Show topic list

Production and Engineering Polymers Technical Thermoplastics

ELECTRIPLAST Electrically conductive hybrid plastics range expanded	17.05.2012
SIEMENS Exhaust gas CO2 as feedstock for new “green” polymer / Cooperation with BASF	16.05.2012
SABIC Additional “Lexan” PC grades introduced / Improved flame retardancy at thin gauges / Light transmission levels in LEDs retained at prolonged high temperature	23.04.2012
A. SCHULMAN Nylon compounds launched for metal replacement applications	19.04.2012
STYRON “Pulse” series of easy flow resins for automotive interiors is extended / Two PC/ABS blends added to cost efficient range	22.03.2012
ARKEMA Ultra-flexible PPA-based resin launched / Extension of Rilsan HT range	27.02.2012
LATI High thermal conductivity PA-based compound introduced	08.02.2012
BADA Two new polyamide compounds introduced	02.02.2012
DUPONT Impact-modified POM for automobile interiors / Low VOC emissions meet industry requirements	10.11.2011
TICONA New enhanced-resistance POM competes with PA / Automotive applications targeted	08.11.2011
ENSINGER Bubble-containing plastic developed for lightweight construction / Detectable plastic launched for food industry	01.11.2011
BASF “Ultramid Endure D3G10” shown at Fakuma	26.10.2011
BASF New automotive impact-modified PA 6 grades introduced	17.10.2011
TEKNOR APEX New cable jacketing launched at Bangkok show / Superior protection in industrial settings claimed	15.09.2011
RTP Glass fibre-reinforced bioplastic PLA with improved strength and thermal performance / Injection moulding cycle times reduced	23.08.2011
STYRON Chemical resistant PC/PET blend introduced for medical housings	22.08.2011
THYSSENKRUPP New pilot plant for steel-polyamide sandwich plates in Germany	04.07.2011
RADICI New "Radilon" engineering plastics solutions	29.06.2011
SABIC INNOVATIVE PLASTICS Custom-colourable compound for LDS processing	15.06.2011
LONG FIBRE THERMOPLASTICS LFT PP compounds retain mechanical properties in large structural components / Dutch consortium development	13.06.2011
LANXESS “Durethan” polyamide 6 grade meets European “Hazard Level 3” specifications / Suitable for rail vehicle equipment applications	10.06.2011
SABIC New transparent polycarbonate resin / “Sabic PC” will be marketed alongside traditional “Lexan”	03.06.2011
DSM Cooperation with Elevance Renewable Sciences on bio-based high performance thermoplastics	19.05.2011
SABIC INNOVATIVE PLASTICS Automotive cooperation with Germany's IAV / New thermoplastics for electric vehicles	06.05.2011
LANXESS PA 6 alternative to HDPE in gasoline fuel tanks	20.04.2011

