www.pieweb.com
Middle East Conflict
Latest news and market reports on the impact on the plastics industry.
To the topic page
Polymer prices standard thermoplastics
POLYMER PRICES
Standard Thermoplastics PVC September 2013: Base material goes up slightly more than feedstocks / Compounds increase due to more expensive additives / Crumbling prices likely in October
 		03.10.2013
CORRECTION - POLYMER PRICES
Standard Thermoplastics PE September 2013: Producers succeed in passing on increased costs / Attempts at margin improvements fail / Renewed fall in ethylene notation puts pressure on prices / Tough battles likely
 		03.10.2013
POLYMER PRICES
Standard Thermoplastics PP September 2013: Propylene hike drives prices higher / Producers fail to secure more than the cost rise / General reluctance to buy / Prices likely to drop in October
 		03.10.2013
POLYMER PRICES
Standard Thermoplastics Styrenics September 2013: Passing on of SM costs drives PS and EPS to record heights / Processors buy only bare minimum / ABS prices rise slightly / Imminent price correction
 		03.10.2013
POLYMER PRICES
Standard Thermoplastics September 2013 - NEW: Individual standard thermoplastics reports / Updated structure and enhanced reviews
 		03.10.2013
POLYMER PRICES
PET September 2013: Producers succeed in passing on costs / Market largely balanced and calm / Imports rise as Asian notations fall / Prices expected to drop in October
 		02.10.2013
POLYMER PRICES
Standard Thermoplastics Trend September 2013: Polyolefin rise held to cost increase / PVC and styrenics with slightly more momentum / No across-the-board easing / Only PE tending weaker
 		13.09.2013
POLYMER PRICES
Standard Thermoplastics August 2013: Notations rise on a broad front and exceed costs / Demand in summer holiday season driven by pre-buying / Substantial increases likely in September
 		04.09.2013
POLYMER PRICES
Standard Thermoplastics PVC August 2013: Base material hikes exceed monomer rise / Blending components drive compounds higher / Price momentum could pick up in September
 		04.09.2013
POLYMER PRICES
PET August 2013: Moderate erosion despite firm input costs / Market balanced at weak level / Imports slack / Middle East crisis continues to drive costs
 		03.09.2013
POLYMER PRICES
Standard Thermoplastics Trend August 2013: Hikes overcompensate cost rise / Supply limited by production cuts and outages / Demand strong for a summer month / Prices could climb further
 		13.08.2013
POLYMER PRICES
Standard Thermoplastics July 2013: All products rise despite stagnating costs / Market tight due to poor supply and normal demand / Monomer-plus-margin strategy drives calls for hikes
 		05.08.2013
POLYMER PRICES
Standard Thermoplastics PVC July 2013: Notations surprisingly on the rise / Producers push through margin improvements / Market situation tightens / Cost surge fuels new demands
 		05.08.2013
POLYMER PRICES
PET July 2013: Notations lose a little more ground / Trend reversed over the month / Summer weather improves market balance / Buyers open their wallets again / Imports decline
 		02.08.2013
POLYMER PRICES
Standard Thermoplastics Trend July 2013: Moderate increases for most products / Sharp output cuts / Demand still sluggish / Rising crude oil notations support producer hike plans
 		12.07.2013
Seite 62 von 84
© 2026 by Plastics Information Europe, Bad Homburg
Date of print: 03/06/2026
Ref: qyfrtcmeic2nqubrzmycrk55
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?page=62&pageid=700111