www.pieweb.com
News about materials, production and technology
BASF
HALS additives to be introduced at “K 2016” / Applications in automotive interiors and technical construction textiles
08.09.2016
TENASITECH
PA additive launched / Enhanced hardness and scuff resistance
06.09.2016
UBE
Launching new PA packaging grade at “K 2016” fair / Reduced risk of retort shock
24.08.2016
KRAIBURG TPE
Flame retardant TPEs for construction applications / Series of compounds to be introduced at “K 2016”
23.08.2016
LATI
UL approval for recycling of flame retardant reinforced PA 6.6 / Recovery rates of up to 50%
19.08.2016
PLA
Researchers show that a new polymer phase can be induced in PLA / Decrease in degradation rate / Brown University team believe new polymer morphology could lead to better medical devices
18.08.2016
SO.F.TER
PA-based compounds launched / Glass microspheres cut weight of plastic part / Ideal for automotive manufacturers
16.08.2016
ARLANXEO
HNBR elastomers for low temperature applications developed / Two grades to be introduced at “K 2016”
15.08.2016
ZEON
HNBR introduced for sealing applications / Compression set improvement through longer aging times
12.08.2016
FKUR
New biodegradable blends developed for thinner compostable films
11.08.2016
BASF
New high-end “Ultramid” with improved properties / “Huge step forward”
10.08.2016
DSM
PPA grades launched as alternative to die-cast metals / Cost savings of up to 50% offered / Die-cast replacement market growing close to 10% annually
28.07.2016
LANXESS
Range of hydrolysis stabilisers is extended / Ease in processing without preheating
27.07.2016
SOLVAY SPECIALTY POLYMERS
Food contact PPS range extended with introduction of three grades
26.07.2016
BASF
Certified biobased compostable particle foam added to “ecovio” range / High mechanical and thermal properties / Food contact alternative to be introduced
20.07.2016
Seite 39 von 101
© 2026 by Plastics Information Europe, Bad Homburg
Date of print: 18/11/2026
Ref: k15kssne5rbep5gbsbgqkkdy
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?page=39&pageid=1031