www.pieweb.com
Polymer prices
POLYMER PRICES
Standard Recyclate October 2013: Producers manage only occasional hikes / Downward trend in primary market puts an end to plans to raise scrap prices / Sideway movement for prices
 		18.10.2013
3B
Price increase for fibreglass in 2014
 		17.10.2013
EP MINERALS
Prices to go up worldwide for diatomite additive
 		14.10.2013
POLYMER PRICES
Standard Thermoplastics Trend October 2013: Lower feedstock costs factored in to polyolefins / Price cuts less marked with PVC / Styrenic customers benefit only partially / PE and PS weaker / Stable prospects at current level
 		14.10.2013
COMPOSITES
Reichhold and Ashland increase resin prices in the Americas
 		11.10.2013
POLYMER PRICES
Russia September 2013: Most polymers climb upwards / Exceptions PET and PVC / Ruble stabilises / High season ends for beverage and construction sectors / Predominant downward trend
 		11.10.2013
POLYMER PRICES
North America September 2013: Price increases for PE and PS / PP and PVC roll over / Tight market may drive PE up again in October / Downward trend dominates / Engineering thermoplastics continue sluggish
 		10.10.2013
KISUMA
Price increase for PVC stabilisers
 		10.10.2013
POLYMER PRICES
Composites/GRP September 2013: Ortho resins prices rise slightly at the top end of the range / Demand largely normal / Feedstock hikes could drive developments in October / Glass fibre reinforcements mostly unchanged
 		08.10.2013
POLYMER PRICES
Engineering Thermoplastics September 2013: Little movement with traditional engineering polymers / Price increases for commodity-related ABS and PP compounds / Situation likely to remain predominantly calm in October
 		07.10.2013
KURARAY
Global price increase for PVA and VAM
 		04.10.2013
CORRECTION - POLYMER PRICES
Standard Thermoplastics PE September 2013: Producers succeed in passing on increased costs / Attempts at margin improvements fail / Renewed fall in ethylene notation puts pressure on prices / Tough battles likely
 		03.10.2013
POLYMER PRICES
Standard Thermoplastics PP September 2013: Propylene hike drives prices higher / Producers fail to secure more than the cost rise / General reluctance to buy / Prices likely to drop in October
 		03.10.2013
POLYMER PRICES
Standard Thermoplastics Styrenics September 2013: Passing on of SM costs drives PS and EPS to record heights / Processors buy only bare minimum / ABS prices rise slightly / Imminent price correction
 		03.10.2013
POLYMER PRICES
Standard Thermoplastics PVC September 2013: Base material goes up slightly more than feedstocks / Compounds increase due to more expensive additives / Crumbling prices likely in October
 		03.10.2013
Seite 262 von 422
© 2026 by Plastics Information Europe, Bad Homburg
Date of print: 12/08/2026
Ref: 2m2qt1552qyr0t55ya5weu45
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?page=262&pageid=700110