Show topic list

Polymer Prices Composites

POLYMER PRICES Composites/GRP April 2021: Resins rise to new heights / Glass-fibre products somewhat higher / Automotive weakness curbs orders / Precursor bottlenecks could drive prices further	07.05.2021
POLYMER PRICES Composites/GRP March 2021: Notations for resins and glass fibre rise / Further upswing likely in April / Strategic buying keeps demand stable	09.04.2021
POLYMER PRICES Composites/GRP February 2021: Resins soar skyward / Spectacular rise likely in March / Upward price momentum slows buying / Glass fibre momentum flat	05.03.2021
POLYMER PRICES Composites/GRP January 2021: Resins prices up sharply / First extreme tightness / Upswing may flatten in February / Glass fibre makes steep strides	05.02.2021
POLYMER PRICES Composites/GRP December 2020: Costly styrene pulls prices higher / Supply tighter due to lack of imports / No end to upswing in January / Steep rise for glass-fibre products	08.01.2021
POLYMER PRICES Composites/GRP November 2020: Ortho resins point upward / Increases already seen / Styrene tight in Europe / Slight rise for glass-fibre roving	07.12.2020
POLYMER PRICES Composites/GRP October 2020: Resins and glass fibre flat / Little impetus from demand side / Minor increases possible at end of November	06.11.2020
POLYMER PRICES Composites/GPR September 2020: Resins rise as feedstocks sink / Demand gradually recovers / Supply varies regionally / Glass fibre eases somewhat	07.10.2020
POLYMER PRICES Composites/GRP August 2020: July firming leaves few traces / Little momentum overall / Glass fibre products also mostly stable	07.09.2020
POLYMER PRICES Composites/GRP July 2020: Resins make up June's dip / Livelier demand meets summer lull / Producers' hike plans for August unlikely to succeed	07.08.2020
POLYMER PRICES Composites/GRP June 2020: Resins lose some ground and may bottom out in July / Market quieter / Most glass fibre products unchanged	07.07.2020
POLYMER PRICES Composites/GRP May 2020: Ortho resins fall again sharply / Producers aggressively cut prices but bottom in sight / Some glass fibre products in oversupply	08.06.2020
POLYMER PRICES Composites/GRP April 2020: Resins crash in April / Chopped strand mats under some pressure / Soft demand claims its due / Downswing may bottom out in May	08.05.2020
POLYMER PRICES Composites/GRP March 2020: Cautious optimism in the market / SM price plunge will pull resin farther downward / Glass fibre unchanged / Cancelled JEC trade fair is a missing catalyst	07.04.2020
POLYMER PRICES Composites/GRP February 2020: Styrene rise pushes prices higher / Demand visibly slowing / Uneven development for glass fibre products	06.03.2020
POLYMER PRICES Composites/GRP January 2020: Ortho resins still pointing downward / Trend likely to turn around soon / Glass fibre oversupply pressures notations	07.02.2020
POLYMER PRICES Composites/GRP December 2019: Market remains stable as the year turns / SM price rise could lead to firming in February / Glass fibre unchanged	08.01.2020
POLYMER PRICES Composites/GRP November 2019: Resins surprisingly stable / Heftier rebates likely in December / Glass fibre prices on the shaky side	06.12.2019
POLYMER PRICES Composites/GRP October 2019: Little movement for ortho resins / Rebates certain in November / Glass fibre moving sideways	07.11.2019
POLYMER PRICES Composites/GRP September 2019: Cautious market leaves ortho resins prices unchanged / Demand remains slack / No movement for glass fibre products	08.10.2019
POLYMER PRICES Composites/GRP August 2019: Resins lose ground despite SM rise / Steep slide for feedstocks / Upswing possible next month / Glass fibre unchanged	06.09.2019
POLYMER PRICES Composites/GRP July 2019: Ortho resins follow styrene downward / Demand recedes / Glass fibre prices still stable / Downward pressure continues	07.08.2019
POLYMER PRICES Composites/GRP June 2019: Resins slip slightly / Demand below expectations / More pronounced downturn seen for July / Glass fibre with minimal movement	05.07.2019
POLYMER PRICES Composites/GRP May 2019: Resins upswing continues in May / SM's price drop in June will create massive pressure / Demand still mostly weak	06.06.2019
POLYMER PRICES Composites/GRP April 2019: Resins prices start to rise / Automotive demand still weak / Glass fibre notations unchanged	08.05.2019

