Show topic list

Polymer Prices Standard Thermoplastics

POLYMER PRICES Polyethylene February 2017: Producers succeed in bringing about a trend turnaround / Mostly moderate margin increase / Imports from Middle East down to a trickle / Further price rises expected in March / Maintenance turnarounds restrict supply	03.03.2017
POLYMER PRICES Styrenics February 2017: All-time high of PS and ABS prices / Exorbitant SM price increase fuels skyrocketing notations / No full cost transfer / Price rally continues / EPS also approaching record high	03.03.2017
POLYMER PRICES Polypropylene February 2017: Producers pass costs through for all grades / Copo sees first margin gains / Supply limitations palpable in March / Demand swells / Prices rising sharply	03.03.2017
POLYMER PRICES PVC February 2017: Producers achieve the hoped-for trend reversal / Brisk orders and export opportunities allow initial small margin improvements / Clearer upwards movement in March over a broad front	02.03.2017
POLYMER PRICES Standard Thermoplastics Trend February 2017: Moderate margin improvements for the polyolefins / PVC still slightly weaker / Styrenics explode along with the monomer / Upward pressure to continue	13.02.2017
POLYMER PRICES Styrenics January 2017: Steep climb continues as SM drives / Most of cost rise passed on in direct deals / Rally gathers momentum / Historic highs likely for PS and ABS in February	03.02.2017
POLYMER PRICES Polypropylene January 2017: European producers fail to improve margins as costs cannot be passed on / Demand expected to rise in February / Prices on the way up	03.02.2017
POLYMER PRICES Polyethylene January 2017: Most producers pass on their higher costs / Demand still slow / Winter lull as pipe grades perform below average / Margin increases in February are a distinct possibility	03.02.2017
POLYMER PRICES PVC January 2017: Ethylene costs have essentially been passed on / Margin improvements put off until February / Increased costs and export opportunities pushing up notations still further	02.02.2017
POLYMER PRICES Standard Thermoplastics Trend January 2017: Cost increases mostly factored in without problems / Raising margins proves more difficult / Quiet start to the year	16.01.2017
POLYMER PRICES Styrenics December 2016: Steep SM cost increase drives notations upwards / Triple-digit hikes for PS and EPS / ABS reaches annual high / Uptrend expected to continue in January	04.01.2017
POLYMER PRICES Polypropylene December 2016: Producers forced to pass on cost relief / Compounds also drift downward / Hikes inevitable as new year starts / Suppliers seeking additional structural adjustments	04.01.2017
POLYMER PRICES Polyethylene December 2016: Most producers pass on lower costs / 2016 ends on a calm note / Suppliers prepare for January price offensive / Calls for margin restoration	04.01.2017
POLYMER PRICES PVC December 2016: Cost reductions for base material passed on / Plasticiser shortage triggers price hikes for flexible compounds / Across-the-board rises expected for January	03.01.2017
POLYMER PRICES Standard Thermoplastics Trend December 2016: Polyolefins and PVC notations decline / Triple-digit hike for styrenics / Demand muted as year draws to a close / Stability likely to prevail until New Year	14.12.2016
POLYMER PRICES Polyethylene November 2016: Weak demand prevents producers from passing on higher costs / LLD down again amid a flood of imports / Pipe sector suffers from slow sales / Further falls likely in December	05.12.2016
POLYMER PRICES Polypropylene November 2016: Hikes clearly below cost rise / Slack demand and falling C3 spot dampen market momentum / Prices sure to point downward in December	05.12.2016
POLYMER PRICES PVC November 2016: Producers' price rises fail to cover the cost increase / Additives drive up blend prices more than average / Notations likely to slip in December	05.12.2016
POLYMER PRICES Styrenics November 2016: Notations end their downward trend / Full cost transfer only for ABS / Price expectations boost demand / December will see significant increases	05.12.2016
POLYMER PRICES Standard Thermoplastics Trend November 2016: Notations follow higher monomer costs / Most increases fall short of cost rise / Limited availability of low-density PE grades / Prices likely to remain stable for the rest of the month	14.11.2016
POLYMER PRICES Polypropylene October 2016: Hikes across the board but below production cost rise / Supply normalises despite import weakness / Prices expected to spiral upward again in November	03.11.2016
POLYMER PRICES Polyethylene October 2016: Notations stagnant or declining despite rise in C2 / Some materials tend towards a surplus / Latest ethylene increase will likely bring price hikes in November	03.11.2016
POLYMER PRICES Styrenics October 2016: Steep declines for polystyrene and EPS / ABS caught in weak rollover / Demand normal / Across-the-board increases expected for November	03.11.2016
POLYMER PRICES PVC October 2016: Producers fail to pass on full ethylene cost rise / Rise in blends notations steeper than for base grades / November business muted ahead of winter hibernation	02.11.2016
POLYMER PRICES Standard Thermoplastics Trend October 2016: Producers unable to pass on all costs / Slack demand from end markets / Margins deteriorate / Monthly price movement likely flat	17.10.2016

