Show topic list

Companies Other

LEONHARD KURZ German film tech specialist commissions mechanical PET recycling plant	17.09.2025
FLEXIBLE PACKAGING Mars, Nestlé, PepsiCo and others launch US Flexible Film Initiative to tackle plastic packaging waste	15.09.2025
LOGISTICS Artificial capacity shortages lend breath of fresh air to freight rates	12.09.2025
MURA Process-tech supplier to build chemical recycling facility in Singapore	11.09.2025
TUBIS Groundbreaking ceremony for pyrolysis plant in Germany	10.09.2025
ENVALIOR Lanxess-Advent JV diverts 88% of generated waste from landfill / 2024 sustainability report published	09.09.2025
BOREALIS Modernisation, expansion of PP compounding facilities in Austria	08.09.2025
RECYCLING Fraunhofer develops solvent-based process for hard-to-recycle plastics / High-purity recyclates from automotive, construction waste	08.09.2025
LOGISTICS Chinese firms expand footprint in Europe / German government moves to scrap supply chain law	05.09.2025
MENSING German recycler continues growth trajectory / Additional site acquired	04.09.2025
VANDEN RECYCLING UK recycler plans to shutter domestic plant / Move in response to tough market for reclaimed plastics	03.09.2025
LOGISTICS Global trade heavily impacted by typhoon season / DB Cargo management plans to close workshops	29.08.2025
SABIC JV with Plastic Energy produces first pyrolysis oil batch	29.08.2025
SINGLE-USE PLASTICS Recycling sector warns of market distortion under new EU implementing decision / Industry contends definitions / Non-EU waste may be counted towards targets	28.08.2025
MATTERR Plans to build PET chemical recycling plant in Germany / EUR 63 mn invested	27.08.2025
RECYCLING AUSTRIA Sizable increase in PET recycling volumes thanks to introduction of single-use deposit scheme	26.08.2025
KIVO / KRAS Recycling JV Reks to be discontinued / Future of plant in Kosovo uncertain	25.08.2025
POLIFILM Film manufacturer expands German site with production hall, three extrusion lines	25.08.2025
LOGISTICS Freight rates down on almost all routes / US becoming problematic for world trade	22.08.2025
IKEA Retailer Ingka invests in Chinese recycler Re-mall / Plans to invest in expansion of current 50,000 t/y capacity, product development	22.08.2025
BEWI EPS specialist in the red again / Increase of capital considered / Talk of possible acquisition	21.08.2025
K 2025 Messe Düsseldorf launches K-Alliance for global plastics and rubber trade fairs / Guided tours to be offered at K show	21.08.2025
REMONDIS German waste disposal company takes over competitor Siemer	21.08.2025
RECYCLING UK 'Urgent action' needed in reclaim industry – BPF official / Plant closures highlight problems / Viridor for sale?	18.08.2025
BOREALIS Operating result plummets 73% in first half / Growth in turnover, sales volume / Feedstock costs, inventory effects weigh on parent OMV earnings	15.08.2025

