www.pieweb.com
Polymer prices engineering thermoplastics
POLYMER PRICES
Engineering Thermoplastics in June 2011: Many grades move up again / ABS, polyamides and PBT are hit particularly hard / Butadiene shortage is the driving factor / Demand significantly weaker / Upward pressure should ease in July
 		06.07.2011
POLYMER PRICES
Engineering Thermoplastics in May 2011: Butadiene price explosion triggers triple-digit rise for ABS / Higher costs for PA 6, PMMA and PP / Limited feedstock supplies / High stock levels dampen ordering activity / Calls for fresh increases
 		07.06.2011
POLYMER PRICES
Engineering Thermoplastics in April 2011: Upswing slows down slightly / PBT, POM and PMMA climb by nearly EUR 100/t / Q2 agreements tighten lower price levels / Price hikes likely again in May
 		05.05.2011
POLYMER PRICES
Engineering Thermoplastics in March 2011: Considerable increases at the end of Q1 / Only POM remains stable / Feedstock costs drop down a notch / Supply tight / Significant rises expected for quarterly agreements
 		06.04.2011
POLYMER PRICES
Engineering Thermoplastics in February 2011: All materials still rising / PA 6 and POM soar by more than EUR 200/t / Cost wave continues to roll through the markets / No time for a breather before Q2
 		04.03.2011
POLYMER PRICES
Engineering Thermoplastics in January 2011: Petrochemical cost explosion hits engineering polymers / Benzene takes to new heights prompting triple-digit rises on a broad front / Upward momentum likely to continue through February
 		04.02.2011
POLYMER PRICES
Engineering Thermoplastics in December 2010: First reactions to cost-driven increases / Extra-low prices still being cleared out / Supply becomes increasingly tight / Q1 kicks off with the threat of extensive hikes
 		06.01.2011
POLYMER PRICES
Engineering Thermoplastics in November 2010: Stability dominates / Extra-low prices reeled in / Additives continue upward surge / Supply situation improves slightly at year end / High price increases announced for December
 		06.12.2010
POLYMER PRICES
Engineering Thermoplastics in October 2010: Price hikes take a breather / Only POM rises significantly / High additive costs drive specialities / Supply stabilises / Fresh cost wave likely in November
 		04.11.2010
POLYMER PRICES
Engineering Thermoplastics in September 2010: Notations continue to climb / Increase more marked with specialised materials / PA has hit the stratosphere / PP compounds down slightly / Tension remains as additives drive prices up
 		06.10.2010
POLYMER PRICES
Engineering Thermoplastics in August 2010: Prices still under pressure / PC, POM and PBT move up / Polyamides take a breather / Supply remains tight / Delivery times lengthen / Switching to higher gear in September?
 		06.09.2010
POLYMER PRICES
Engineering Thermoplastics in July 2010: Long-term negotiations drive notations up / Only ABS and PP compounds stable / Shortages further prolong delivery times / Risk of increases despite holiday season
 		05.08.2010
POLYMER PRICES
Engineering Thermoplastics in June 2010: Hikes continue despite feedstock decline / For many grades of polymer it was a seller's market / Quarterly and semi-annual contracts see consistent upward price momentum
 		06.07.2010
POLYMER PRICES
Engineering Thermoplastics in May 2010: Prices continue to spiral / All materials aside from PP compounds and PMMA again show triple-digit increases / PA 6.6 goes through the roof / Shortages abound / Outlook varied
 		07.06.2010
POLYMER PRICES
Engineering Thermoplastics in April 2010: Notations skyrocket / Numerous triple-digit hikes / Supply tightens / Lively demand / Sharp rises expected again in May
 		06.05.2010
Seite 13 von 18
© 2026 by Plastics Information Europe, Bad Homburg
Date of print: 29/07/2026
Ref: ythrfoip51otdj55ucbfhe45
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?page=13&pageid=700112