www.pieweb.com

Polymer Prices PET

POLYMER PRICES
PET August 2022: Prices fall across the board / Strong imports ensure plentiful supply / Demand considerably below customary seasonal level / Producers curtail production / Uncertain outlook for autumn
02.09.2022
POLYMER PRICES
PET July 2022: Sharp hike for PX drives up prices / European production low / Customers cautious as uncertainty grips markets / Further increases likely
02.08.2022
POLYMER PRICES
PET June 2022: Seasonal demand clearly picking up / Higher feedstock costs raise prices / Attractive imports boost supply / Further increases expected in July
04.07.2022
POLYMER PRICES
PET May 2022: Quotations plummet / Demand very weak in traditional peak period / Significant imports arrive / Producers' stocks fill up / Sluggish demand likely to continue in June
02.06.2022
POLYMER PRICES
PET April 2022: Prices surprisingly stable / Seasonal demand well below expectations / Supply situation adequate / Imports due to arrive soon / Uncertainties dominate the market / Price pressure in May
03.05.2022
POLYMER PRICES
PET March 2022: Unique situation as pandemic, war boosts prices / Start of spring, tight supply situation cause run on resin / Little change likely in April
04.04.2022
POLYMER PRICES
PET February 2022: Upward pressure increases / Supply situation tightens / Pre-seasonal rise in demand / Ukraine war casts pall / Price hikes coming
02.03.2022
POLYMER PRICES
PET January 2022: Varied picture at start of year / The smaller the purchase volumes, the lower the hikes / Supply stabilises / Reluctance to purchase in anticipation of falling prices in spring
02.02.2022
POLYMER PRICES
PET December 2021: Notations increase again / A very quiet end of year keeps high demands in check / Signs of a turnaround on world markets / Increased imports in sight again
04.01.2022
POLYMER PRICES
PET November 2021: Brief respite at the beginning of the month gives way to panic due to new coronavirus variant / Gaping emptiness in supply / Spot prices already exploding / Contracts could follow suit
02.12.2021
POLYMER PRICES
PET October 2021: Cost of raw materials and energy causes sharp rise in prices / Supply set to be extremely tight / Hedging purchases predominate as of mid-month / No improvement in sight
02.11.2021
POLYMER PRICES
PET September 2021: Picture dominated by moderate increases / Subdued supply with an unexpected pickup in demand / Rising cost pressure due to high energy prices brings uncertainty for October
04.10.2021
POLYMER PRICES
PET August 2021: Gloomy weather, gloomy mood / PX cost increase factored in due to lack of other impulses / Feeble hope of revival in food and catering sector in September
02.09.2021
POLYMER PRICES
PET July 2021: Only slight corrections to pricing / Rising petrochemical costs keep reductions in check / Demand still below expectations / Upward price pressure set for clear increase in August
03.08.2021
POLYMER PRICES
PET June 2021: Notations undergo moderate fall / Revival in demand still short of expectations / Production in Europe running smoothly again / Imports still very thin / Stability expected in July
02.07.2021
POLYMER PRICES
PET May 2021: Price increases coming to an end / Record rates already trimmed / Production situation improves / Demand remains slack due to weather / Across-the-board reductions seem possible in June
02.06.2021
POLYMER PRICES
PET April 2021: Notations clearly rising / Market tightening continues / Very poor availability of PTA feedstock / Imports still absent / Demand lull preventing worsening of situation
04.05.2021
POLYMER PRICES
PET March 2021: European prices skyrocket / PTA outage in Belgium severely reduces availability as bottle season begins / Imports still scarce / Distinct hikes continue worldwide
06.04.2021
POLYMER PRICES
PET February 2021: Prices rise significantly on global turbulence in petrochemical industry / Still no imports / Producers secure margin improvements / Further increases almost inevitable
02.03.2021
TURKEY
Plastics association proposes solutions to surging resin prices / Domestic producers should sell to local processors / Calls for pausing import duties
10.02.2021
POLYMER PRICES
PET January 2021: Rising feedstock costs push prices up significantly / Import situation still tense due to high costs / Further hikes possible despite weak demand
02.02.2021
POLYMER PRICES
PET December 2020: Notations remain unchanged in slack environment / Imports still thin on the ground / Disappointing demand as pandemic flares up again / Firming of precursor products could drive prices in January
