www.pieweb.com
Polymer prices recyclate
POLYMER PRICES
Engineering recyclate May 2012: rPA 6 and rPC prices rise despite slack bank holiday business / Other grades roll over / Plastic scrap still expensive but more readily available / Despite poor margins, prices likely to roll over at the end of Q2
 		17.05.2012
POLYMER PRICES
Standard Recyclate May 2012: Only minor gains for producers / Buyers' hold-out in primary market influences secondary sector / Persistently high procurement costs meet order slowdown / First plants idled
 		16.05.2012
POLYMER PRICES
Engineering recyclate April 2012: Rising trend as Q2 starts / Primary polymer increases roll on /Tight supply of input material drives secondary costs upward / Triple-digit increases could be in store for May
 		20.04.2012
POLYMER PRICES
Standard recyclate April 2012: Breather from rLDPE film price rises / Slack Easter holiday demand brakes momentum / Capacity cuts for rPE / Tightness drives rPP and HIPS forward / Building season comes to life
 		19.04.2012
POLYMER PRICES
Engineering recyclate March 2012: Secondary ABS continues to rise / Upward tendencies for rPA and rPC / rPOM and rPP compounds stay put / Production scrap increasingly tight and expensive / Price rises imminent
 		19.03.2012
POLYMER PRICES
Standard recyclate March 2012: Primary market surge pulls secondary notations up / Double-digit rises for rPP and rPS / Slighter gains for rPE / Virgin polymer tight and expensive / Substantial hikes planned
 		16.03.2012
POLYMER PRICES
Engineering recyclate February 2012: Anticipated primary market increases coupled with product shortages drive ABS and PA 6 recyclate up / Rollover dominates elsewhere / Supply and demand stable at a high level / Feedstocks continue to rise
 		20.02.2012
POLYMER PRICES
Standard recyclate February 2012: Upward momentum across the board / Primary market price surge pulls secondary sector out of the dregs / Rapid draw-down of inventories / Fresh hikes a strong possibility
 		17.02.2012
POLYMER PRICES
Engineering recyclate January 2012: Prices roll over across the board / Stock replenishing measures drive demand / Automotive sector gets off to a strong start / Recyclers plan significant hikes
 		19.01.2012
POLYMER PRICES
Standard recyclate January 2012: Firming primary market ends secondary price slide / Rollover for rPP and weak rollover for rPE / Early gains for PS / Output normal despite building off-season / Increasing risk of hikes
 		18.01.2012
POLYMER PRICES
Engineering Recyclate December 2011: Stability prevails / rPOM follows primary material down slightly / rPP producers pass on cost reductions / Automotive suppliers begin end-of-year rallye / Rollover likely
 		19.12.2011
POLYMER PRICES
Standard Recyclate December 2011: Prices slide again despite weak rollover for primary material and run on recyclate / Short month and high output limit stock-building efforts / Rollover likely despite high costs
 		16.12.2011
POLYMER PRICES
Engineering Recyclate November 2011: Pressure from crumbling primary market impacts secondary sector / Prices for rABS, rPC and rPP-Copo compounds slip / Margins suffer as plastic scrap prices remain high / Recyclers will take a tough line on a rollover
 		21.11.2011
POLYMER PRICES
Standard Recyclate November 2011: Downswing trend in primary market pressures rLDPE, rPP / Weak rollover for rHDPE and rHIPS / Building absorbs large output / High costs / Rollover mostly sought
 		18.11.2011
POLYMER PRICES
Engineering Recyclate October 2011: End to the primary market's Q3 price cap causes recyclate notations to crumble / Double-digit falls abound / rPP compounds stable / Availability of plastic scrap improves / Declining orders / Stability possible
 		20.10.2011
Seite 23 von 26
© 2026 by Plastics Information Europe, Bad Homburg
Date of print: 21/02/2026
Ref: qqe5sva53nky4b45xt4mngif
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?page=23&pageid=700115