Show topic list

Polymer Prices Polyurethanes

POLYMER PRICES Polyurethane Feedstocks February 2015: Declines, some of them substantial, across the board / Supply normal to long / Downswing likely to bottom out in March	23.02.2015
POLYMER PRICES Polyurethane Feedstocks January 2015: All materials except rigid polyols follow feedstocks downward / Demand revives only slowly / Further deterioration expected in February	21.01.2015
POLYMER PRICES Polyurethane Feedstocks December 2014: MDI declines slightly / TDI rolls over / Polyols stable / PO tightness eases / More corrections likely / Demand slack at year end	18.12.2014
POLYMER PRICES Polyurethane feedstocks November 2014: Moerdijk shortfall pushes polyols up / Propylene oxide extremely tight / MDI und TDI softer / Aromatics slide not yet reflected / Corrections likely	21.11.2014
POLYMER PRICES Polyurethane Feedstocks October 2014: Little price movement / MDI gives up slight ground / TDI uneven / Polyols mostly stable / Standstill in Moerdijk makes the market jittery	22.10.2014
POLYMER PRICES Polyurethane Feedstocks September 2014: Both MDI grades lose ground / TDI firmer despite toluene's fall / Polyols react to PO outage in The Netherlands / Only polyols now pointing upward	22.09.2014
POLYMER PRICES Polyurethane feedstocks August 2014: MDI loses ground / Notations for TDI and flexible polyols rise / Summer holidays depress demand / Little scope for rebates in September	22.08.2014
POLYMER PRICES Polyurethane feedstocks July 2014: Only MDI remains stable / TDI and polyols make gains / Upward pressure persists / Moerdijk outage still being felt	24.07.2014
POLYMER PRICES Polyurethane Feedstocks June 2014: Notations largely sideways, but rigid polyols firm / July could see all-round hikes / Iraq hostilities drive oil and petrochemicals higher	23.06.2014
POLYMER PRICES Polyurethane feedstocks May 2014: MDI and polyols decline / Oversupplied TDI loses further ground and remains under pressure / Firming likely in June	22.05.2014
POLYMER PRICES Polyurethane feedstocks April 2014: Tight supply prompts upsurge for MDI and polyols / Downtrend for long TDI continues / Strong demand could push notations above the cost rise	23.04.2014
POLYMER PRICES Polyurethane feedstocks March 2014: Price trend begins turning around / MDI and polyols mostly firm / TDI points down slightly / Producers seek to pass on cumulative cost rise / Hikes likely in April	24.03.2014
POLYMER PRICES Polyurethane feedstocks February 2014: MDI sees slight upward momentum / TDI down sharply / Polyols rise on higher olefins / Flat cost curve and livelier demand will stabilise market	21.02.2014
POLYMER PRICES Polyurethane feedstocks January 2014: Producers again unable to pass on higher benzene prices / Demand still subdued, but spring awakening on the horizon / Price hikes increasingly likely	21.01.2014
POLYMER PRICES Polyurethane feedstocks December 2013: Production costs still rising but polymer largely stable / Supply tight and prices weak / Trend looks likely to continue in January 2014	16.12.2013
POLYMER PRICES Polyurethane feedstocks November 2013: Only specialities see hikes / Cost declines help producer margins / Building season ends / Some products tight / Further deterioration possible	22.11.2013
POLYMER PRICES Polyurethane feedstocks October 2013: Upward pressure holds up / Only TDI sees substantial hikes / Building season wanes / Trend points downward but footwear keeps pure MDI robust	24.10.2013
POLYMER PRICES Polyurethane feedstocks September 2013: Higher raw material costs drive notations up / Increases rarely exceed rising costs / Demand mostly soft / Prices likely to move sideways in October	23.09.2013
POLYMER PRICES Polyurethane feedstocks August 2013: Bottoming out of prices for TDI and polyols / Polymeric MDI in rollover / Short supply of pure MDI drives notations / Demand remains weak / Cost increases foreseeable	23.08.2013
POLYMER PRICES Polyurethane feedstocks July 2013: Rebates predominate / Only pure MDI stable / Poor seasonal demand leads to stock-building / Hike plans with little chance of acceptance	24.07.2013
POLYMER PRICES Polyurethane feedstocks June 2013: MDI stable despite slack building activity / TDI and polyols crumble further / Clear trend to oversupply / Weak demand from automotive / Price pressure persists	21.06.2013
POLYMER PRICES Polyurethane feedstocks May 2013: Solid benzene price stabilises MDI / TDI and Polyole down / Public holidays slow down orders / Demand below expectations / Increase effect Upstream	23.05.2013
POLYMER PRICES Polyurethane feedstocks April 2013: Global weakening of European petchems creates downward pressure / Demand falls as supply lengthens / Trend likely to continue	23.04.2013
POLYMER PRICES Polyurethane feedstocks in March 2013: MDI and TDI sideways / Olefins pull polyols up / Prompt supply despite maintenance / Weather pressures demand / Building season and new quarter could drive	21.03.2013
POLYMER PRICES Polyurethane feedstocks in February 2013: Steep hike plans firm the market / MDI and TDI with slight gains / No supply bottlenecks despite maintenance / Order volume still flat / Seasonal demand could drive prices	21.02.2013