05.01.2021
POLYMER PRICES
PET November 2020: Prices carried over without much discussion / High freight charges slow down imports from Asia / Demand somewhat livelier than before / A year plagued by troubles draws to a quiet conclusion
02.12.2020
POLYMER PRICES
PET October 2020: Notations slightly firmer despite weak demand due to pandemic / Supply trending low / Price pressure still prevails / Plants restarting after maintenance
03.11.2020
POLYMER PRICES
PET September 2020: Prices plunge surprisingly heavily / Second Covid-19 wave depresses demand / Consequences of US hurricane season stabilise in the second half of the month / Minor consolidation in sight
02.10.2020
Seite 3 von 11
Topic search
Plastics Information Europe
  • Polymer Prices (6.537)
    • Petrochemicals (622)
    • Standard Thermoplastics (1.057)
    • PET (265)
    • Engineering Thermoplastics (273)
    • Recyclate (409)
      • General (6)
      • Standard Thermoplastics / Recyclate (201)
      • Engineering Thermoplastics / Recyclate (202)
    • Polyurethanes (266)
    • High Performance Polymers (2)
    • Composites (199)
    • Announcements (2.637)
    • World Regions (635)
      • China (326)
        • Standard Thermoplastics (164)
        • Engineering Thermoplastics (162)
      • North America (185)
      • Russia (124)
    • Spot Prices (142)
    • Forecasts (30)
  • Companies (37.285)
    • Polymer Materials (18.301)
      • Petrochemicals (3.332)
      • Charge (1.962)
        • General (102)
        • Masterbatches (347)
        • Additives (834)
        • Colours (402)
        • Reinforcements/Fillers (277)
      • Polymers (11.783)
        • General (760)
        • Standard Thermoplastics (4.092)
          • General (114)
          • Polyolefins (2.083)
          • Polystyrenes (366)
          • PVC (728)
          • Polyester (589)
          • Expandable (PS, PP, PE) (212)
        • Technical Thermoplastics (3.457)
          • General (354)
          • Styrene Copolymers (286)
          • PC/PMMA (492)
          • Polyamides (984)
          • POM/PBT/PP (341)
          • Technical Compounds (1.000)
        • PUR (834)
        • Other (2.640)
          • General (108)
          • Composites/Thermosets (420)
          • High Performance (661)
          • Biopolymers (726)
          • Elastomers/TPE (390)
          • Recyclate (335)
      • Distribution (1.224)
    • Machinery (1.148)
      • General (33)
      • Plant Construction (148)
      • Core Machines (771)
        • General (92)
        • Extrusion (184)
        • Injection Moulding (389)
        • Blow Moulding (73)
        • Foam (12)
        • PUR (17)
        • Compression Moulding (4)
      • Peripherals (190)
        • General (36)
        • Control Systems (4)
        • Automatisation (35)
        • Dies/Tools/Moulds (102)
        • Components (13)
      • Finishing (6)
    • Processing (7.632)
      • General (951)
      • Extrusion (2.476)
        • General (132)
        • Flexible Films (1.201)
        • Rigid Films/Sheet (398)
        • Pipes (367)
        • Profiles/Rods (265)
        • Other (113)
      • Injection Moulding (1.862)
      • Blow Moulding (555)
      • PUR (343)
      • Other (1.190)
        • General (137)
        • Foam (321)
        • Composites/Thermosets (365)
        • Thermoforming (234)
        • Rotational Moulding (36)
        • Additive Manufacturing (97)
      • Finishing (255)
    • Application (7.867)
      • General (147)
      • Packaging (3.391)
      • Construction (772)
      • Automotive / Transport (1.808)
      • Electrical Appliances (363)
      • Consumer Goods (726)
      • Medical (425)
      • Technical (235)
    • Other (2.337)
      • Recycling/Disposal (1.865)
      • Services (265)
      • Logistics (207)
  • Commercial Register (179)
    • Insolvency (173)
    • Changes (6)
  • Markets (25.504)
    • Polymer Materials (10.974)
      • Petrochemicals (2.709)
      • Charge (900)
        • General (43)
        • Masterbatches (100)
        • Additives (354)
        • Colours (166)
        • Reinforcements/Fillers (237)
      • Polymers (6.949)
        • General (913)
        • Standard Thermoplastics (2.610)
          • General (75)
          • Polyolefins (1.304)
          • Polystyrenes (171)
          • PVC (543)
          • Polyester (374)
          • Expandable (PS, PP, PE) (143)
        • Technical Thermoplastics (1.397)
          • General (92)
          • Styrene Copolymers (122)
          • PC/PMMA (168)
