Show topic list

Polymer Prices Standard Thermoplastics

POLYMER PRICES Polypropylene August 2015: Price reductions slightly greater than price relief / Producers‘ margins still well-padded / Market trending long / Downslide will gather speed in September	03.09.2015
POLYMER PRICES PVC August 2015: Producers pass on proportionate cost rise / Tough price round ends in a stalemate / Fall in titanium dioxide impacts rigid blends / Additional declines expected in September	03.09.2015
POLYMER PRICES Standard Thermoplastics Trend August 2015: Price cuts for PE and PVC still smaller than cost reduction / PP often a little higher / PS follows closely in the footsteps of SM / Imports more plentiful / Continuing price pressure	17.08.2015
POLYMER PRICES Polyethylene July 2015: Weak rollover dominates / Supply not yet sufficiently balanced / An improvement is nevertheless evident / Prices expected to fall in August / Demand will dictate the size of the reductions	05.08.2015
POLYMER PRICES Polypropylene July 2015: Standard grades tumble farther than monomer / Supply mostly back to normal as imports pad / Base compounds regather momentum / Price plunge in August	05.08.2015
POLYMER PRICES Styrenics July 2015: Fall in PS notations exceeds monomer slide / EPS decline not as steep / ABS moves into a rollover / Price pressure will continue into August	05.08.2015
POLYMER PRICES PVC July 2015: Rollover for base and emulsion grades / Slight downward corrections for compounds / Supply improves considerably / Price declines likely in August	05.08.2015
POLYMER PRICES Standard Thermoplastics Trend July 2015: Supply situation on the road to recovery / PE rolls over / PP follows the monomer down / PVC trending stable to slightly upward / PS takes its cue from the monomer trend	14.07.2015
POLYMER PRICES Polyethylene June 2015: Increases once again reach triple digits / Margins at record levels / Improvement slowly coming into sight / Notations likely to roll over or even fall in July	03.07.2015
POLYMER PRICES Polypropylene June 2015: Hikes continuously diminished / Prices barely exceed cost increase / Supply improves / Some relief likely in July / Compounds still firm	03.07.2015
POLYMER PRICES PVC June 2015: Producers once again achieve significant margin improvements / Tight market drives prices up / Supply situation appears to be easing / Notations could stabilise in July	03.07.2015
POLYMER PRICES Styrenics June 2015: Price boom comes to an end / Only ABS pointing up slightly / PS already crumbling / EPS rolls over / Holiday season will dampen demand in July / Discounts expected across the board	03.07.2015
POLYMER PRICES Standard Thermoplastics Trend June 2015: Polyethylene continues to point up / Further triple-digit increases / PP and PVC also see substantial hikes / Solely PS remains stable	15.06.2015
POLYMER PRICES Polyethylene May 2015: Price hikes exceed all records / Commodity plastic is more expensive than ever in Europe / Outages at southern European crackers quash initial signs of recovery / No improvement expected in June	03.06.2015
POLYMER PRICES Polypropylene May 2015: Wild upward flight continues / Market remains extremely tight / Improvements short-lived / June could see price records / Compounders' margins under pressure	03.06.2015
POLYMER PRICES Styrenics May 2015: Renewed SM price hike drives notations up / ABS remains tight / PS and EPS markets ease slightly / Uptrend continues into June	03.06.2015
POLYMER PRICES PVC May 2015: Increasingly tight supply situation drives notations up / Producers achieve margin gains / Little change expected in June / Prices continue to rise	03.06.2015
POLYMER PRICES Standard Thermoplastics Trend May 2015: Renewed significant hikes for polyolefins / PVC also rising steeply / Styrenics take a breather at impressive high / Situation only expected to improve by end of the quarter	14.05.2015
POLYMER PRICES Polyethylene April 2015: Catastrophic supply situation drives prices up / Ethylene price no longer plays a role / Further rises likely in May / Growing incentives for imports offer some small consolation	06.05.2015
POLYMER PRICES Polypropylene April 2015: Prices for standard PP explode as supply continues to tighten / Compounds follow the C3 cost rise / Commodities at monomer level / Further increases likely although notations could soon peak	06.05.2015
POLYMER PRICES Styrenics April 2015: SM cost explosion continues to drive prices up / PS and ABS reach levels last seen in autumn 2013 / Processors focus on securing volumes / Additional hikes likely in May	06.05.2015
POLYMER PRICES PVC April 2015: Producers achieve margin gains / Maintenance turnarounds and production problems curtail supply / Substantial, across-the-board increases / Additional hikes likely in May	06.05.2015
POLYMER PRICES Standard Thermoplastics Trend April 2015: Massive rises across the board / Tight market situation helps producers lift prices / Traditional market structures break up / No end to upsurge in sight / Will extruders run dry?	14.04.2015
POLYMER PRICES Polyethylene March 2015: Surprisingly strong turnaround as prices rocket / Production restrictions curb availability / Price rises exceed cost increase / Further hikes almost inevitable	07.04.2015
POLYMER PRICES Polypropylene March 2015: Producers pass on costs and achieve renewed margin improvement / Production problems continue to drive prices up despite stable feedstock costs	07.04.2015