Seite 16 von 22

Topic search

Plastics Information Europe

Polymer Prices (6.333)
- Petrochemicals (563)
- Standard Thermoplastics (1.017)
- PET (258)
- Engineering Thermoplastics (266)
- Recyclate (393)
  - General (6)
  - Standard Thermoplastics / Recyclate (193)
  - Engineering Thermoplastics / Recyclate (194)
- Polyurethanes (258)
- High Performance Polymers (2)
- Composites (192)
- Announcements (2.617)
- World Regions (611)
  - China (310)
    - Standard Thermoplastics (156)
    - Engineering Thermoplastics (154)
  - North America (177)
  - Russia (124)
- Spot Prices (134)
- Forecasts (22)
Companies (36.047)
- Polymer Materials (17.746)
  - Petrochemicals (3.219)
  - Charge (1.910)
    - General (99)
    - Masterbatches (342)
    - Additives (805)
    - Colours (391)
    - Reinforcements/Fillers (273)
  - Polymers (11.421)
    - General (738)
    - Standard Thermoplastics (3.961)
      - General (113)
      - Polyolefins (2.015)
      - Polystyrenes (355)
      - PVC (694)
      - Polyester (578)
      - Expandable (PS, PP, PE) (206)
    - Technical Thermoplastics (3.352)
      - General (352)
      - Styrene Copolymers (269)
      - PC/PMMA (474)
      - Polyamides (948)
      - POM/PBT/PP (326)
      - Technical Compounds (983)
    - PUR (810)
    - Other (2.560)
      - General (105)
      - Composites/Thermosets (414)
      - High Performance (639)
      - Biopolymers (713)
      - Elastomers/TPE (382)
      - Recyclate (307)
  - Distribution (1.196)
- Machinery (1.124)
  - General (31)
  - Plant Construction (144)
  - Core Machines (761)
    - General (92)
    - Extrusion (182)
    - Injection Moulding (382)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (183)
    - General (33)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (99)
    - Components (13)
  - Finishing (5)
- Processing (7.397)
  - General (925)
  - Extrusion (2.417)
    - General (128)
    - Flexible Films (1.171)
    - Rigid Films/Sheet (391)
    - Pipes (357)
    - Profiles/Rods (263)
    - Other (107)
  - Injection Moulding (1.792)
  - Blow Moulding (529)
  - PUR (329)
  - Other (1.159)
    - General (128)
    - Foam (316)
    - Composites/Thermosets (357)
    - Thermoforming (228)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (246)
- Application (7.614)
  - General (135)
  - Packaging (3.292)
  - Construction (752)
  - Automotive / Transport (1.743)
  - Electrical Appliances (354)
  - Consumer Goods (702)
  - Medical (412)
  - Technical (224)
- Other (2.166)
  - Recycling/Disposal (1.734)
  - Services (260)
  - Logistics (172)
Commercial Register (160)
- Insolvency (155)
- Changes (5)
Markets (24.537)
- Polymer Materials (10.590)
  - Petrochemicals (2.605)
  - Charge (881)
    - General (39)
    - Masterbatches (98)
    - Additives (349)
    - Colours (162)
    - Reinforcements/Fillers (233)
  - Polymers (6.702)
    - General (860)
    - Standard Thermoplastics (2.530)
      - General (74)
      - Polyolefins (1.266)
      - Polystyrenes (166)
      - PVC (519)
      - Polyester (362)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.345)
      - General (89)
      - Styrene Copolymers (114)
      - PC/PMMA (161)
      - Polyamides (471)
      - POM/PBT/PP (114)
      - Technical Compounds (396)
    - PUR (477)
    - Other (1.490)
      - General (47)
      - Composites/Thermosets (301)
      - High Performance (313)
      - Biopolymers (440)
      - Elastomers/TPE (147)
      - Recyclate (242)
  - Other Materials (61)
  - Distribution (341)
- Machinery (524)
  - General (131)
  - Plant Construction (14)
  - Core Machines (307)
    - General (117)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.749)
  - General (459)
  - Extrusion (628)
    - General (20)
    - Flexible Films (305)
    - Rigid Films/Sheets (126)
    - Pipes (75)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (181)
  - Blow Moulding (43)
  - PUR (84)
  - Other (309)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.327)
  - General (51)
  - Packaging (2.093)
  - Construction (338)
  - Automotive / Transport (1.012)
  - Electrical Appliances (230)
  - Consumer Goods (274)
  - Medical (213)
  - Technical (62)
  - Other (54)
- Regions and Countries (4.191)
  - World (196)
  - German-speaking Countries (498)
  - Europe (2.047)
    - General (505)
    - Italy (145)
    - France (155)
    - Spain/Portugal (105)
    - Great Britain/Ireland (521)
    - Low Countries (75)
    - Central Europe (180)
    - Scandinavia (46)
    - Russia (115)
    - Eastern Europe (57)
    - Southeastern Europe (143)
  - North America (498)
  - Asia (682)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (148)
  - Other (40)
  - South America (82)
- Other (3.156)
  - Recycling/Disposal (2.244)
  - Economic Trend (517)
  - Services (41)
  - Logistics (272)
  - Energy (82)
Production and Engineering (3.842)
- Polymer Materials (2.394)
  - Petrochemicals (63)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.855)
    - General (31)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (74)
    - Other (775)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (161)
      - Biopolymers (252)
      - Elastomers/TPE (115)
      - Recyclate (116)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (443)
  - Polymer Materials (145)
  - Technical (16)
  - Product Development (42)
  - Process (83)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (871)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (39)
Management (797)
- Purchasing (108)
- General Management (190)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (100)
- Logistics (331)
People (1.514)
Industry (6.558)
- General (1.273)
- Associations/Institutions (2.497)
- Legislation (1.453)
- Environment / Health (1.325)
- plas.TV - Plastics unite(d) (10)
Events (1.174)
Plastic Fantastic (575)
Commentaries (85)
Interviews (159)
Notes by Publisher (79)