www.pieweb.com

Polymer Prices PET

POLYMER PRICES
PET May 2014: Notations firm slightly / Cost stagnation and import pressure stabilise / Pausing before the next wave of overcapacities
04.06.2014
POLYMER PRICES
PET April 2014: Slight declines / PX costs stabilise / May could see a “calm before the storm” / Structural oversupply getting worse
06.05.2014
POLYMER PRICES
PET March 2014: Notations sink noticeably on the back of cost declines / Further deterioration likely / Global oversupply continues to dog the market
03.04.2014
POLYMER PRICES
PET February 2014: Notations still pointing down / Producers pass on only half the cost reduction / Tendency toward surplus / March likely to see further declines despite start of seasonal business
05.03.2014
POLYMER PRICES
PET January 2014: Initial rises give way to a rollover / Market characterised by oversupply / Notations remain under pressure / Recyclate prices stable
05.02.2014
POLYMER PRICES
PET December 2013: Notations slightly firmer / Stable cost situation / Import pressure lessens / Several new plants due to come on stream / Prices still likely to move sideways in January
06.01.2014
POLYMER PRICES
PET November 2013: Notations mimic downward cost trend / Global oversupply hits European markets / Stability in the month's second half / Ongoing market weakness
04.12.2013
POLYMER PRICES
PET October 2013: Notations follow decline in feedstock costs / Prices crumble across the globe / Market remains weak / Notations likely to continue dropping in November
05.11.2013
POLYMER PRICES
PET September 2013: Producers succeed in passing on costs / Market largely balanced and calm / Imports rise as Asian notations fall / Prices expected to drop in October
02.10.2013
POLYMER PRICES
PET August 2013: Moderate erosion despite firm input costs / Market balanced at weak level / Imports slack / Middle East crisis continues to drive costs
03.09.2013
POLYMER PRICES
PET July 2013: Notations lose a little more ground / Trend reversed over the month / Summer weather improves market balance / Buyers open their wallets again / Imports decline
02.08.2013
POLYMER PRICES
PET June 2013: Notations follow costs downward / Worldwide oversupply tendency / European demand clearly below seasonal expectations / New capacities pressure outlook further
02.07.2013
POLYMER PRICES
PET May 2013: Only sluggish movement in May / Unseasonably cold weather dampens demand / Capacity cuts slow to grip / PX rolls over / Downward potential for notations
04.06.2013
POLYMER PRICES
PET April 2013: Sinking costs pressure notations but slight uptick in demand stems the bleeding / Supply shrinks further / Producer margins improve / Sideward movement likely in May
03.05.2013
POLYMER PRICES
PET March 2013: Sinking feedstock costs pull polymers down further / Imports continue to swell supply / Strong resistance to buying / No change likely in April
03.04.2013
POLYMER PRICES
PET February 2013: Slight cost increases passed down the chain / With order volume slack, markets quiet / High price level encourages substitution / Outlook dim
04.03.2013
POLYMER PRICES
PET January 2013: Passing on cost rises still problematic / Global oversupply batters Europe / Cold weather further depresses slack off-season demand / Perspectives still dim
04.02.2013
POLYMER PRICES
PET December 2012: Notations stable / Cost burden eases slightly / Demand slack in line with the season / January production cost trend will be decisive
03.01.2013
POLYMER PRICES
PET November 2012: Producers strive to defend notations / Rollover the rule / Slight rebates for large accounts / Oversupply despite capacity cuts / Market likely to continue depressed in December
04.12.2012
POLYMER PRICES
PET October 2012: Market spirals down into slump / Hikes cover only higher costs / Demand hit by economic downtrend / Little improvement on the horizon / Consolidation looks likely
02.11.2012
POLYMER PRICES
PET September 2012: Producers fail to pass on all of higher feedstock bill / Further margin erosion / Demand slips as inventories widen / Threat of structural overcapacity
02.10.2012
POLYMER PRICES
PET August 2012: Bottle resins notations rise on higher input costs / Production still on a low flame / Asian imports scarce / Demand livens up / September certain to see further upward price momentum
04.09.2012
POLYMER PRICES
PET July 2012: Notations follow feedstock costs downward / Renewed oil price rise pushes polymer back up / Balanced market is buoyed by pre-buying / Hikes likely in August
02.08.2012
POLYMER PRICES
PET June 2012: Feedstock notations shed triple digits / May's downward trend continues / Abundance of material / Early summer months characterised by reluctance to buy / Will prices bottom out in July?
