Show topic list

Polymer Prices PET

POLYMER PRICES PET November 2006: Downhill all the way / Firming tendency seen at month´s end	05.12.2006
POLYMER PRICES PET October 2006: Downward trend for PX pressures packaging resins / Merchant pricing plummets	03.11.2006
POLYMER PRICES PET September 2006: Prices continue upward / Peak in sight? / Trend may be pointing downward	05.10.2006
POLYMER PRICES PET August 2006: Feedstock costs push polymer numbers higher / More hikes in sight for September	05.09.2006
POLYMER PRICES PET July 2006 / European heat wave leads to buoyant demand / Uneven development expected in August	03.08.2006
POLYMER PRICES PET June 2006: Consolidation of price levels / Margins still inadequate / Hikes in store for July	05.07.2006
POLYMER PRICES PET May 2006: Rising demand plus increasing feedstock costs force European prices upward / Producers say margins still inadequate / Further increases on the horizon for June	07.06.2006
POLYMER PRICES PET April 2006: European bottle season gets under way / Supplies becomes tighter / Raw material and energy costs take off / Outlook: Price increases	04.05.2006
POLYMER PRICES PET March 2006: Still no clear direction / Pressure from soft demand and long supplies continues	05.04.2006
POLYMER PRICES PET February: Roller coaster ride continues / Price gains in Europe / Converters well supplied	28.02.2006
POLYMER PRICES PET sees unexpected price gains in February	17.02.2006
POLYMER PRICES PET January: Notations lose ground in most of the world / Bleak outlook for first half of 2006 / Surplus capacity likely to remain a big problem / Asia-Pacific more than ever a key factor	16.02.2006
POLYMER PRICES PET December: Restored US production and lacklustre demand send prices downward / European consumption disappoints / US prices move back to pre-hurricane levels / Asian market eases, too	05.01.2006
POLYMER PRICES PET November: Notations fall slightly on the back of soft European demand / Scant hope of a rollover / Hurricanes drive US prices to record high / Asian numbers suffer from overcapacities	01.12.2005
POLYMER PRICES PET in October: Notations soar on the back of hurricanes / Prices varied wildly, with the broadest seen in Germany / Impressive increases in South America / Asians are gearing up for hikes	20.10.2005
POLYMER PRICES PET in September: “Katrina” feedstock squeeze pushes resins / Little European price movement	22.09.2005
POLYMER PRICES PET August: Prices bottom out / Gradual move upward / Higher demand in eastern Europe	25.08.2005
POLYMER PRICES PET July: Negative trend accelerates in June / Producers trying feverishly to get prices up	28.07.2005
POLYMER PRICES PET in June: Prices on the decline / Cool weather dampens demand / Asia depresses world mood	30.06.2005
POLYMER PRICES PET in May: Demand for bottle grade sees no significant seasonal upturn / Attempts to put through European hikes have failed / Declines or rollover in some segments / Stagnation in North America	02.06.2005
POLYMER PRICES PET in April: Slow start to the season / Long inventories and flat prices / Players see European hikes of EUR 50/t at the most for bottle resin / North American market more upbeat	21.04.2005
POLYMER PRICES PET in March: Upward trend continues / Demand for packaging grade in Q1 poorer than in the previous year / European customers tolerate higher prices within reason / MEG and PTA higher	24.03.2005
POLYMER PRICES PET February: Trend points upward / Expensive feedstock push notations higher / Demand for film grade holds steady / Asian exports to Europe boom / MTA and QTA as cheaper alternative to PTA	24.02.2005
POLYMER PRICES PET January: Market in flux / Spot notations point downward in first half of the month / Sellers believe the trend is only temporary / Western and eastern European markets start to converge	27.01.2005
POLYMER PRICES Follow-up: PET end of September / Increases pushed through / Further rises on the horizon	14.10.2004

