www.pieweb.com
Polymer prices standard thermoplastics
POLYMER PRICES
PET August 2013: Moderate erosion despite firm input costs / Market balanced at weak level / Imports slack / Middle East crisis continues to drive costs
 		03.09.2013
POLYMER PRICES
Standard Thermoplastics Trend August 2013: Hikes overcompensate cost rise / Supply limited by production cuts and outages / Demand strong for a summer month / Prices could climb further
 		13.08.2013
POLYMER PRICES
Standard Thermoplastics July 2013: All products rise despite stagnating costs / Market tight due to poor supply and normal demand / Monomer-plus-margin strategy drives calls for hikes
 		05.08.2013
POLYMER PRICES
Standard Thermoplastics PVC July 2013: Notations surprisingly on the rise / Producers push through margin improvements / Market situation tightens / Cost surge fuels new demands
 		05.08.2013
POLYMER PRICES
PET July 2013: Notations lose a little more ground / Trend reversed over the month / Summer weather improves market balance / Buyers open their wallets again / Imports decline
 		02.08.2013
POLYMER PRICES
Standard Thermoplastics Trend July 2013: Moderate increases for most products / Sharp output cuts / Demand still sluggish / Rising crude oil notations support producer hike plans
 		12.07.2013
POLYMER PRICES
Standard Thermoplastics PVC June 2013: Margins on S-PVC improve less than hoped / Blends rise on higher matrix / Paste rolls over / Hikes sought despite lower cost base
 		03.07.2013
POLYMER PRICES
Standard Thermoplastics June 2013: Margin improvement for PE smaller than hoped / Monomer boosts PP, PS and EPS / Tightness despite weak demand / Costs stable / More hikes ahead
 		03.07.2013
POLYMER PRICES
PET June 2013: Notations follow costs downward / Worldwide oversupply tendency / European demand clearly below seasonal expectations / New capacities pressure outlook further
 		02.07.2013
POLYMER PRICES
Standard Thermoplastics Trend June 2013: Producers push for margin improvement / Tighter supply supports plans for PE hikes / Other polymers moving higher / Demand still below expectations
 		14.06.2013
POLYMER PRICES
Standard Thermoplastics May 2013: Producers hang onto some of their cost relief / Hopes of turnaround unfulfilled / Bottoming out points the way to balanced market / Hikes in June likely
 		05.06.2013
POLYMER PRICES
Standard Thermoplastics PVC May 2013: Large percentage of cost reductions passed on / Plasticised compounds strong downward adjustment / Paste prices also falling / Consolidation in June
 		05.06.2013
POLYMER PRICES
PET May 2013: Only sluggish movement in May / Unseasonably cold weather dampens demand / Capacity cuts slow to grip / PX rolls over / Downward potential for notations
 		04.06.2013
POLYMER PRICES
Standard Thermoplastics Trend May 2013: Naphtha rise not enough to trigger a run / Demand still modest / Ongoing battle for share of cost relief / No Turnaround in sight
 		14.05.2013
POLYMER PRICES
Standard Thermoplastics April 2013: PE producers forced to pass on full cost reduction / PP holds up better / PVC and PS buyers also see price cuts / Rising trend in May possible
 		06.05.2013
Seite 59 von 80
© 2025 by Plastics Information Europe, Bad Homburg
Date of print: 23/09/2025
Ref: r1s4iib5orsvh2yjnofr13zy
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?page=59&pageid=700111