www.pieweb.com
Middle East Conflict
Latest news and market reports on the impact on the plastics industry.
To the topic page
Polymer prices standard thermoplastics
POLYMER PRICES
Polyethylene October 2013: Film grade rebates exceed producer cost relief / Supply still tight / End markets not yet stimulated / Further deterioration seen but downswing could bottom out
 		05.11.2013
POLYMER PRICES
Styrenics October 2013: Rally is over / SM pulls polymer downward / Monomer increase passed on for PS / Margin improvement for EPS producers / Further deterioration expected
 		05.11.2013
POLYMER PRICES
Standard Thermoplastics Trend October 2013: Lower feedstock costs factored in to polyolefins / Price cuts less marked with PVC / Styrenic customers benefit only partially / PE and PS weaker / Stable prospects at current level
 		14.10.2013
POLYMER PRICES
Standard Thermoplastics PVC September 2013: Base material goes up slightly more than feedstocks / Compounds increase due to more expensive additives / Crumbling prices likely in October
 		03.10.2013
CORRECTION - POLYMER PRICES
Standard Thermoplastics PE September 2013: Producers succeed in passing on increased costs / Attempts at margin improvements fail / Renewed fall in ethylene notation puts pressure on prices / Tough battles likely
 		03.10.2013
POLYMER PRICES
Standard Thermoplastics PP September 2013: Propylene hike drives prices higher / Producers fail to secure more than the cost rise / General reluctance to buy / Prices likely to drop in October
 		03.10.2013
POLYMER PRICES
Standard Thermoplastics Styrenics September 2013: Passing on of SM costs drives PS and EPS to record heights / Processors buy only bare minimum / ABS prices rise slightly / Imminent price correction
 		03.10.2013
POLYMER PRICES
Standard Thermoplastics September 2013 - NEW: Individual standard thermoplastics reports / Updated structure and enhanced reviews
 		03.10.2013
POLYMER PRICES
PET September 2013: Producers succeed in passing on costs / Market largely balanced and calm / Imports rise as Asian notations fall / Prices expected to drop in October
 		02.10.2013
POLYMER PRICES
Standard Thermoplastics Trend September 2013: Polyolefin rise held to cost increase / PVC and styrenics with slightly more momentum / No across-the-board easing / Only PE tending weaker
 		13.09.2013
POLYMER PRICES
Standard Thermoplastics August 2013: Notations rise on a broad front and exceed costs / Demand in summer holiday season driven by pre-buying / Substantial increases likely in September
 		04.09.2013
POLYMER PRICES
Standard Thermoplastics PVC August 2013: Base material hikes exceed monomer rise / Blending components drive compounds higher / Price momentum could pick up in September
 		04.09.2013
POLYMER PRICES
PET August 2013: Moderate erosion despite firm input costs / Market balanced at weak level / Imports slack / Middle East crisis continues to drive costs
 		03.09.2013
POLYMER PRICES
Standard Thermoplastics Trend August 2013: Hikes overcompensate cost rise / Supply limited by production cuts and outages / Demand strong for a summer month / Prices could climb further
 		13.08.2013
POLYMER PRICES
Standard Thermoplastics July 2013: All products rise despite stagnating costs / Market tight due to poor supply and normal demand / Monomer-plus-margin strategy drives calls for hikes
 		05.08.2013
Seite 61 von 83
© 2026 by Plastics Information Europe, Bad Homburg
Date of print: 11/04/2026
Ref: tvra5yu3dgrgmp5511bdr245
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?page=61&pageid=700111