Seite 10 von 10

Topic search

Plastics Information Europe

Polymer Prices (6.092)
- Petrochemicals (499)
- Standard Thermoplastics (971)
- PET (250)
- Engineering Thermoplastics (257)
- Recyclate (374)
  - General (3)
  - Standard Thermoplastics / Recyclate (185)
  - Engineering Thermoplastics / Recyclate (186)
- Polyurethanes (248)
- High Performance Polymers (2)
- Composites (184)
- Announcements (2.577)
- World Regions (589)
  - China (296)
    - Standard Thermoplastics (149)
    - Engineering Thermoplastics (147)
  - North America (169)
  - Russia (124)
- Spot Prices (127)
- Forecasts (14)
Companies (34.808)
- Polymer Materials (17.191)
  - Petrochemicals (3.104)
  - Charge (1.859)
    - General (89)
    - Masterbatches (340)
    - Additives (779)
    - Colours (382)
    - Reinforcements/Fillers (269)
  - Polymers (11.059)
    - General (716)
    - Standard Thermoplastics (3.831)
      - General (113)
      - Polyolefins (1.947)
      - Polystyrenes (340)
      - PVC (669)
      - Polyester (563)
      - Expandable (PS, PP, PE) (199)
    - Technical Thermoplastics (3.258)
      - General (349)
      - Styrene Copolymers (261)
      - PC/PMMA (463)
      - Polyamides (905)
      - POM/PBT/PP (319)
      - Technical Compounds (961)
    - PUR (790)
    - Other (2.464)
      - General (101)
      - Composites/Thermosets (411)
      - High Performance (615)
      - Biopolymers (700)
      - Elastomers/TPE (370)
      - Recyclate (267)
  - Distribution (1.169)
- Machinery (1.089)
  - General (28)
  - Plant Construction (139)
  - Core Machines (743)
    - General (90)
    - Extrusion (181)
    - Injection Moulding (369)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (174)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (93)
    - Components (13)
  - Finishing (5)
- Processing (7.167)
  - General (897)
  - Extrusion (2.351)
    - General (123)
    - Flexible Films (1.133)
    - Rigid Films/Sheet (383)
    - Pipes (350)
    - Profiles/Rods (258)
    - Other (104)
  - Injection Moulding (1.727)
  - Blow Moulding (518)
  - PUR (311)
  - Other (1.125)
    - General (120)
    - Foam (306)
    - Composites/Thermosets (352)
    - Thermoforming (218)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (238)
- Application (7.355)
  - General (129)
  - Packaging (3.177)
  - Construction (728)
  - Automotive / Transport (1.688)
  - Electrical Appliances (337)
  - Consumer Goods (681)
  - Medical (401)
  - Technical (214)
- Other (2.006)
  - Recycling/Disposal (1.611)
  - Services (255)
  - Logistics (140)
Commercial Register (129)
- Insolvency (124)
- Changes (5)
Markets (23.517)
- Polymer Materials (10.164)
  - Petrochemicals (2.495)
  - Charge (862)
    - General (38)
    - Masterbatches (95)
    - Additives (341)
    - Colours (158)
    - Reinforcements/Fillers (230)
  - Polymers (6.422)
    - General (803)
    - Standard Thermoplastics (2.448)
      - General (74)
      - Polyolefins (1.219)
      - Polystyrenes (158)
      - PVC (505)
      - Polyester (351)
      - Expandable (PS, PP, PE) (141)
    - Technical Thermoplastics (1.287)
      - General (87)
      - Styrene Copolymers (108)
      - PC/PMMA (154)
      - Polyamides (442)
      - POM/PBT/PP (110)
      - Technical Compounds (386)
    - PUR (461)
    - Other (1.423)
      - General (47)
      - Composites/Thermosets (296)
      - High Performance (303)
      - Biopolymers (432)
      - Elastomers/TPE (141)
      - Recyclate (204)
  - Other Materials (59)
  - Distribution (326)
- Machinery (508)
  - General (129)
  - Plant Construction (14)
  - Core Machines (294)
    - General (111)
    - Extrusion (37)
    - Injection Moulding (125)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.710)
  - General (436)
  - Extrusion (619)
    - General (20)
    - Flexible Films (299)
    - Rigid Films/Sheets (125)
    - Pipes (74)
    - Profiles/Rods (90)
    - Other (11)
  - Injection Moulding (179)
  - Blow Moulding (43)
  - PUR (81)
  - Other (307)
    - General (20)
    - Foam (80)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.128)
  - General (44)
  - Packaging (1.996)
  - Construction (317)
  - Automotive / Transport (976)
  - Electrical Appliances (220)
  - Consumer Goods (256)
  - Medical (207)
  - Technical (60)
  - Other (52)
- Regions and Countries (4.118)
  - World (195)
  - German-speaking Countries (486)
  - Europe (2.002)
    - General (487)
    - Italy (144)
    - France (155)
    - Spain/Portugal (100)
    - Great Britain/Ireland (511)
    - Low Countries (74)
    - Central Europe (179)
    - Scandinavia (46)
    - Russia (111)
    - Eastern Europe (54)
    - Southeastern Europe (141)
  - North America (492)
  - Asia (680)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (27)
    - India (87)
  - Middle East (143)
  - Other (39)
  - South America (81)
- Other (2.889)
  - Recycling/Disposal (2.094)
  - Economic Trend (443)
  - Services (41)
  - Logistics (240)
  - Energy (71)
Production and Engineering (3.783)
- Polymer Materials (2.359)
  - Petrochemicals (60)
  - Charge (441)
    - General (14)
    - Masterbatches (112)
    - Additives (227)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.827)
    - General (30)
    - Standard Themoplastics (364)
    - Technical Thermoplastics (601)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (206)
      - POM/PBT/PP (69)
      - Technical Compounds (180)
    - PUR (72)
    - Other (760)
      - General (21)
      - Composites/Thermosets (108)
      - High Performance (160)
      - Biopolymers (247)
      - Elastomers/TPE (114)
      - Recyclate (110)
  - Other (31)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (433)
  - Polymer Materials (144)
  - Technical (14)
  - Product Development (41)
  - Process (82)
  - Application (90)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (858)
  - Packaging (566)
  - Construction (35)
  - Automotive / Transport (99)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (8)
  - Other (38)
- Other (39)
Management (727)
- Purchasing (104)
- General Management (166)
- Company organisation (44)
- Marketing/Sales (15)
- Human Resources (7)
- Finances (96)
- Logistics (295)
People (1.498)
Industry (6.222)
- General (1.220)
- Associations/Institutions (2.374)
- Legislation (1.349)
- Environment / Health (1.269)
- plas.TV - Plastics unite(d) (10)
Events (1.152)
Plastic Fantastic (552)
Commentaries (83)
Interviews (143)
Notes by Publisher (72)

More about

Artenius BP Cepsa DAK European Union Indorama JBF La Seda M&G M&G Polymers Neo Group Neogroup Novapet Octal OPEC Orlen Pagev

Yavuz Eroglu

Energy Cost Surcharges

Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team

Price survey methodology