03.07.2012
POLYMER PRICES
PET May 2012: European notations tumble downward / Producers' margins move into the red / Euro's weakness depresses demand / Surplus despite production cuts / Price pressure will continue in June
04.06.2012
Seite 7 von 11
Topic search
Plastics Information Europe
  • Polymer Prices (6.537)
    • Petrochemicals (622)
    • Standard Thermoplastics (1.057)
    • PET (265)
    • Engineering Thermoplastics (273)
    • Recyclate (409)
      • General (6)
      • Standard Thermoplastics / Recyclate (201)
      • Engineering Thermoplastics / Recyclate (202)
    • Polyurethanes (266)
    • High Performance Polymers (2)
    • Composites (199)
    • Announcements (2.637)
    • World Regions (635)
      • China (326)
        • Standard Thermoplastics (164)
        • Engineering Thermoplastics (162)
      • North America (185)
      • Russia (124)
    • Spot Prices (142)
    • Forecasts (30)
  • Companies (37.285)
    • Polymer Materials (18.301)
      • Petrochemicals (3.332)
      • Charge (1.962)
        • General (102)
        • Masterbatches (347)
        • Additives (834)
        • Colours (402)
        • Reinforcements/Fillers (277)
      • Polymers (11.783)
        • General (760)
        • Standard Thermoplastics (4.092)
          • General (114)
          • Polyolefins (2.083)
          • Polystyrenes (366)
          • PVC (728)
          • Polyester (589)
          • Expandable (PS, PP, PE) (212)
        • Technical Thermoplastics (3.457)
          • General (354)
          • Styrene Copolymers (286)
          • PC/PMMA (492)
          • Polyamides (984)
          • POM/PBT/PP (341)
          • Technical Compounds (1.000)
        • PUR (834)
        • Other (2.640)
          • General (108)
          • Composites/Thermosets (420)
          • High Performance (661)
          • Biopolymers (726)
          • Elastomers/TPE (390)
          • Recyclate (335)
      • Distribution (1.224)
    • Machinery (1.148)
      • General (33)
      • Plant Construction (148)
      • Core Machines (771)
        • General (92)
        • Extrusion (184)
        • Injection Moulding (389)
        • Blow Moulding (73)
        • Foam (12)
        • PUR (17)
        • Compression Moulding (4)
      • Peripherals (190)
        • General (36)
        • Control Systems (4)
        • Automatisation (35)
        • Dies/Tools/Moulds (102)
        • Components (13)
      • Finishing (6)
    • Processing (7.632)
      • General (951)
      • Extrusion (2.476)
        • General (132)
        • Flexible Films (1.201)
        • Rigid Films/Sheet (398)
        • Pipes (367)
        • Profiles/Rods (265)
        • Other (113)
      • Injection Moulding (1.862)
      • Blow Moulding (555)
      • PUR (343)
      • Other (1.190)
        • General (137)
        • Foam (321)
        • Composites/Thermosets (365)
        • Thermoforming (234)
        • Rotational Moulding (36)
        • Additive Manufacturing (97)
      • Finishing (255)
    • Application (7.867)
      • General (147)
      • Packaging (3.391)
      • Construction (772)
      • Automotive / Transport (1.808)
      • Electrical Appliances (363)
      • Consumer Goods (726)
      • Medical (425)
      • Technical (235)
    • Other (2.337)
      • Recycling/Disposal (1.865)
      • Services (265)
      • Logistics (207)
  • Commercial Register (179)
    • Insolvency (173)
    • Changes (6)
  • Markets (25.504)
    • Polymer Materials (10.974)
      • Petrochemicals (2.709)
      • Charge (900)
        • General (43)
        • Masterbatches (100)
        • Additives (354)
        • Colours (166)
        • Reinforcements/Fillers (237)
      • Polymers (6.949)
        • General (913)
        • Standard Thermoplastics (2.610)
          • General (75)
          • Polyolefins (1.304)
          • Polystyrenes (171)
          • PVC (543)
          • Polyester (374)
          • Expandable (PS, PP, PE) (143)
        • Technical Thermoplastics (1.397)
          • General (92)
          • Styrene Copolymers (122)
          • PC/PMMA (168)
          • Polyamides (489)
          • POM/PBT/PP (118)
          • Technical Compounds (408)
        • PUR (490)
        • Other (1.539)
          • General (50)
          • Composites/Thermosets (309)
          • High Performance (319)