Seite 29 von 42

Topic search

Plastics Information Europe

Polymer Prices (6.510)
- Petrochemicals (615)
- Standard Thermoplastics (1.050)
- PET (264)
- Engineering Thermoplastics (272)
- Recyclate (407)
  - General (6)
  - Standard Thermoplastics / Recyclate (200)
  - Engineering Thermoplastics / Recyclate (201)
- Polyurethanes (265)
- High Performance Polymers (2)
- Composites (198)
- Announcements (2.635)
- World Regions (632)
  - China (324)
    - Standard Thermoplastics (163)
    - Engineering Thermoplastics (161)
  - North America (184)
  - Russia (124)
- Spot Prices (141)
- Forecasts (29)
Companies (37.177)
- Polymer Materials (18.248)
  - Petrochemicals (3.319)
  - Charge (1.957)
    - General (101)
    - Masterbatches (347)
    - Additives (830)
    - Colours (402)
    - Reinforcements/Fillers (277)
  - Polymers (11.749)
    - General (756)
    - Standard Thermoplastics (4.076)
      - General (114)
      - Polyolefins (2.075)
      - Polystyrenes (364)
      - PVC (723)
      - Polyester (589)
      - Expandable (PS, PP, PE) (211)
    - Technical Thermoplastics (3.453)
      - General (354)
      - Styrene Copolymers (284)
      - PC/PMMA (491)
      - Polyamides (983)
      - POM/PBT/PP (341)
      - Technical Compounds (1.000)
    - PUR (832)
    - Other (2.632)
      - General (107)
      - Composites/Thermosets (419)
      - High Performance (660)
      - Biopolymers (726)
      - Elastomers/TPE (390)
      - Recyclate (330)
  - Distribution (1.223)
- Machinery (1.148)
  - General (33)
  - Plant Construction (148)
  - Core Machines (771)
    - General (92)
    - Extrusion (184)
    - Injection Moulding (389)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (17)
    - Compression Moulding (4)
  - Peripherals (190)
    - General (36)
    - Control Systems (4)
    - Automatisation (35)
    - Dies/Tools/Moulds (102)
    - Components (13)
  - Finishing (6)
- Processing (7.613)
  - General (950)
  - Extrusion (2.471)
    - General (131)
    - Flexible Films (1.197)
    - Rigid Films/Sheet (398)
    - Pipes (367)
    - Profiles/Rods (265)
    - Other (113)
  - Injection Moulding (1.854)
  - Blow Moulding (553)
  - PUR (343)
  - Other (1.187)
    - General (136)
    - Foam (321)
    - Composites/Thermosets (364)
    - Thermoforming (233)
    - Rotational Moulding (36)
    - Additive Manufacturing (97)
  - Finishing (255)
- Application (7.846)
  - General (145)
  - Packaging (3.382)
  - Construction (772)
  - Automotive / Transport (1.804)
  - Electrical Appliances (363)
  - Consumer Goods (723)
  - Medical (423)
  - Technical (234)
- Other (2.322)
  - Recycling/Disposal (1.853)
  - Services (265)
  - Logistics (204)
Commercial Register (176)
- Insolvency (170)
- Changes (6)
Markets (25.423)
- Polymer Materials (10.944)
  - Petrochemicals (2.700)
  - Charge (899)
    - General (42)
    - Masterbatches (100)
    - Additives (354)
    - Colours (166)
    - Reinforcements/Fillers (237)
  - Polymers (6.929)
    - General (910)
    - Standard Thermoplastics (2.603)
      - General (75)
      - Polyolefins (1.300)
      - Polystyrenes (171)
      - PVC (541)
      - Polyester (373)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.395)
