Show topic list

Polymer Prices Standard Thermoplastics

POLYMER PRICES Standard Thermoplastics PVC September 2013: Base material goes up slightly more than feedstocks / Compounds increase due to more expensive additives / Crumbling prices likely in October	03.10.2013
CORRECTION - POLYMER PRICES Standard Thermoplastics PE September 2013: Producers succeed in passing on increased costs / Attempts at margin improvements fail / Renewed fall in ethylene notation puts pressure on prices / Tough battles likely	03.10.2013
POLYMER PRICES Standard Thermoplastics PP September 2013: Propylene hike drives prices higher / Producers fail to secure more than the cost rise / General reluctance to buy / Prices likely to drop in October	03.10.2013
POLYMER PRICES Standard Thermoplastics Styrenics September 2013: Passing on of SM costs drives PS and EPS to record heights / Processors buy only bare minimum / ABS prices rise slightly / Imminent price correction	03.10.2013
POLYMER PRICES Standard Thermoplastics Trend September 2013: Polyolefin rise held to cost increase / PVC and styrenics with slightly more momentum / No across-the-board easing / Only PE tending weaker	13.09.2013
POLYMER PRICES Standard Thermoplastics August 2013: Notations rise on a broad front and exceed costs / Demand in summer holiday season driven by pre-buying / Substantial increases likely in September	04.09.2013
POLYMER PRICES Standard Thermoplastics PVC August 2013: Base material hikes exceed monomer rise / Blending components drive compounds higher / Price momentum could pick up in September	04.09.2013
POLYMER PRICES Standard Thermoplastics Trend August 2013: Hikes overcompensate cost rise / Supply limited by production cuts and outages / Demand strong for a summer month / Prices could climb further	13.08.2013
POLYMER PRICES Standard Thermoplastics July 2013: All products rise despite stagnating costs / Market tight due to poor supply and normal demand / Monomer-plus-margin strategy drives calls for hikes	05.08.2013
POLYMER PRICES Standard Thermoplastics PVC July 2013: Notations surprisingly on the rise / Producers push through margin improvements / Market situation tightens / Cost surge fuels new demands	05.08.2013
POLYMER PRICES Standard Thermoplastics Trend July 2013: Moderate increases for most products / Sharp output cuts / Demand still sluggish / Rising crude oil notations support producer hike plans	12.07.2013
POLYMER PRICES Standard Thermoplastics June 2013: Margin improvement for PE smaller than hoped / Monomer boosts PP, PS and EPS / Tightness despite weak demand / Costs stable / More hikes ahead	03.07.2013
POLYMER PRICES Standard Thermoplastics PVC June 2013: Margins on S-PVC improve less than hoped / Blends rise on higher matrix / Paste rolls over / Hikes sought despite lower cost base	03.07.2013
POLYMER PRICES Standard Thermoplastics Trend June 2013: Producers push for margin improvement / Tighter supply supports plans for PE hikes / Other polymers moving higher / Demand still below expectations	14.06.2013
POLYMER PRICES Standard Thermoplastics May 2013: Producers hang onto some of their cost relief / Hopes of turnaround unfulfilled / Bottoming out points the way to balanced market / Hikes in June likely	05.06.2013
POLYMER PRICES Standard Thermoplastics PVC May 2013: Large percentage of cost reductions passed on / Plasticised compounds strong downward adjustment / Paste prices also falling / Consolidation in June	05.06.2013
POLYMER PRICES Standard Thermoplastics Trend May 2013: Naphtha rise not enough to trigger a run / Demand still modest / Ongoing battle for share of cost relief / No Turnaround in sight	14.05.2013
POLYMER PRICES Standard Thermoplastics April 2013: PE producers forced to pass on full cost reduction / PP holds up better / PVC and PS buyers also see price cuts / Rising trend in May possible	06.05.2013
POLYMER PRICES Standard Thermoplastics PVC April 2013: Most of ethylene decline is passed on for base grades / Plasticiser rebates pressure some products / Pastes hold up / Falling notations certain in May	06.05.2013
POLYMER PRICES Standard Thermoplastics Trend April 2013: Producers hold onto half of cost reductions / Falling naphtha strengthens converters' waiting game / Intensity of demand revival will decide further developments	15.04.2013
POLYMER PRICES Standard Thermoplastics in March 2013: Producers find it hard to pass on costs / Cold weather, soft markets and reluctant buyers dash hike hopes / Cost reduction and rising demand jockey for position in April	04.04.2013
POLYMER PRICES Standard Thermoplastics PVC March 2013: Deep freeze in building sector allows only minimal cost pass-through for S-PVC base / Rising plasticiser prices drive S-PVC (P) compounds / April picture dominated by rollover, despite falling ethylene notation	04.04.2013
POLYMER PRICES Standard Thermoplastics Trend March 2013: Falling costs upstream dash producers' hopes of triple-digit hikes / Polyolefins rise less than costs / Higher input prices added to PVC, PS and EPS / Supply in line with demand	14.03.2013
POLYMER PRICES Standard Thermoplastics PVC February 2013: Minor increases for base polymer / Additives stable / Paste grade flat / Weak building demand pressures / Pronounced upswing expected in spring	05.03.2013
POLYMER PRICES Standard Thermoplastics in February 2013: Most notations show little change / PE largely rolls over / PP and PVC up slightly / PS and EPS slightly softer / Demand slack / Upturn likely in March	05.03.2013