Seite 6 von 10

Topic search

Plastics Information Europe

Polymer Prices (6.042)
- Petrochemicals (485)
- Standard Thermoplastics (959)
- PET (248)
- Engineering Thermoplastics (255)
- Recyclate (370)
  - General (3)
  - Standard Thermoplastics / Recyclate (183)
  - Engineering Thermoplastics / Recyclate (184)
- Polyurethanes (247)
- High Performance Polymers (2)
- Composites (182)
- Announcements (2.574)
- World Regions (583)
  - China (292)
    - Standard Thermoplastics (147)
    - Engineering Thermoplastics (145)
  - North America (167)
  - Russia (124)
- Spot Prices (125)
- Forecasts (12)
Companies (34.486)
- Polymer Materials (17.036)
  - Petrochemicals (3.071)
  - Charge (1.849)
    - General (89)
    - Masterbatches (339)
    - Additives (774)
    - Colours (379)
    - Reinforcements/Fillers (268)
  - Polymers (10.950)
    - General (710)
    - Standard Thermoplastics (3.793)
      - General (113)
      - Polyolefins (1.930)
      - Polystyrenes (335)
      - PVC (662)
      - Polyester (557)
      - Expandable (PS, PP, PE) (196)
    - Technical Thermoplastics (3.230)
      - General (349)
      - Styrene Copolymers (259)
      - PC/PMMA (458)
      - Polyamides (895)
      - POM/PBT/PP (315)
      - Technical Compounds (954)
    - PUR (781)
    - Other (2.436)
      - General (101)
      - Composites/Thermosets (406)
      - High Performance (608)
      - Biopolymers (696)
      - Elastomers/TPE (368)
      - Recyclate (257)
  - Distribution (1.166)
- Machinery (1.085)
  - General (28)
  - Plant Construction (138)
  - Core Machines (740)
    - General (89)
    - Extrusion (180)
    - Injection Moulding (368)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (174)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (93)
    - Components (13)
  - Finishing (5)
- Processing (7.106)
  - General (892)
  - Extrusion (2.331)
    - General (119)
    - Flexible Films (1.125)
    - Rigid Films/Sheet (378)
    - Pipes (349)
    - Profiles/Rods (257)
    - Other (103)
  - Injection Moulding (1.709)
  - Blow Moulding (510)
  - PUR (305)
  - Other (1.121)
    - General (120)
    - Foam (305)
    - Composites/Thermosets (350)
    - Thermoforming (217)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (238)
- Application (7.293)
  - General (128)
  - Packaging (3.150)
  - Construction (720)
  - Automotive / Transport (1.671)
  - Electrical Appliances (336)
  - Consumer Goods (679)
  - Medical (396)
  - Technical (213)
- Other (1.966)
  - Recycling/Disposal (1.581)
  - Services (253)
  - Logistics (132)
Commercial Register (122)
- Insolvency (117)
- Changes (5)
Markets (23.254)
- Polymer Materials (10.057)
  - Petrochemicals (2.470)
  - Charge (855)
    - General (38)
    - Masterbatches (94)
    - Additives (338)
    - Colours (156)
    - Reinforcements/Fillers (229)
  - Polymers (6.349)
    - General (786)
    - Standard Thermoplastics (2.426)
      - General (74)
      - Polyolefins (1.207)
      - Polystyrenes (157)
      - PVC (502)
      - Polyester (346)
      - Expandable (PS, PP, PE) (140)
    - Technical Thermoplastics (1.276)
      - General (87)
      - Styrene Copolymers (105)
      - PC/PMMA (151)
      - Polyamides (438)
      - POM/PBT/PP (110)
      - Technical Compounds (385)
    - PUR (453)
    - Other (1.408)
