Show topic list

Polymer Prices Engineering Thermoplastics

POLYMER PRICES Engineering Thermoplastics January 2018: Notations shoot up / Worst fears come true / Triple-digit increases / Customers on allocation everywhere / Delivery times lengthen significantly / No end in sight to the drama	06.02.2018
POLYMER PRICES Engineering Thermoplastics December 2017: Prices take off / Ascent has begun / Cost pressure and bottlenecks will continue to drive notations this month / Buyers increasingly desperate in search for material	05.01.2018
POLYMER PRICES Engineering Thermoplastics November 2017: Fresh price rally in the offing / Initial rises for nearly all types / Supply becomes tighter / Increasing feedstock costs will drive prices up further in December	06.12.2017
POLYMER PRICES Engineering Thermoplastics October 2017: Market tends firm / Minor falls with PC and PA 6 / Prices otherwise stable and trending upwards / November expected to continue firmer	03.11.2017
POLYMER PRICES Engineering Thermoplastics September 2017: Quite varied picture / Price cuts with PC and PA 6 / Further substantial increases with PMMA and now also with PBT / Trends likely to continue in October	06.10.2017
POLYMER PRICES Engineering Thermoplastics August 2017: Generally quiet summer month / Stability dominates with traditional materials / Situation with PMMA becomes increasingly dramatic / Upward pressure mounts on a broad front	06.09.2017
POLYMER PRICES Engineering Thermoplastics July 2017: Declining demand removes much of the pressure from possible price hikes / Rollovers dominate the picture / PMMA shoots up and is the exception / Summer lull will hit home in August	04.08.2017
POLYMER PRICES Engineering Thermoplastics June 2017: June rollover repeats itself in July / Exception is PMMA that goes through the roof due to dramatic shortage of MMA / Subdued demand in the holiday period puts pressure on prices	06.07.2017
POLYMER PRICES Engineering Thermoplastics May 2017: Rollover predominates / Tight supply situation still exists with PC, POM and PMMA / Potential upward trend even before start of Q3 / Demand expected to slow down a little	07.06.2017
POLYMER PRICES Engineering Thermoplastics April 2017: Wave of increases rolls on through the market / Rises smaller than in March / Market tending tight / Some delivery times lengthen significantly / Effects could last into May	05.05.2017
POLYMER PRICES Engineering Thermoplastics March 2017: Market swamped by wave of price hikes / Polyamide notations skyrocket / Further increases expected in April / Upward pressure will continue	06.04.2017
POLYMER PRICES Engineering Thermoplastics February 2017: Cost explosion sends shock waves through the market / Polyamides make a triple-digit leap / Step-by-step implementation of quarterly increases / Rally to continue	06.03.2017
POLYMER PRICES Engineering Thermoplastics January 2017: Growing sense of a new beginning / Exploding petrochemical prices in Asia send shock waves around the world / Initial signs of an upward move / Major increases expected in February	06.02.2017
POLYMER PRICES Polyamide: Caprolactam price explosion drives PA 6 up / Rise in butadiene lifts PA 6.6 / Producers launch calls for significant increases	13.01.2017
POLYMER PRICES Engineering Thermoplastics December 2016: Little movement as the year draws to a close / PMMA continues to rise / Producers plan January offensive / Rising costs / Price hikes highly probable	05.01.2017
POLYMER PRICES Engineering Thermoplastics November 2016: Minor movement for traditional materials / Only PMMA trending up / Buyers and producers agree on truce until year's end / Suppliers preparing for a January offensive	06.12.2016
POLYMER PRICES Engineering Thermoplastics October 2016: New quarter begins on stable footing / Slight declines limited to PA 6 and POM / Producers' calls for hikes fall on deaf ears / Little price movement expected for November	04.11.2016
POLYMER PRICES Engineering Thermoplastics September 2016: Problems with PC and PA 6 give way to stability / PA 6.6 and POM point down / PBT mostly calm / PMMA under upward pressure / October likely to be a mixed bag	07.10.2016
POLYMER PRICES Engineering Thermoplastics August 2016: Downward pressure on PC and PA 6 unabated / PA 6.6, PBT and POM stabilise / PMMA points higher / Trends continue / Automotive weak	06.09.2016
POLYMER PRICES Engineering Thermoplastics July 2016: Prices mostly stable / POM slumps / Latent rumbling on polyamide and PMMA cost front / Holiday month of August likely to remain calm / More intensive discussions expected in autumn	04.08.2016
POLYMER PRICES Engineering Thermoplastics June 2016: Little movement on the market in general / Minor corrections at best / Mostly business as usual / Despite slight rise in costs, no incentive for hikes in July	06.07.2016
POLYMER PRICES Engineering Thermoplastics May 2016: Upturn increasingly palpable / Initial rises already implemented / Quarterly negotiations looming / Cost increases force producers' hands in calling for hikes	06.06.2016
POLYMER PRICES Engineering Thermoplastics April 2016: Notations stabilise, as expected / Initial hikes for PC / Decline for polyamides and erosion in PBT and POM comes to an end / Upward trend in May	05.05.2016
POLYMER PRICES Engineering Thermoplastics March 2016: Notations fall again / Reductions in Q1 agreements factored into monthly transactions / Turnaround seems imminent / Rising feedstock prices have firming impact	06.04.2016
POLYMER PRICES Engineering Thermoplastics February 2016: Downtrend gains momentum / Cost reductions meet strong output, imports and weakening demand / Price pressure to continue in March	04.03.2016

