Show topic list

Companies Polymers Technical Thermoplastics

CELANESE Plastics segment improves on previous quarter / Headwinds expected in Q3	14.08.2025
ARKEMA French chemicals group issues profit warning / Cost-cutting efforts to be intensified	11.08.2025
TRINSEO Plastics group slips deeper into red / Bleak outlook for year as a whole	07.08.2025
EASTMAN Q2 EBIT falls by over one fifth; focus shifts to cost cuts / Plans to increase US chemical recycling capacity by 30%	07.08.2025
COVESTRO Plastics group stays in the red / Economic conditions remain challenging	31.07.2025
BASF Q2 profit, sales at Chemicals hit considerably / HMD plant in France now operational	30.07.2025
COVESTRO European Commission launches investigation on Adnoc deal	29.07.2025
SUMITOMO BAKELITE Polycarbonate sheet business acquired from AGC	29.07.2025
GRUPA AZOTY Orlen backtracks on decision to buy polyolefin division	21.07.2025
ARKEMA French group to expand transparent PA 11 capacity in Singapore	17.07.2025
BASF Group issues profit warning / Q2 sales down by over 2%	15.07.2025
ABS EU decision on provisional anti-dumping measures on imports from South Korea, Taiwan imminent / Risks from possible retroactive duties	15.07.2025
EMS-CHEMIE H1 results confirm unbroken growth trend / Little effect anticipated from tariffs	15.07.2025
COVESTRO Outlook for 2025 downgraded yet again / Preliminary Q2 core profit seen down 16%	14.07.2025
ECOBAT Sale of auto battery, PP recycling business in Italy to Haiki	11.07.2025
COVESTRO EU to review Adnoc purchase under antitrust law / Will deal be overturned last minute?	09.07.2025
ALIPLAST Italian recycler acquired by Gruppo Hera's Herambiente	04.07.2025
BASF Sale of XPS insulation board business to Bachl closed / Purchase of 49% share in Domo's Alsachimie JV finalised	04.07.2025
ECOCORTEC Manufacturer of corrosion-protection packaging expands Croatian plant	02.07.2025
COVESTRO Acquisition of Swiss film manufacturer Pontacol	26.06.2025
RÖHM MMA plant in US expected to be fully operational by year-end / Start-up problems attributed to intermediate products' supply shortage	23.06.2025
BASF USD 700,000 settlement with EPA over alleged TSCA violations	20.06.2025
ASCEND Brand new HMD plant in China shuttered	18.06.2025
COVESTRO Adnoc acquisition inches close to approval	18.06.2025
BASF Commissioning of HMD plant in France / Expansion in Germany reportedly nearing completion	16.06.2025