          • Biopolymers (446)
          • Elastomers/TPE (151)
          • Recyclate (264)
      • Other Materials (61)
      • Distribution (355)
    • Machinery (537)
      • General (134)
      • Plant Construction (15)
      • Core Machines (313)
        • General (119)
        • Extrusion (38)
        • Injection Moulding (133)
        • Blow Moulding (15)
        • PUR (6)
        • Compression Moulding (2)
      • Peripherals (75)
        • General (21)
        • Automatisation (18)
        • Dies/Tools/Moulds (36)
    • Processing (1.786)
      • General (488)
      • Extrusion (632)
        • General (20)
        • Flexible Films (308)
        • Rigid Films/Sheets (126)
        • Pipes (76)
        • Profiles/Rods (91)
        • Other (11)
      • Injection Moulding (183)
      • Blow Moulding (43)
      • PUR (84)
      • Other (311)
        • General (20)
        • Foam (82)
        • Composites/Thermosets (142)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (39)
      • Finishing (45)
    • Applications (4.531)
      • General (55)
      • Packaging (2.203)
      • Construction (360)
      • Automotive / Transport (1.050)
      • Electrical Appliances (238)
      • Consumer Goods (282)
      • Medical (218)
      • Technical (64)
      • Other (61)
    • Regions and Countries (4.274)
      • World (197)
      • German-speaking Countries (504)
      • Europe (2.109)
        • General (526)
        • Italy (152)
        • France (158)
        • Spain/Portugal (107)
        • Great Britain/Ireland (534)
        • Low Countries (75)
        • Central Europe (184)
        • Scandinavia (48)
        • Russia (119)
        • Eastern Europe (63)
        • Southeastern Europe (143)
      • North America (503)
      • Asia (684)
        • General (123)
        • China (394)
        • Japan (51)
        • Korea (28)
        • India (88)
      • Middle East (152)
      • Other (41)
      • South America (84)
    • Other (3.402)
      • Recycling/Disposal (2.389)
      • Economic Trend (573)
      • Services (44)
      • Logistics (307)
      • Energy (89)
  • Production and Engineering (3.886)
    • Polymer Materials (2.420)
      • Petrochemicals (66)
      • Charge (451)
        • General (15)
        • Masterbatches (116)
        • Additives (232)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.871)
        • General (32)
        • Standard Themoplastics (370)
        • Technical Thermoplastics (606)
          • General (20)
          • Styrene Copolymers (63)
          • PC/PMMA (64)
          • Polyamides (209)
          • POM/PBT/PP (69)
          • Technical Compounds (181)
        • PUR (76)
        • Other (787)
          • General (23)
          • Composites/Thermosets (108)
          • High Performance (163)
          • Biopolymers (255)
          • Elastomers/TPE (115)
          • Recyclate (123)
      • Other (32)
    • Machinery (95)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (32)
        • General (16)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (450)
      • Polymer Materials (146)
      • Technical (16)
      • Product Development (43)
      • Process (84)
      • Application (97)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (60)
    • New Products (881)
      • Packaging (578)
      • Construction (35)
      • Automotive / Transport (104)
      • Electrical Appliances (28)
      • Consumer Goods (51)
      • Medical (39)
      • Technical (8)
      • Other (38)
    • Other (40)
  • Management (866)
    • Purchasing (111)
    • General Management (216)
    • Company organisation (45)
    • Marketing/Sales (16)
    • Human Resources (8)
    • Finances (105)
    • Logistics (365)
  • People (1.521)
  • Industry (6.888)
    • General (1.328)
    • Associations/Institutions (2.608)
    • Legislation (1.565)
    • Environment / Health (1.377)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.205)
  • Plastic Fantastic (595)
  • Commentaries (90)
  • Interviews (170)
  • Notes by Publisher (85)
Energy Cost Surcharges
Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team
© 2026 by Plastics Information Europe, Bad Homburg
Date of print: 20/11/2026
Ref: aezdnwx4nyvf5xhiqmxsaied
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?node=100038&page=7&pageid=302