          • Polyamides (489)
          • POM/PBT/PP (118)
          • Technical Compounds (408)
        • PUR (490)
        • Other (1.539)
          • General (50)
          • Composites/Thermosets (309)
          • High Performance (319)
          • Biopolymers (446)
          • Elastomers/TPE (151)
          • Recyclate (264)
      • Other Materials (61)
      • Distribution (355)
    • Machinery (537)
      • General (134)
      • Plant Construction (15)
      • Core Machines (313)
        • General (119)
        • Extrusion (38)
        • Injection Moulding (133)
        • Blow Moulding (15)
        • PUR (6)
        • Compression Moulding (2)
      • Peripherals (75)
        • General (21)
        • Automatisation (18)
        • Dies/Tools/Moulds (36)
    • Processing (1.786)
      • General (488)
      • Extrusion (632)
        • General (20)
        • Flexible Films (308)
        • Rigid Films/Sheets (126)
        • Pipes (76)
        • Profiles/Rods (91)
        • Other (11)
      • Injection Moulding (183)
      • Blow Moulding (43)
      • PUR (84)
      • Other (311)
        • General (20)
        • Foam (82)
        • Composites/Thermosets (142)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (39)
      • Finishing (45)
    • Applications (4.531)
      • General (55)
      • Packaging (2.203)
      • Construction (360)
      • Automotive / Transport (1.050)
      • Electrical Appliances (238)
      • Consumer Goods (282)
      • Medical (218)
      • Technical (64)
      • Other (61)
    • Regions and Countries (4.274)
      • World (197)
      • German-speaking Countries (504)
      • Europe (2.109)
        • General (526)
        • Italy (152)
        • France (158)
        • Spain/Portugal (107)
        • Great Britain/Ireland (534)
        • Low Countries (75)
        • Central Europe (184)
        • Scandinavia (48)
        • Russia (119)
        • Eastern Europe (63)
        • Southeastern Europe (143)
      • North America (503)
      • Asia (684)
        • General (123)
        • China (394)
        • Japan (51)
        • Korea (28)
        • India (88)
      • Middle East (152)
      • Other (41)
      • South America (84)
    • Other (3.402)
      • Recycling/Disposal (2.389)
      • Economic Trend (573)
      • Services (44)
      • Logistics (307)
      • Energy (89)
  • Production and Engineering (3.886)
    • Polymer Materials (2.420)
      • Petrochemicals (66)
      • Charge (451)
        • General (15)
        • Masterbatches (116)
        • Additives (232)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.871)
        • General (32)
        • Standard Themoplastics (370)
        • Technical Thermoplastics (606)
          • General (20)
          • Styrene Copolymers (63)
          • PC/PMMA (64)
          • Polyamides (209)
          • POM/PBT/PP (69)
          • Technical Compounds (181)
        • PUR (76)
        • Other (787)
          • General (23)
          • Composites/Thermosets (108)
          • High Performance (163)
          • Biopolymers (255)
          • Elastomers/TPE (115)
          • Recyclate (123)
      • Other (32)
    • Machinery (95)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (32)
        • General (16)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (450)
      • Polymer Materials (146)
      • Technical (16)
      • Product Development (43)
      • Process (84)
      • Application (97)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (60)
    • New Products (881)
      • Packaging (578)
      • Construction (35)
      • Automotive / Transport (104)
      • Electrical Appliances (28)
      • Consumer Goods (51)
      • Medical (39)
      • Technical (8)
      • Other (38)
    • Other (40)
  • Management (866)
    • Purchasing (111)
    • General Management (216)
    • Company organisation (45)
    • Marketing/Sales (16)
    • Human Resources (8)
    • Finances (105)
    • Logistics (365)
  • People (1.521)
  • Industry (6.888)
    • General (1.328)
    • Associations/Institutions (2.608)
    • Legislation (1.565)
    • Environment / Health (1.377)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.205)
  • Plastic Fantastic (595)
  • Commentaries (90)
  • Interviews (170)
  • Notes by Publisher (85)
Energy Cost Surcharges
Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team
© 2026 by Plastics Information Europe, Bad Homburg
Date of print: 20/11/2026
Ref: 2wmrdyjk2e5niqtepde1d3xw
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?node=100038&page=3&pageid=302