Seite 33 von 42

Topic search

Plastics Information Europe

Polymer Prices (6.431)
- Petrochemicals (591)
- Standard Thermoplastics (1.035)
- PET (261)
- Engineering Thermoplastics (269)
- Recyclate (401)
  - General (6)
  - Standard Thermoplastics / Recyclate (197)
  - Engineering Thermoplastics / Recyclate (198)
- Polyurethanes (262)
- High Performance Polymers (2)
- Composites (195)
- Announcements (2.628)
- World Regions (623)
  - China (318)
    - Standard Thermoplastics (160)
    - Engineering Thermoplastics (158)
  - North America (181)
  - Russia (124)
- Spot Prices (138)
- Forecasts (26)
Companies (36.668)
- Polymer Materials (18.049)
  - Petrochemicals (3.279)
  - Charge (1.938)
    - General (100)
    - Masterbatches (344)
    - Additives (818)
    - Colours (400)
    - Reinforcements/Fillers (276)
  - Polymers (11.620)
    - General (751)
    - Standard Thermoplastics (4.037)
      - General (114)
      - Polyolefins (2.053)
      - Polystyrenes (363)
      - PVC (712)
      - Polyester (585)
      - Expandable (PS, PP, PE) (210)
    - Technical Thermoplastics (3.412)
      - General (353)
      - Styrene Copolymers (280)
      - PC/PMMA (485)
      - Polyamides (969)
      - POM/PBT/PP (334)
      - Technical Compounds (991)
    - PUR (822)
    - Other (2.598)
      - General (105)
      - Composites/Thermosets (417)
      - High Performance (653)
      - Biopolymers (719)
      - Elastomers/TPE (385)
      - Recyclate (319)
  - Distribution (1.212)
- Machinery (1.134)
  - General (32)
  - Plant Construction (146)
  - Core Machines (764)
    - General (92)
    - Extrusion (183)
    - Injection Moulding (384)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (186)
    - General (35)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (100)
    - Components (13)
  - Finishing (6)
- Processing (7.511)
  - General (941)
  - Extrusion (2.440)
    - General (131)
    - Flexible Films (1.183)
    - Rigid Films/Sheet (394)
    - Pipes (360)
    - Profiles/Rods (264)
    - Other (108)
  - Injection Moulding (1.827)
  - Blow Moulding (543)
  - PUR (338)
  - Other (1.172)
    - General (133)
    - Foam (317)
    - Composites/Thermosets (361)
    - Thermoforming (231)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (250)
- Application (7.719)
  - General (141)
  - Packaging (3.333)
  - Construction (759)
  - Automotive / Transport (1.776)
  - Electrical Appliances (355)
  - Consumer Goods (711)
  - Medical (418)
  - Technical (226)
- Other (2.255)
  - Recycling/Disposal (1.802)
  - Services (263)
  - Logistics (190)
Commercial Register (169)
- Insolvency (163)
- Changes (6)
Markets (25.090)
- Polymer Materials (10.811)
  - Petrochemicals (2.665)
  - Charge (892)
    - General (41)
    - Masterbatches (100)
    - Additives (350)
    - Colours (165)
    - Reinforcements/Fillers (236)
  - Polymers (6.843)
    - General (894)
    - Standard Thermoplastics (2.579)
      - General (75)
      - Polyolefins (1.288)
      - Polystyrenes (170)
      - PVC (534)
      - Polyester (369)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.373)
      - General (90)
      - Styrene Copolymers (121)
      - PC/PMMA (165)
      - Polyamides (479)
      - POM/PBT/PP (116)
      - Technical Compounds (402)
    - PUR (482)
    - Other (1.515)
      - General (47)
      - Composites/Thermosets (304)
      - High Performance (316)
      - Biopolymers (445)
      - Elastomers/TPE (150)
      - Recyclate (253)
  - Other Materials (61)
  - Distribution (350)
- Machinery (531)
  - General (134)
  - Plant Construction (15)
  - Core Machines (309)
    - General (119)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (73)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (35)
- Processing (1.776)
  - General (481)
  - Extrusion (630)
    - General (20)
    - Flexible Films (306)
    - Rigid Films/Sheets (126)
    - Pipes (76)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.430)
  - General (53)
  - Packaging (2.151)
  - Construction (348)
  - Automotive / Transport (1.032)
  - Electrical Appliances (231)
  - Consumer Goods (278)
  - Medical (215)
  - Technical (64)
  - Other (58)
- Regions and Countries (4.241)
  - World (197)
  - German-speaking Countries (504)
  - Europe (2.082)
    - General (513)
    - Italy (148)
    - France (157)
    - Spain/Portugal (106)
    - Great Britain/Ireland (530)
    - Low Countries (75)
    - Central Europe (183)
    - Scandinavia (48)
    - Russia (118)
    - Eastern Europe (61)
    - Southeastern Europe (143)
  - North America (501)
  - Asia (683)
    - General (123)
    - China (393)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (151)
  - Other (40)
  - South America (83)
- Other (3.301)
  - Recycling/Disposal (2.330)
  - Economic Trend (552)
  - Services (41)
  - Logistics (291)
  - Energy (87)
Production and Engineering (3.854)
- Polymer Materials (2.402)
  - Petrochemicals (66)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.860)
    - General (32)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (75)
    - Other (778)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (162)
      - Biopolymers (253)
      - Elastomers/TPE (115)
      - Recyclate (117)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (445)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (42)
  - Process (84)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (872)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (101)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (40)
Management (834)
- Purchasing (110)
- General Management (205)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (102)
- Logistics (349)
People (1.516)
Industry (6.748)
- General (1.305)
- Associations/Institutions (2.563)
- Legislation (1.514)
- Environment / Health (1.356)
- plas.TV - Plastics unite(d) (10)
Events (1.192)
Plastic Fantastic (585)
Commentaries (87)
Interviews (167)
Notes by Publisher (83)