Seite 1 von 80

Topic search

Plastics Information Europe

Polymer Prices (6.121)
- Petrochemicals (508)
- Standard Thermoplastics (977)
- PET (251)
- Engineering Thermoplastics (258)
- Recyclate (376)
  - General (4)
  - Standard Thermoplastics / Recyclate (186)
  - Engineering Thermoplastics / Recyclate (186)
- Polyurethanes (249)
- High Performance Polymers (2)
- Composites (185)
- Announcements (2.580)
- World Regions (591)
  - China (297)
    - Standard Thermoplastics (150)
    - Engineering Thermoplastics (147)
  - North America (170)
  - Russia (124)
- Spot Prices (128)
- Forecasts (16)
Companies (34.978)
- Polymer Materials (17.243)
  - Petrochemicals (3.115)
  - Charge (1.865)
    - General (89)
    - Masterbatches (340)
    - Additives (782)
    - Colours (384)
    - Reinforcements/Fillers (270)
  - Polymers (11.089)
    - General (718)
    - Standard Thermoplastics (3.845)
      - General (113)
      - Polyolefins (1.953)
      - Polystyrenes (342)
      - PVC (672)
      - Polyester (565)
      - Expandable (PS, PP, PE) (200)
    - Technical Thermoplastics (3.263)
      - General (349)
      - Styrene Copolymers (261)
      - PC/PMMA (464)
      - Polyamides (906)
      - POM/PBT/PP (319)
      - Technical Compounds (964)
    - PUR (791)
    - Other (2.472)
      - General (101)
      - Composites/Thermosets (411)
      - High Performance (618)
      - Biopolymers (701)
      - Elastomers/TPE (370)
      - Recyclate (271)
  - Distribution (1.174)
- Machinery (1.092)
  - General (28)
  - Plant Construction (139)
  - Core Machines (745)
    - General (90)
    - Extrusion (181)
    - Injection Moulding (371)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (175)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (94)
    - Components (13)
  - Finishing (5)
- Processing (7.210)
  - General (900)
  - Extrusion (2.362)
    - General (123)
    - Flexible Films (1.140)
    - Rigid Films/Sheet (384)
    - Pipes (351)
    - Profiles/Rods (259)
    - Other (105)
  - Injection Moulding (1.741)
  - Blow Moulding (519)
  - PUR (314)
  - Other (1.134)
    - General (122)
    - Foam (307)
    - Composites/Thermosets (354)
    - Thermoforming (222)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (240)
- Application (7.406)
  - General (130)
  - Packaging (3.199)
  - Construction (734)
  - Automotive / Transport (1.695)
  - Electrical Appliances (339)
  - Consumer Goods (688)
  - Medical (404)
  - Technical (217)
- Other (2.027)
  - Recycling/Disposal (1.628)
  - Services (255)
  - Logistics (144)
Commercial Register (135)
- Insolvency (130)
- Changes (5)
Markets (23.653)
- Polymer Materials (10.207)
  - Petrochemicals (2.505)
  - Charge (865)
    - General (38)
    - Masterbatches (95)
    - Additives (342)
    - Colours (159)
    - Reinforcements/Fillers (231)
  - Polymers (6.447)
    - General (812)
    - Standard Thermoplastics (2.456)
      - General (74)
      - Polyolefins (1.226)
      - Polystyrenes (158)
      - PVC (505)
      - Polyester (352)
      - Expandable (PS, PP, PE) (141)
    - Technical Thermoplastics (1.289)
      - General (87)
      - Styrene Copolymers (108)
      - PC/PMMA (155)
      - Polyamides (442)
      - POM/PBT/PP (110)
      - Technical Compounds (387)
    - PUR (462)
    - Other (1.428)
      - General (47)
      - Composites/Thermosets (296)
      - High Performance (303)
      - Biopolymers (433)
      - Elastomers/TPE (141)
      - Recyclate (208)
  - Other Materials (59)
  - Distribution (331)
- Machinery (511)
  - General (130)
  - Plant Construction (14)
  - Core Machines (296)
    - General (112)
    - Extrusion (37)
    - Injection Moulding (126)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.718)
  - General (442)
  - Extrusion (621)
    - General (20)
    - Flexible Films (301)
    - Rigid Films/Sheets (125)
    - Pipes (74)
    - Profiles/Rods (90)
    - Other (11)
  - Injection Moulding (179)
  - Blow Moulding (43)
  - PUR (81)
  - Other (307)
    - General (20)
    - Foam (80)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.163)
  - General (46)
  - Packaging (2.013)
  - Construction (320)
  - Automotive / Transport (981)
  - Electrical Appliances (222)
  - Consumer Goods (259)
  - Medical (209)
  - Technical (61)
  - Other (52)
- Regions and Countries (4.128)
  - World (195)
  - German-speaking Countries (488)
  - Europe (2.007)
    - General (488)
    - Italy (144)
    - France (155)
    - Spain/Portugal (101)
    - Great Britain/Ireland (512)
    - Low Countries (75)
    - Central Europe (179)
    - Scandinavia (46)
    - Russia (111)
    - Eastern Europe (54)
    - Southeastern Europe (142)
  - North America (494)
  - Asia (680)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (27)
    - India (87)
  - Middle East (143)
  - Other (40)
  - South America (81)
- Other (2.926)
  - Recycling/Disposal (2.117)
  - Economic Trend (451)
  - Services (41)
  - Logistics (244)
  - Energy (73)
Production and Engineering (3.792)
- Polymer Materials (2.362)
  - Petrochemicals (60)
  - Charge (442)
    - General (14)
    - Masterbatches (112)
    - Additives (228)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.829)
    - General (30)
    - Standard Themoplastics (365)
    - Technical Thermoplastics (602)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (207)
      - POM/PBT/PP (69)
      - Technical Compounds (180)
    - PUR (72)
    - Other (760)
      - General (21)
      - Composites/Thermosets (108)
      - High Performance (160)
      - Biopolymers (247)
      - Elastomers/TPE (114)
      - Recyclate (110)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (437)
  - Polymer Materials (144)
  - Technical (15)
  - Product Development (41)
  - Process (83)
  - Application (92)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (859)
  - Packaging (567)
  - Construction (35)
  - Automotive / Transport (99)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (8)
  - Other (38)
- Other (39)
Management (732)
- Purchasing (104)
- General Management (167)
- Company organisation (44)
- Marketing/Sales (15)
- Human Resources (7)
- Finances (96)
- Logistics (299)
People (1.501)
Industry (6.266)
- General (1.229)
- Associations/Institutions (2.387)
- Legislation (1.362)
- Environment / Health (1.278)
- plas.TV - Plastics unite(d) (10)
Events (1.152)
Plastic Fantastic (556)
Commentaries (83)
Interviews (144)
Notes by Publisher (72)