      - General (92)
      - Styrene Copolymers (122)
      - PC/PMMA (167)
      - Polyamides (488)
      - POM/PBT/PP (118)
      - Technical Compounds (408)
    - PUR (488)
    - Other (1.533)
      - General (49)
      - Composites/Thermosets (308)
      - High Performance (319)
      - Biopolymers (446)
      - Elastomers/TPE (151)
      - Recyclate (260)
  - Other Materials (61)
  - Distribution (355)
- Machinery (537)
  - General (134)
  - Plant Construction (15)
  - Core Machines (313)
    - General (119)
    - Extrusion (38)
    - Injection Moulding (133)
    - Blow Moulding (15)
    - PUR (6)
    - Compression Moulding (2)
  - Peripherals (75)
    - General (21)
    - Automatisation (18)
    - Dies/Tools/Moulds (36)
- Processing (1.782)
  - General (486)
  - Extrusion (631)
    - General (20)
    - Flexible Films (307)
    - Rigid Films/Sheets (126)
    - Pipes (76)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.512)
  - General (54)
  - Packaging (2.192)
  - Construction (357)
  - Automotive / Transport (1.047)
  - Electrical Appliances (238)
  - Consumer Goods (281)
  - Medical (218)
  - Technical (64)
  - Other (61)
- Regions and Countries (4.267)
  - World (197)
  - German-speaking Countries (504)
  - Europe (2.102)
    - General (522)
    - Italy (152)
    - France (158)
    - Spain/Portugal (107)
    - Great Britain/Ireland (533)
    - Low Countries (75)
    - Central Europe (183)
    - Scandinavia (48)
    - Russia (119)
    - Eastern Europe (62)
    - Southeastern Europe (143)
  - North America (503)
  - Asia (684)
    - General (123)
    - China (394)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (152)
  - Other (41)
  - South America (84)
- Other (3.381)
  - Recycling/Disposal (2.379)
  - Economic Trend (567)
  - Services (43)
  - Logistics (304)
  - Energy (88)
Production and Engineering (3.885)
- Polymer Materials (2.419)
  - Petrochemicals (66)
  - Charge (451)
    - General (15)
    - Masterbatches (116)
    - Additives (232)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.870)
    - General (32)
    - Standard Themoplastics (370)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (76)
    - Other (786)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (163)
      - Biopolymers (255)
      - Elastomers/TPE (115)
      - Recyclate (122)
  - Other (32)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (450)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (43)
  - Process (84)
  - Application (97)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (60)
- New Products (881)
  - Packaging (578)
  - Construction (35)
  - Automotive / Transport (104)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (39)
  - Technical (8)
  - Other (38)
- Other (40)
Management (855)
- Purchasing (110)
- General Management (212)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (103)
- Logistics (362)
People (1.520)
Industry (6.858)
- General (1.322)
- Associations/Institutions (2.603)
- Legislation (1.552)
- Environment / Health (1.371)
- plas.TV - Plastics unite(d) (10)
Events (1.200)
Plastic Fantastic (593)
Commentaries (89)
Interviews (170)
Notes by Publisher (85)