Show topic list

Polymer Prices PET

POLYMER PRICES PET June 2014: Slight increases / Cost mix rising / European output muted / Import pressure eases / Demand somewhat livelier / Prices likely to remain firm in July	03.07.2014
POLYMER PRICES PET May 2014: Notations firm slightly / Cost stagnation and import pressure stabilise / Pausing before the next wave of overcapacities	04.06.2014
POLYMER PRICES PET April 2014: Slight declines / PX costs stabilise / May could see a “calm before the storm” / Structural oversupply getting worse	06.05.2014
POLYMER PRICES PET March 2014: Notations sink noticeably on the back of cost declines / Further deterioration likely / Global oversupply continues to dog the market	03.04.2014
POLYMER PRICES PET February 2014: Notations still pointing down / Producers pass on only half the cost reduction / Tendency toward surplus / March likely to see further declines despite start of seasonal business	05.03.2014
POLYMER PRICES PET January 2014: Initial rises give way to a rollover / Market characterised by oversupply / Notations remain under pressure / Recyclate prices stable	05.02.2014
POLYMER PRICES PET December 2013: Notations slightly firmer / Stable cost situation / Import pressure lessens / Several new plants due to come on stream / Prices still likely to move sideways in January	06.01.2014
POLYMER PRICES PET November 2013: Notations mimic downward cost trend / Global oversupply hits European markets / Stability in the month's second half / Ongoing market weakness	04.12.2013
POLYMER PRICES PET October 2013: Notations follow decline in feedstock costs / Prices crumble across the globe / Market remains weak / Notations likely to continue dropping in November	05.11.2013
POLYMER PRICES PET September 2013: Producers succeed in passing on costs / Market largely balanced and calm / Imports rise as Asian notations fall / Prices expected to drop in October	02.10.2013
POLYMER PRICES PET August 2013: Moderate erosion despite firm input costs / Market balanced at weak level / Imports slack / Middle East crisis continues to drive costs	03.09.2013
POLYMER PRICES PET July 2013: Notations lose a little more ground / Trend reversed over the month / Summer weather improves market balance / Buyers open their wallets again / Imports decline	02.08.2013
POLYMER PRICES PET June 2013: Notations follow costs downward / Worldwide oversupply tendency / European demand clearly below seasonal expectations / New capacities pressure outlook further	02.07.2013
POLYMER PRICES PET May 2013: Only sluggish movement in May / Unseasonably cold weather dampens demand / Capacity cuts slow to grip / PX rolls over / Downward potential for notations	04.06.2013
POLYMER PRICES PET April 2013: Sinking costs pressure notations but slight uptick in demand stems the bleeding / Supply shrinks further / Producer margins improve / Sideward movement likely in May	03.05.2013
POLYMER PRICES PET March 2013: Sinking feedstock costs pull polymers down further / Imports continue to swell supply / Strong resistance to buying / No change likely in April	03.04.2013
POLYMER PRICES PET February 2013: Slight cost increases passed down the chain / With order volume slack, markets quiet / High price level encourages substitution / Outlook dim	04.03.2013
POLYMER PRICES PET January 2013: Passing on cost rises still problematic / Global oversupply batters Europe / Cold weather further depresses slack off-season demand / Perspectives still dim	04.02.2013
POLYMER PRICES PET December 2012: Notations stable / Cost burden eases slightly / Demand slack in line with the season / January production cost trend will be decisive	03.01.2013
POLYMER PRICES PET November 2012: Producers strive to defend notations / Rollover the rule / Slight rebates for large accounts / Oversupply despite capacity cuts / Market likely to continue depressed in December	04.12.2012
POLYMER PRICES PET October 2012: Market spirals down into slump / Hikes cover only higher costs / Demand hit by economic downtrend / Little improvement on the horizon / Consolidation looks likely	02.11.2012
POLYMER PRICES PET September 2012: Producers fail to pass on all of higher feedstock bill / Further margin erosion / Demand slips as inventories widen / Threat of structural overcapacity	02.10.2012
POLYMER PRICES PET August 2012: Bottle resins notations rise on higher input costs / Production still on a low flame / Asian imports scarce / Demand livens up / September certain to see further upward price momentum	04.09.2012
POLYMER PRICES PET July 2012: Notations follow feedstock costs downward / Renewed oil price rise pushes polymer back up / Balanced market is buoyed by pre-buying / Hikes likely in August	02.08.2012
POLYMER PRICES PET June 2012: Feedstock notations shed triple digits / May's downward trend continues / Abundance of material / Early summer months characterised by reluctance to buy / Will prices bottom out in July?	03.07.2012