Seite 5 von 11

Topic search

Plastics Information Europe

Polymer Prices (6.211)
- Petrochemicals (532)
- Standard Thermoplastics (996)
- PET (254)
- Engineering Thermoplastics (262)
- Recyclate (387)
  - General (6)
  - Standard Thermoplastics / Recyclate (190)
  - Engineering Thermoplastics / Recyclate (191)
- Polyurethanes (255)
- High Performance Polymers (2)
- Composites (188)
- Announcements (2.584)
- World Regions (601)
  - China (304)
    - Standard Thermoplastics (153)
    - Engineering Thermoplastics (151)
  - North America (173)
  - Russia (124)
- Spot Prices (131)
- Forecasts (19)
Companies (35.532)
- Polymer Materials (17.506)
  - Petrochemicals (3.167)
  - Charge (1.887)
    - General (94)
    - Masterbatches (342)
    - Additives (793)
    - Colours (387)
    - Reinforcements/Fillers (271)
  - Polymers (11.263)
    - General (727)
    - Standard Thermoplastics (3.903)
      - General (113)
      - Polyolefins (1.987)
      - Polystyrenes (349)
      - PVC (682)
      - Polyester (569)
      - Expandable (PS, PP, PE) (203)
    - Technical Thermoplastics (3.311)
      - General (350)
      - Styrene Copolymers (264)
      - PC/PMMA (471)
      - Polyamides (928)
      - POM/PBT/PP (322)
      - Technical Compounds (976)
    - PUR (803)
    - Other (2.519)
      - General (102)
      - Composites/Thermosets (413)
      - High Performance (631)
      - Biopolymers (708)
      - Elastomers/TPE (376)
      - Recyclate (289)
  - Distribution (1.189)
- Machinery (1.114)
  - General (30)
  - Plant Construction (143)
  - Core Machines (755)
    - General (91)
    - Extrusion (181)
    - Injection Moulding (379)
    - Blow Moulding (72)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (181)
    - General (32)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (98)
    - Components (13)
  - Finishing (5)
- Processing (7.298)
  - General (912)
  - Extrusion (2.385)
    - General (125)
    - Flexible Films (1.153)
    - Rigid Films/Sheet (387)
    - Pipes (353)
    - Profiles/Rods (260)
    - Other (107)
  - Injection Moulding (1.773)
  - Blow Moulding (523)
  - PUR (321)
  - Other (1.143)
    - General (124)
    - Foam (312)
    - Composites/Thermosets (355)
    - Thermoforming (223)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (241)
- Application (7.515)
  - General (132)
  - Packaging (3.242)
  - Construction (740)
  - Automotive / Transport (1.725)
  - Electrical Appliances (352)
  - Consumer Goods (697)
  - Medical (407)
  - Technical (220)
- Other (2.099)
  - Recycling/Disposal (1.684)
  - Services (257)
  - Logistics (158)
Commercial Register (147)
- Insolvency (142)
- Changes (5)
Markets (24.115)
- Polymer Materials (10.408)
  - Petrochemicals (2.557)
  - Charge (872)
    - General (38)
    - Masterbatches (97)
    - Additives (345)
    - Colours (161)
    - Reinforcements/Fillers (231)
  - Polymers (6.582)
    - General (837)
    - Standard Thermoplastics (2.489)
      - General (74)
      - Polyolefins (1.246)
      - Polystyrenes (162)
      - PVC (510)
      - Polyester (356)
      - Expandable (PS, PP, PE) (141)
    - Technical Thermoplastics (1.320)
      - General (88)
      - Styrene Copolymers (108)