Seite 3 von 8

Topic search

Plastics Information Europe

Polymer Prices (6.053)
- Petrochemicals (488)
- Standard Thermoplastics (963)
- PET (249)
- Engineering Thermoplastics (256)
- Recyclate (370)
  - General (3)
  - Standard Thermoplastics / Recyclate (183)
  - Engineering Thermoplastics / Recyclate (184)
- Polyurethanes (247)
- High Performance Polymers (2)
- Composites (183)
- Announcements (2.575)
- World Regions (583)
  - China (292)
    - Standard Thermoplastics (147)
    - Engineering Thermoplastics (145)
  - North America (167)
  - Russia (124)
- Spot Prices (125)
- Forecasts (12)
Companies (34.503)
- Polymer Materials (17.042)
  - Petrochemicals (3.072)
  - Charge (1.849)
    - General (89)
    - Masterbatches (339)
    - Additives (774)
    - Colours (379)
    - Reinforcements/Fillers (268)
  - Polymers (10.955)
    - General (711)
    - Standard Thermoplastics (3.794)
      - General (113)
      - Polyolefins (1.930)
      - Polystyrenes (335)
      - PVC (662)
      - Polyester (558)
      - Expandable (PS, PP, PE) (196)
    - Technical Thermoplastics (3.231)
      - General (349)
      - Styrene Copolymers (259)
      - PC/PMMA (458)
      - Polyamides (895)
      - POM/PBT/PP (315)
      - Technical Compounds (955)
    - PUR (781)
    - Other (2.438)
      - General (101)
      - Composites/Thermosets (406)
      - High Performance (608)
      - Biopolymers (697)
      - Elastomers/TPE (368)
      - Recyclate (258)
  - Distribution (1.166)
- Machinery (1.086)
  - General (28)
  - Plant Construction (139)
  - Core Machines (740)
    - General (89)
    - Extrusion (180)
    - Injection Moulding (368)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (174)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (93)
    - Components (13)
  - Finishing (5)
- Processing (7.109)
  - General (892)
  - Extrusion (2.333)
    - General (119)
    - Flexible Films (1.127)
    - Rigid Films/Sheet (378)
    - Pipes (349)
    - Profiles/Rods (257)
    - Other (103)
  - Injection Moulding (1.710)
  - Blow Moulding (510)
  - PUR (305)
  - Other (1.121)
    - General (120)
    - Foam (305)
    - Composites/Thermosets (350)
    - Thermoforming (217)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (238)
- Application (7.295)
  - General (128)
  - Packaging (3.152)
  - Construction (720)
  - Automotive / Transport (1.671)
  - Electrical Appliances (335)
  - Consumer Goods (679)
  - Medical (397)
  - Technical (213)
- Other (1.971)
  - Recycling/Disposal (1.585)
  - Services (253)
  - Logistics (133)
Commercial Register (122)
- Insolvency (117)
- Changes (5)
Markets (23.269)
- Polymer Materials (10.062)
  - Petrochemicals (2.471)
  - Charge (855)
    - General (38)
    - Masterbatches (94)
    - Additives (338)
    - Colours (156)
    - Reinforcements/Fillers (229)
  - Polymers (6.353)
    - General (787)
    - Standard Thermoplastics (2.428)
      - General (74)
      - Polyolefins (1.209)
      - Polystyrenes (157)
      - PVC (502)
      - Polyester (346)
      - Expandable (PS, PP, PE) (140)
    - Technical Thermoplastics (1.276)
      - General (87)
      - Styrene Copolymers (105)
      - PC/PMMA (151)
      - Polyamides (438)
      - POM/PBT/PP (110)
      - Technical Compounds (385)
    - PUR (453)
    - Other (1.409)
      - General (47)
      - Composites/Thermosets (292)
      - High Performance (302)
      - Biopolymers (431)
      - Elastomers/TPE (141)
      - Recyclate (196)
  - Other Materials (59)
  - Distribution (324)
- Machinery (507)
  - General (129)
  - Plant Construction (14)
  - Core Machines (293)
    - General (111)
    - Extrusion (37)
    - Injection Moulding (124)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.691)
  - General (430)
  - Extrusion (608)
    - General (20)
    - Flexible Films (297)
    - Rigid Films/Sheets (119)
    - Pipes (72)
    - Profiles/Rods (89)
    - Other (11)
  - Injection Moulding (178)
  - Blow Moulding (43)
  - PUR (81)
  - Other (306)
    - General (20)
    - Foam (79)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.086)
  - General (42)
  - Packaging (1.977)
  - Construction (311)
  - Automotive / Transport (968)
  - Electrical Appliances (219)
  - Consumer Goods (254)
  - Medical (205)
  - Technical (60)
  - Other (50)
- Regions and Countries (4.094)
  - World (195)
  - German-speaking Countries (484)
  - Europe (1.985)
    - General (480)
    - Italy (142)
    - France (155)
    - Spain/Portugal (100)
    - Great Britain/Ireland (507)
    - Low Countries (74)
    - Central Europe (177)
    - Scandinavia (46)
    - Russia (110)
    - Eastern Europe (53)
    - Southeastern Europe (141)
  - North America (489)
  - Asia (678)
    - General (122)
    - China (392)
    - Japan (51)
    - Korea (26)
    - India (87)
  - Middle East (143)
  - Other (39)
  - South America (81)
- Other (2.829)
  - Recycling/Disposal (2.056)
  - Economic Trend (426)
  - Services (41)
  - Logistics (234)
  - Energy (72)
Production and Engineering (3.770)
- Polymer Materials (2.350)
  - Petrochemicals (60)
  - Charge (439)
    - General (14)
    - Masterbatches (111)
    - Additives (226)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.820)
    - General (30)
    - Standard Themoplastics (362)
    - Technical Thermoplastics (600)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (205)
      - POM/PBT/PP (69)
      - Technical Compounds (180)
    - PUR (72)
    - Other (756)
      - General (21)
      - Composites/Thermosets (107)
      - High Performance (160)
      - Biopolymers (245)
      - Elastomers/TPE (114)
      - Recyclate (109)
  - Other (31)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (431)
  - Polymer Materials (144)
  - Technical (13)
  - Product Development (41)
  - Process (82)
  - Application (90)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (57)
- New Products (856)
  - Packaging (565)
  - Construction (35)
  - Automotive / Transport (99)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (7)
  - Other (38)
- Other (39)
Management (713)
- Purchasing (103)
- General Management (159)
- Company organisation (44)
- Marketing/Sales (15)
- Human Resources (7)
- Finances (96)
- Logistics (289)
People (1.496)
Industry (6.117)
- General (1.205)
- Associations/Institutions (2.341)
- Legislation (1.315)
- Environment / Health (1.246)
- plas.TV - Plastics unite(d) (10)
Events (1.146)
Plastic Fantastic (548)
Commentaries (82)
Interviews (141)
Notes by Publisher (72)

Energy Cost Surcharges

Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team

Price survey methodology