)
      • Russia (124)
    • Spot Prices (142)
    • Forecasts (30)
  • Companies (37.285)
    • Polymer Materials (18.301)
      • Petrochemicals (3.332)
      • Charge (1.962)
        • General (102)
        • Masterbatches (347)
        • Additives (834)
        • Colours (402)
        • Reinforcements/Fillers (277)
      • Polymers (11.783)
        • General (760)
        • Standard Thermoplastics (4.092)
          • General (114)
          • Polyolefins (2.083)
          • Polystyrenes (366)
          • PVC (728)
          • Polyester (589)
          • Expandable (PS, PP, PE) (212)
        • Technical Thermoplastics (3.457)
          • General (354)
          • Styrene Copolymers (286)
          • PC/PMMA (492)
          • Polyamides (984)
          • POM/PBT/PP (341)
          • Technical Compounds (1.000)
        • PUR (834)
        • Other (2.640)
          • General (108)
          • Composites/Thermosets (420)
          • High Performance (661)
          • Biopolymers (726)
          • Elastomers/TPE (390)
          • Recyclate (335)
      • Distribution (1.224)
    • Machinery (1.148)
      • General (33)
      • Plant Construction (148)
      • Core Machines (771)
        • General (92)
        • Extrusion (184)
        • Injection Moulding (389)
        • Blow Moulding (73)
        • Foam (12)
        • PUR (17)
        • Compression Moulding (4)
      • Peripherals (190)
        • General (36)
        • Control Systems (4)
        • Automatisation (35)
        • Dies/Tools/Moulds (102)
        • Components (13)
      • Finishing (6)
    • Processing (7.632)
      • General (951)
      • Extrusion (2.476)
        • General (132)
        • Flexible Films (1.201)
        • Rigid Films/Sheet (398)
        • Pipes (367)
        • Profiles/Rods (265)
        • Other (113)
      • Injection Moulding (1.862)
      • Blow Moulding (555)
      • PUR (343)
      • Other (1.190)
        • General (137)
        • Foam (321)
        • Composites/Thermosets (365)
        • Thermoforming (234)
        • Rotational Moulding (36)
        • Additive Manufacturing (97)
      • Finishing (255)
    • Application (7.867)
      • General (147)
      • Packaging (3.391)
      • Construction (772)
      • Automotive / Transport (1.808)
      • Electrical Appliances (363)
      • Consumer Goods (726)
      • Medical (425)
      • Technical (235)
    • Other (2.337)
      • Recycling/Disposal (1.865)
      • Services (265)
      • Logistics (207)
  • Commercial Register (179)
    • Insolvency (173)
    • Changes (6)
  • Markets (25.504)
    • Polymer Materials (10.974)
      • Petrochemicals (2.709)
      • Charge (900)
        • General (43)
        • Masterbatches (100)
        • Additives (354)
        • Colours (166)
        • Reinforcements/Fillers (237)
      • Polymers (6.949)
        • General (913)
        • Standard Thermoplastics (2.610)
          • General (75)
          • Polyolefins (1.304)
          • Polystyrenes (171)
          • PVC (543)
          • Polyester (374)
          • Expandable (PS, PP, PE) (143)
        • Technical Thermoplastics (1.397)
          • General (92)
          • Styrene Copolymers (122)
          • PC/PMMA (168)
          • Polyamides (489)
          • POM/PBT/PP (118)
          • Technical Compounds (408)
        • PUR (490)
        • Other (1.539)
          • General (50)
          • Composites/Thermosets (309)
          • High Performance (319)
          • Biopolymers (446)
          • Elastomers/TPE (151)
          • Recyclate (264)
      • Other Materials (61)
      • Distribution (355)
    • Machinery (537)
      • General (134)
      • Plant Construction (15)
      • Core Machines (313)
        • General (119)
        • Extrusion (38)
        • Injection Moulding (133)
        • Blow Moulding (15)
        • PUR (6)
        • Compression Moulding (2)
      • Peripherals (75)
        • General (21)
        • Automatisation (18)
        • Dies/Tools/Moulds (36)
    • Processing (1.786)
      • General (488)
      • Extrusion (632)
        • General (20)
        • Flexible Films (308)
        • Rigid Films/Sheets (126)
        • Pipes (76)
        • Profiles/Rods (91)
        • Other (11)
      • Injection Moulding (183)
      • Blow Moulding (43)
      • PUR (84)
      • Other (311)
        • General (20)
        • Foam (82)
        • Composites/Thermosets (142)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (39)
      • Finishing (45)
    • Applications (4.531)
      • General (55)
      • Packaging (2.203)
      • Construction (360)
      • Automotive / Transport (1.050)
      • Electrical Appliances (238)
      • Consumer Goods (282)
      • Medical (218)
      • Technical (64)
      • Other (61)
    • Regions and Countries (4.274)
      • World (197)
      • German-speaking Countries (504)
      • Europe (2.109)
        • General (526)
        • Italy (152)
        • France (158)
        • Spain/Portugal (107)
        • Great Britain/Ireland (534)
        • Low Countries (75)
        • Central Europe (184)
        • Scandinavia (48)
        • Russia (119)
        • Eastern Europe (63)
        • Southeastern Europe (143)
      • North America (503)
      • Asia (684)
        • General (123)
        • China (394)
        • Japan (51)
        • Korea (28)
        • India (88)
      • Middle East (152)
      • Other (41)
      • South America (84)
    • Other (3.402)
      • Recycling/Disposal (2.389)
      • Economic Trend (573)
      • Services (44)
      • Logistics (307)
      • Energy (89)
  • Production and Engineering (3.886)
    • Polymer Materials (2.420)
      • Petrochemicals (66)
      • Charge (451)
        • General (15)
        • Masterbatches (116)
        • Additives (232)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.871)
        • General (32)
        • Standard Themoplastics (370)
        • Technical Thermoplastics (606)
          • General (20)
          • Styrene Copolymers (63)
          • PC/PMMA (64)
          • Polyamides (209)
          • POM/PBT/PP (69)
          • Technical Compounds (181)
        • PUR (76)
        • Other (787)
          • General (23)
          • Composites/Thermosets (108)
          • High Performance (163)
          • Biopolymers (255)
          • Elastomers/TPE (115)
          • Recyclate (123)
      • Other (32)
    • Machinery (95)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (32)
        • General (16)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (450)
      • Polymer Materials (146)
      • Technical (16)
      • Product Development (43)
      • Process (84)
      • Application (97)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (60)
    • New Products (881)
      • Packaging (578)
      • Construction (35)
      • Automotive / Transport (104)
      • Electrical Appliances (28)
      • Consumer Goods (51)
      • Medical (39)
      • Technical (8)
      • Other (38)
    • Other (40)
  • Management (866)
    • Purchasing (111)
    • General Management (216)
    • Company organisation (45)
    • Marketing/Sales (16)
    • Human Resources (8)
    • Finances (105)
    • Logistics (365)
  • People (1.521)
  • Industry (6.888)
    • General (1.328)
    • Associations/Institutions (2.608)
    • Legislation (1.565)
    • Environment / Health (1.377)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.205)
  • Plastic Fantastic (595)
  • Commentaries (90)
  • Interviews (170)
  • Notes by Publisher (85)
Energy Cost Surcharges
Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team
© 2026 by Plastics Information Europe, Bad Homburg
Date of print: 20/11/2026
Ref: f4fdq5kcthdx2qlwmzuasxnp
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?node=100038&page=8&pageid=302