Seite 6 von 10

Topic search

Plastics Information Europe

Polymer Prices (5.840)
- Petrochemicals (423)
- Standard Thermoplastics (920)
- PET (241)
- Engineering Thermoplastics (247)
- Recyclate (353)
  - Standard Thermoplastics / Recyclate (176)
  - Engineering Thermoplastics / Recyclate (177)
- Polyurethanes (239)
- High Performance Polymers (2)
- Composites (175)
- Announcements (2.556)
- World Regions (562)
  - China (278)
    - Standard Thermoplastics (140)
    - Engineering Thermoplastics (138)
  - North America (160)
  - Russia (124)
- Spot Prices (118)
- Forecasts (4)
Companies (33.214)
- Polymer Materials (16.458)
  - Petrochemicals (2.954)
  - Charge (1.798)
    - General (89)
    - Masterbatches (332)
    - Additives (749)
    - Colours (367)
    - Reinforcements/Fillers (261)
  - Polymers (10.576)
    - General (672)
    - Standard Thermoplastics (3.666)
      - General (113)
      - Polyolefins (1.858)
      - Polystyrenes (323)
      - PVC (641)
      - Polyester (544)
      - Expandable (PS, PP, PE) (187)
    - Technical Thermoplastics (3.123)
      - General (348)
      - Styrene Copolymers (251)
      - PC/PMMA (441)
      - Polyamides (858)
      - POM/PBT/PP (304)
      - Technical Compounds (921)
    - PUR (762)
    - Other (2.353)
      - General (100)
      - Composites/Thermosets (398)
      - High Performance (586)
      - Biopolymers (681)
      - Elastomers/TPE (356)
      - Recyclate (232)
  - Distribution (1.130)
- Machinery (1.063)
  - General (27)
  - Plant Construction (129)
  - Core Machines (730)
    - General (88)
    - Extrusion (176)
    - Injection Moulding (363)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (173)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (92)
    - Components (13)
  - Finishing (4)
- Processing (6.855)
  - General (857)
  - Extrusion (2.261)
    - General (112)
    - Flexible Films (1.089)
    - Rigid Films/Sheet (368)
    - Pipes (340)
    - Profiles/Rods (255)
    - Other (97)
  - Injection Moulding (1.643)
  - Blow Moulding (491)
  - PUR (285)
  - Other (1.085)
    - General (114)
    - Foam (302)
    - Composites/Thermosets (335)
    - Thermoforming (209)
    - Rotational Moulding (31)
    - Additive Manufacturing (94)
  - Finishing (233)
- Application (7.027)
  - General (125)
  - Packaging (3.033)
  - Construction (697)
  - Automotive / Transport (1.611)
  - Electrical Appliances (326)
  - Consumer Goods (653)
  - Medical (378)
  - Technical (204)
- Other (1.811)
  - Recycling/Disposal (1.463)
  - Services (248)
  - Logistics (100)
Commercial Register (110)
- Insolvency (105)
- Changes (5)
Markets (22.213)
- Polymer Materials (9.634)
  - Petrochemicals (2.340)
  - Charge (834)
    - General (38)
    - Masterbatches (90)
    - Additives (331)
    - Colours (153)
    - Reinforcements/Fillers (222)
  - Polymers (6.096)
    - General (718)
    - Standard Thermoplastics (2.343)
      - General (74)
      - Polyolefins (1.158)
      - Polystyrenes (154)
      - PVC (485)
      - Polyester (337)
      - Expandable (PS, PP, PE) (135)
    - Technical Thermoplastics (1.234)
      - General (87)
      - Styrene Copolymers (101)
      - PC/PMMA (145)
      - Polyamides (420)
      - POM/PBT/PP (106)
      - Technical Compounds (375)
    - PUR (442)
    - Other (1.359)
      - General (46)
      - Composites/Thermosets (287)
      - High Performance (293)
      - Biopolymers (420)
      - Elastomers/TPE (137)