      - PC/PMMA (160)
      - Polyamides (457)
      - POM/PBT/PP (113)
      - Technical Compounds (394)
    - PUR (473)
    - Other (1.463)
      - General (47)
      - Composites/Thermosets (299)
      - High Performance (311)
      - Biopolymers (436)
      - Elastomers/TPE (144)
      - Recyclate (226)
  - Other Materials (60)
  - Distribution (337)
- Machinery (522)
  - General (130)
  - Plant Construction (14)
  - Core Machines (306)
    - General (116)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.727)
  - General (446)
  - Extrusion (623)
    - General (20)
    - Flexible Films (302)
    - Rigid Films/Sheets (126)
    - Pipes (74)
    - Profiles/Rods (90)
    - Other (11)
  - Injection Moulding (181)
  - Blow Moulding (43)
  - PUR (82)
  - Other (307)
    - General (20)
    - Foam (80)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.244)
  - General (47)
  - Packaging (2.056)
  - Construction (326)
  - Automotive / Transport (999)
  - Electrical Appliances (226)
  - Consumer Goods (266)
  - Medical (210)
  - Technical (61)
  - Other (53)
- Regions and Countries (4.158)
  - World (195)
  - German-speaking Countries (493)
  - Europe (2.027)
    - General (496)
    - Italy (145)
    - France (155)
    - Spain/Portugal (104)
    - Great Britain/Ireland (516)
    - Low Countries (75)
    - Central Europe (179)
    - Scandinavia (46)
    - Russia (114)
    - Eastern Europe (54)
    - Southeastern Europe (143)
  - North America (496)
  - Asia (681)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (28)
    - India (87)
  - Middle East (144)
  - Other (40)
  - South America (82)
- Other (3.056)
  - Recycling/Disposal (2.189)
  - Economic Trend (487)
  - Services (41)
  - Logistics (258)
  - Energy (81)
Production and Engineering (3.821)
- Polymer Materials (2.382)
  - Petrochemicals (61)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.845)
    - General (30)
    - Standard Themoplastics (368)
    - Technical Thermoplastics (604)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (208)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (74)
    - Other (769)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (160)
      - Biopolymers (250)
      - Elastomers/TPE (115)
      - Recyclate (113)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (439)
  - Polymer Materials (144)
  - Technical (15)
  - Product Development (41)
  - Process (83)
  - Application (94)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (866)
  - Packaging (570)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (27)
  - Consumer Goods (50)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (39)
Management (764)
- Purchasing (105)
- General Management (177)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (99)
- Logistics (315)
People (1.507)
Industry (6.427)
- General (1.250)
- Associations/Institutions (2.449)
- Legislation (1.409)
- Environment / Health (1.309)
- plas.TV - Plastics unite(d) (10)
Events (1.163)
Plastic Fantastic (565)
Commentaries (84)
Interviews (152)
Notes by Publisher (73)

Energy Cost Surcharges

Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team

Price survey methodology