      - General (47)
      - Composites/Thermosets (292)
      - High Performance (302)
      - Biopolymers (431)
      - Elastomers/TPE (141)
      - Recyclate (195)
  - Other Materials (59)
  - Distribution (324)
- Machinery (506)
  - General (128)
  - Plant Construction (14)
  - Core Machines (293)
    - General (111)
    - Extrusion (37)
    - Injection Moulding (124)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.690)
  - General (430)
  - Extrusion (607)
    - General (20)
    - Flexible Films (296)
    - Rigid Films/Sheets (119)
    - Pipes (72)
    - Profiles/Rods (89)
    - Other (11)
  - Injection Moulding (178)
  - Blow Moulding (43)
  - PUR (81)
  - Other (306)
    - General (20)
    - Foam (79)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.084)
  - General (42)
  - Packaging (1.975)
  - Construction (311)
  - Automotive / Transport (968)
  - Electrical Appliances (219)
  - Consumer Goods (254)
  - Medical (205)
  - Technical (60)
  - Other (50)
- Regions and Countries (4.092)
  - World (195)
  - German-speaking Countries (483)
  - Europe (1.984)
    - General (479)
    - Italy (142)
    - France (155)
    - Spain/Portugal (100)
    - Great Britain/Ireland (507)
    - Low Countries (74)
    - Central Europe (177)
    - Scandinavia (46)
    - Russia (110)
    - Eastern Europe (53)
    - Southeastern Europe (141)
  - North America (489)
  - Asia (678)
    - General (122)
    - China (392)
    - Japan (51)
    - Korea (26)
    - India (87)
  - Middle East (143)
  - Other (39)
  - South America (81)
- Other (2.825)
  - Recycling/Disposal (2.053)
  - Economic Trend (426)
  - Services (41)
  - Logistics (233)
  - Energy (72)
Production and Engineering (3.769)
- Polymer Materials (2.349)
  - Petrochemicals (60)
  - Charge (439)
    - General (14)
    - Masterbatches (111)
    - Additives (226)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.819)
    - General (30)
    - Standard Themoplastics (362)
    - Technical Thermoplastics (599)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (63)
      - Polyamides (205)
      - POM/PBT/PP (69)
      - Technical Compounds (180)
    - PUR (72)
    - Other (756)
      - General (21)
      - Composites/Thermosets (107)
      - High Performance (160)
      - Biopolymers (245)
      - Elastomers/TPE (114)
      - Recyclate (109)
  - Other (31)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (431)
  - Polymer Materials (144)
  - Technical (13)
  - Product Development (41)
  - Process (82)
  - Application (90)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (57)
- New Products (856)
  - Packaging (565)
  - Construction (35)
  - Automotive / Transport (99)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (7)
  - Other (38)
- Other (39)
Management (712)
- Purchasing (103)
- General Management (159)
- Company organisation (44)
- Marketing/Sales (15)
- Human Resources (7)
- Finances (96)
- Logistics (288)
People (1.496)
Industry (6.109)
- General (1.204)
- Associations/Institutions (2.339)
- Legislation (1.312)
- Environment / Health (1.244)
- plas.TV - Plastics unite(d) (10)
Events (1.146)
Plastic Fantastic (546)
Commentaries (82)
Interviews (141)
Notes by Publisher (72)

Energy Cost Surcharges

Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team

Price survey methodology