      - Recyclate (176)
  - Other Materials (57)
  - Distribution (307)
- Machinery (501)
  - General (127)
  - Plant Construction (14)
  - Core Machines (289)
    - General (109)
    - Extrusion (36)
    - Injection Moulding (123)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.638)
  - General (403)
  - Extrusion (596)
    - General (20)
    - Flexible Films (290)
    - Rigid Films/Sheets (116)
    - Pipes (70)
    - Profiles/Rods (89)
    - Other (11)
  - Injection Moulding (176)
  - Blow Moulding (43)
  - PUR (77)
  - Other (299)
    - General (20)
    - Foam (77)
    - Composites/Thermosets (136)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (38)
  - Finishing (44)
- Applications (3.891)
  - General (37)
  - Packaging (1.872)
  - Construction (297)
  - Automotive / Transport (930)
  - Electrical Appliances (212)
  - Consumer Goods (243)
  - Medical (198)
  - Technical (56)
  - Other (46)
- Regions and Countries (4.015)
  - World (194)
  - German-speaking Countries (472)
  - Europe (1.943)
    - General (463)
    - Italy (142)
    - France (155)
    - Spain/Portugal (97)
    - Great Britain/Ireland (502)
    - Low Countries (74)
    - Central Europe (173)
    - Scandinavia (44)
    - Russia (107)
    - Eastern Europe (46)
    - Southeastern Europe (140)
  - North America (480)
  - Asia (667)
    - General (118)
    - China (389)
    - Japan (49)
    - Korea (26)
    - India (85)
  - Middle East (141)
  - Other (37)
  - South America (81)
- Other (2.534)
  - Recycling/Disposal (1.897)
  - Economic Trend (341)
  - Services (41)
  - Logistics (201)
  - Energy (54)
Production and Engineering (3.688)
- Polymer Materials (2.303)
  - Petrochemicals (55)
  - Charge (434)
    - General (13)
    - Masterbatches (111)
    - Additives (222)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.784)
    - General (29)
    - Standard Themoplastics (356)
    - Technical Thermoplastics (591)
      - General (19)
      - Styrene Copolymers (62)
      - PC/PMMA (62)
      - Polyamides (202)
      - POM/PBT/PP (66)
      - Technical Compounds (180)
    - PUR (69)
    - Other (739)
      - General (21)
      - Composites/Thermosets (106)
      - High Performance (159)
      - Biopolymers (238)
      - Elastomers/TPE (113)
      - Recyclate (102)
  - Other (30)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (420)
  - Polymer Materials (140)
  - Technical (13)
  - Product Development (40)
  - Process (81)
  - Application (89)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (53)
- New Products (833)
  - Packaging (546)
  - Construction (34)
  - Automotive / Transport (97)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (7)
  - Other (37)
- Other (38)
Management (634)
- Purchasing (100)
- General Management (136)
- Company organisation (43)
- Marketing/Sales (14)
- Human Resources (7)
- Finances (88)
- Logistics (246)
People (1.473)
Industry (5.721)
- General (1.135)
- Associations/Institutions (2.203)
- Legislation (1.205)
- Environment / Health (1.168)
- plas.TV - Plastics unite(d) (10)
Events (1.120)
Plastic Fantastic (521)
Commentaries (78)
Interviews (130)
Notes by Publisher (69)

More about

Artenius BP Cepsa DAK European Union Indorama JBF La Seda M&G M&G Polymers Neo Group Neogroup Novapet Octal OPEC Orlen Pagev

Daniel Stricker Yavuz Eroglu

Energy Cost Surcharges

Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team

Price survey methodology