Seite 1 von 108

Topic search

Plastics Information Europe

Polymer Prices (6.088)
- Petrochemicals (499)
- Standard Thermoplastics (970)
- PET (250)
- Engineering Thermoplastics (257)
- Recyclate (372)
  - General (3)
  - Standard Thermoplastics / Recyclate (184)
  - Engineering Thermoplastics / Recyclate (185)
- Polyurethanes (248)
- High Performance Polymers (2)
- Composites (184)
- Announcements (2.577)
- World Regions (589)
  - China (296)
    - Standard Thermoplastics (149)
    - Engineering Thermoplastics (147)
  - North America (169)
  - Russia (124)
- Spot Prices (126)
- Forecasts (14)
Companies (34.771)
- Polymer Materials (17.176)
  - Petrochemicals (3.102)
  - Charge (1.857)
    - General (89)
    - Masterbatches (340)
    - Additives (778)
    - Colours (381)
    - Reinforcements/Fillers (269)
  - Polymers (11.048)
    - General (716)
    - Standard Thermoplastics (3.830)
      - General (113)
      - Polyolefins (1.946)
      - Polystyrenes (340)
      - PVC (669)
      - Polyester (563)
      - Expandable (PS, PP, PE) (199)
    - Technical Thermoplastics (3.253)
      - General (349)
      - Styrene Copolymers (261)
      - PC/PMMA (463)
      - Polyamides (903)
      - POM/PBT/PP (319)
      - Technical Compounds (958)
    - PUR (789)
    - Other (2.460)
      - General (101)
      - Composites/Thermosets (410)
      - High Performance (614)
      - Biopolymers (700)
      - Elastomers/TPE (369)
      - Recyclate (266)
  - Distribution (1.169)
- Machinery (1.089)
  - General (28)
  - Plant Construction (139)
  - Core Machines (743)
    - General (90)
    - Extrusion (181)
    - Injection Moulding (369)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (174)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (93)
    - Components (13)
  - Finishing (5)
- Processing (7.158)
  - General (896)
  - Extrusion (2.348)
    - General (123)
    - Flexible Films (1.132)
    - Rigid Films/Sheet (381)
    - Pipes (350)
    - Profiles/Rods (258)
    - Other (104)
  - Injection Moulding (1.723)
  - Blow Moulding (518)
  - PUR (310)
  - Other (1.125)
    - General (120)
    - Foam (306)
    - Composites/Thermosets (352)
    - Thermoforming (218)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (238)
- Application (7.346)
  - General (129)
  - Packaging (3.174)
  - Construction (727)
  - Automotive / Transport (1.685)
  - Electrical Appliances (337)
  - Consumer Goods (681)
  - Medical (400)
  - Technical (213)
- Other (2.002)
  - Recycling/Disposal (1.608)
  - Services (254)
  - Logistics (140)
Commercial Register (128)
- Insolvency (123)
- Changes (5)
Markets (23.493)
- Polymer Materials (10.152)
  - Petrochemicals (2.493)
  - Charge (862)
    - General (38)
    - Masterbatches (95)
    - Additives (341)
    - Colours (158)
    - Reinforcements/Fillers (230)
  - Polymers (6.412)
    - General (800)
    - Standard Thermoplastics (2.446)
      - General (74)
      - Polyolefins (1.218)
      - Polystyrenes (158)
      - PVC (505)
      - Polyester (350)
      - Expandable (PS, PP, PE) (141)
    - Technical Thermoplastics (1.285)
      - General (87)
      - Styrene Copolymers (108)
      - PC/PMMA (154)
      - Polyamides (441)
      - POM/PBT/PP (110)
      - Technical Compounds (385)
    - PUR (460)
    - Other (1.421)
      - General (47)
      - Composites/Thermosets (295)
      - High Performance (303)
      - Biopolymers (432)
      - Elastomers/TPE (141)
      - Recyclate (203)
  - Other Materials (59)
  - Distribution (326)
- Machinery (508)
  - General (129)
  - Plant Construction (14)
  - Core Machines (294)
    - General (111)
    - Extrusion (37)
    - Injection Moulding (125)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.708)
  - General (436)
  - Extrusion (617)
    - General (20)
    - Flexible Films (299)
    - Rigid Films/Sheets (123)
    - Pipes (74)
    - Profiles/Rods (90)
    - Other (11)
  - Injection Moulding (179)
  - Blow Moulding (43)
  - PUR (81)
  - Other (307)
    - General (20)
    - Foam (80)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.124)
  - General (44)
  - Packaging (1.994)
  - Construction (317)
  - Automotive / Transport (974)
  - Electrical Appliances (220)
  - Consumer Goods (256)
  - Medical (207)
  - Technical (60)
  - Other (52)
- Regions and Countries (4.117)
  - World (195)
  - German-speaking Countries (486)
  - Europe (2.002)
    - General (487)
    - Italy (144)
    - France (155)
    - Spain/Portugal (100)
    - Great Britain/Ireland (511)
    - Low Countries (74)
    - Central Europe (179)
    - Scandinavia (46)
    - Russia (111)
    - Eastern Europe (54)
    - Southeastern Europe (141)
  - North America (492)
  - Asia (679)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (26)
    - India (87)
  - Middle East (143)
  - Other (39)
  - South America (81)
- Other (2.884)
  - Recycling/Disposal (2.091)
  - Economic Trend (441)
  - Services (41)
  - Logistics (240)
  - Energy (71)
Production and Engineering (3.782)
- Polymer Materials (2.358)
  - Petrochemicals (60)
  - Charge (441)
    - General (14)
    - Masterbatches (112)
    - Additives (227)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.826)
    - General (30)
    - Standard Themoplastics (364)
    - Technical Thermoplastics (601)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (206)
      - POM/PBT/PP (69)
      - Technical Compounds (180)
    - PUR (72)
    - Other (759)
      - General (21)
      - Composites/Thermosets (108)
      - High Performance (160)
      - Biopolymers (246)
      - Elastomers/TPE (114)
      - Recyclate (110)
  - Other (31)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (433)
  - Polymer Materials (144)
  - Technical (14)
  - Product Development (41)
  - Process (82)
  - Application (90)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (858)
  - Packaging (566)
  - Construction (35)
  - Automotive / Transport (99)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (8)
  - Other (38)
- Other (39)
Management (725)
- Purchasing (103)
- General Management (165)
- Company organisation (44)
- Marketing/Sales (15)
- Human Resources (7)
- Finances (96)
- Logistics (295)
People (1.498)
Industry (6.209)
- General (1.219)
- Associations/Institutions (2.367)
- Legislation (1.347)
- Environment / Health (1.266)
- plas.TV - Plastics unite(d) (10)
Events (1.149)
Plastic Fantastic (552)
Commentaries (82)
Interviews (143)
Notes by Publisher (72)