Seite 24 von 41

Topic search

Plastics Information Europe

Polymer Prices (6.338)
- Petrochemicals (563)
- Standard Thermoplastics (1.017)
- PET (258)
- Engineering Thermoplastics (266)
- Recyclate (393)
  - General (6)
  - Standard Thermoplastics / Recyclate (193)
  - Engineering Thermoplastics / Recyclate (194)
- Polyurethanes (258)
- High Performance Polymers (2)
- Composites (192)
- Announcements (2.619)
- World Regions (613)
  - China (311)
    - Standard Thermoplastics (157)
    - Engineering Thermoplastics (154)
  - North America (178)
  - Russia (124)
- Spot Prices (135)
- Forecasts (22)
Companies (36.099)
- Polymer Materials (17.770)
  - Petrochemicals (3.226)
  - Charge (1.910)
    - General (99)
    - Masterbatches (342)
    - Additives (805)
    - Colours (391)
    - Reinforcements/Fillers (273)
  - Polymers (11.437)
    - General (738)
    - Standard Thermoplastics (3.968)
      - General (113)
      - Polyolefins (2.020)
      - Polystyrenes (355)
      - PVC (696)
      - Polyester (578)
      - Expandable (PS, PP, PE) (206)
    - Technical Thermoplastics (3.356)
      - General (352)
      - Styrene Copolymers (270)
      - PC/PMMA (474)
      - Polyamides (951)
      - POM/PBT/PP (326)
      - Technical Compounds (983)
    - PUR (810)
    - Other (2.565)
      - General (105)
      - Composites/Thermosets (414)
      - High Performance (641)
      - Biopolymers (714)
      - Elastomers/TPE (382)
      - Recyclate (309)
  - Distribution (1.197)
- Machinery (1.124)
  - General (31)
  - Plant Construction (144)
  - Core Machines (761)
    - General (92)
    - Extrusion (182)
    - Injection Moulding (382)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (183)
    - General (33)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (99)
    - Components (13)
  - Finishing (5)
- Processing (7.407)
  - General (927)
  - Extrusion (2.418)
    - General (128)
    - Flexible Films (1.171)
    - Rigid Films/Sheet (391)
    - Pipes (357)
    - Profiles/Rods (264)
    - Other (107)
  - Injection Moulding (1.795)
  - Blow Moulding (531)
  - PUR (329)
  - Other (1.161)
    - General (128)
    - Foam (316)
    - Composites/Thermosets (359)
    - Thermoforming (228)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (246)
- Application (7.624)
  - General (136)
  - Packaging (3.296)
  - Construction (754)
  - Automotive / Transport (1.744)
  - Electrical Appliances (354)
  - Consumer Goods (702)
  - Medical (413)
  - Technical (225)
- Other (2.174)
  - Recycling/Disposal (1.741)
  - Services (260)
  - Logistics (173)
Commercial Register (161)
- Insolvency (156)
- Changes (5)
Markets (24.597)
- Polymer Materials (10.615)
  - Petrochemicals (2.613)
  - Charge (882)
    - General (39)
    - Masterbatches (98)
    - Additives (349)
    - Colours (162)
    - Reinforcements/Fillers (234)
  - Polymers (6.718)
    - General (862)
    - Standard Thermoplastics (2.536)
      - General (74)
      - Polyolefins (1.271)
      - Polystyrenes (166)
      - PVC (520)
      - Polyester (362)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.349)
      - General (89)
      - Styrene Copolymers (115)
      - PC/PMMA (161)
      - Polyamides (473)
      - POM/PBT/PP (114)
      - Technical Compounds (397)
    - PUR (477)
    - Other (1.494)
      - General (47)
      - Composites/Thermosets (302)
      - High Performance (314)
      - Biopolymers (441)
      - Elastomers/TPE (147)
      - Recyclate (243)
  - Other Materials (61)
  - Distribution (341)
- Machinery (524)
  - General (131)
  - Plant Construction (14)
  - Core Machines (307)
    - General (117)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.754)
  - General (463)
  - Extrusion (628)
    - General (20)
    - Flexible Films (305)
    - Rigid Films/Sheets (126)
    - Pipes (75)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (181)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.337)
  - General (51)
  - Packaging (2.099)
  - Construction (340)
  - Automotive / Transport (1.012)
  - Electrical Appliances (230)
  - Consumer Goods (275)
  - Medical (213)
  - Technical (63)
  - Other (54)
- Regions and Countries (4.197)
  - World (196)
  - German-speaking Countries (499)
  - Europe (2.052)
    - General (505)
    - Italy (147)
    - France (155)
    - Spain/Portugal (105)
    - Great Britain/Ireland (524)
    - Low Countries (75)
    - Central Europe (180)
    - Scandinavia (46)
    - Russia (115)
    - Eastern Europe (57)
    - Southeastern Europe (143)
  - North America (498)
  - Asia (682)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (148)
  - Other (40)
  - South America (82)
- Other (3.170)
  - Recycling/Disposal (2.251)
  - Economic Trend (521)
  - Services (41)
  - Logistics (273)
  - Energy (84)
Production and Engineering (3.843)
- Polymer Materials (2.395)
  - Petrochemicals (63)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.856)
    - General (31)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (74)
    - Other (776)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (161)
      - Biopolymers (253)
      - Elastomers/TPE (115)
      - Recyclate (116)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (443)
  - Polymer Materials (145)
  - Technical (16)
  - Product Development (42)
  - Process (83)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (871)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (39)
Management (799)
- Purchasing (108)
- General Management (191)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (100)
- Logistics (332)
People (1.514)
Industry (6.571)
- General (1.275)
- Associations/Institutions (2.504)
- Legislation (1.455)
- Environment / Health (1.327)
- plas.TV - Plastics unite(d) (10)
Events (1.176)
Plastic Fantastic (576)
Commentaries (85)
Interviews (161)
Notes by Publisher (80)