www.pieweb.com

Polymer Prices

POLYMER PRICES
Standard thermoplastics at the beginning of February 2008: Slow ordering keeps producer price increases in check / Polyolefins catch up with monomer rises / PVC slightly, PS and EPS significantly higher / Producers' inventories start to swell
14.02.2008
CRISTAL
Higher prices for titanium dioxide in the Americas
13.02.2008
DUPONT
EVA copolymers price increase
07.02.2008
POLYMER PRICES
Engineering thermoplastics at the end of January 2008: PA 6.6 and PBT move up / End of rock-bottom notations for POM, PMMA and PP compounds / ABS, PC and PA 6 still stable / Supply normal / Demand slow to recover / Conditions favourable for price hikes
06.02.2008
CHEVRON PHILLIPS
Price increase for SBC
06.02.2008
POLYMER PRICES
Standard thermoplastics in January 2008: Price explosion for polyolefins / PVC stable / Styrenics also up / PE just balanced / Cracker situation unstable / Speculative trading brakes PP / PS tightening? / Further hefty hikes on the table
05.02.2008
POLYMER PRICES
PET January 2008: Upward movement only at the bottom end / Rises marginal overall / North America and Asia lose some ground / February outlook muted
05.02.2008
BASE PETROCHEMICALS / AROMATICS / FEEDSTOCKS
January 2008
05.02.2008
INEOS NOVA
PS prices up again in February
04.02.2008
POLYMER PRICES
Strong demand tightens hexene grades of LLDPE / Price curve increasingly uncoupled from standard product / C6 to be reported separately in PIE
04.02.2008
DOW
PE resins on the way up again in February
23.01.2008
POLYMER PRICES
Polyurethane feedstocks in January 2008: MDI largely stable / Long supplies meet slack demand / TDI may have reached its peak / Polyols rise on the back of higher costs
23.01.2008
EVONIK
Price increase for pigment blacks
21.01.2008
SCOTT BADER
Price rises for resins, gelcoats and adhesives
18.01.2008
REICHHOLD
European price rises for composite products
18.01.2008
BAYER MATERIALSCIENCE
Polyisocyanates prices to increase
17.01.2008
POLYMER PRICES
Standard thermoplastics at the beginning of January 2008: Major increases for PE and EVA / Monomer increases up the pressure / PP and styrenics also rise / PVC still stable / Supply relatively well balanced / Demand normal
15.01.2008
HUNTSMAN
Polyols and polyurethane systems price rises
10.01.2008
CHEMTURA
Off-list price rise for flame retardant
09.01.2008
INEOS NOVA
EPS price rise is higher than expected
08.01.2008
POLYMER PRICES
Engineering thermoplastics at the end of December 2007: Increases not yet accepted / ABS and PC down again / Supply mostly well-balanced / Only POM tight / Methanol at record high / Significant hikes on the table / Latest transactions higher
07.01.2008
BASE PETROCHEMICALS / AROMATICS
December 2007
07.01.2008
POLYMER PRICES
Standard thermoplastics in December 2007: No year-end “close-out sale” / Prices mainly firm / Minor corrections at each end of the scale / Advance purchases stemmed / Higher feedstocks prompt calls for steep polymer hikes
04.01.2008
POLYMER PRICES
PET December 2007: Only minimal increases again in Europe / Feedstock costs bite worldwide as margins fall / Sluggish demand signals tough battle in January
04.01.2008
PETROCHEMICAL FEEDSTOCKS
December 2007
04.01.2008
Seite 235 von 260
Topic search
Plastics Information Europe
  • Polymer Prices (6.537)
    • Petrochemicals (622)
    • Standard Thermoplastics (1.057)
    • PET (265)
    • Engineering Thermoplastics (273)
    • Recyclate (409)
      • General (6)
      • Standard Thermoplastics / Recyclate (201)
      • Engineering Thermoplastics / Recyclate (202)
    • Polyurethanes (266)
    • High Performance Polymers (2)
    • Composites (199)
    • Announcements (2.637)
    • World Regions (635)
      • China (326)
        • Standard Thermoplastics (164)
        • Engineering Thermoplastics (162)
      • North America (185)
      • Russia (124)
    • Spot Prices (142)
    • Forecasts (30)
  • Companies (37.285)
    • Polymer Materials (18.301)
      • Petrochemicals (3.332)
      • Charge (1.962)
        • General (102)
        • Masterbatches (347)
        • Additives (834)
        • Colours (402)
        • Reinforcements/Fillers (277)
      • Polymers (11.783)
        • General (760)
        • Standard Thermoplastics (4.092)
          • General (114)
          • Polyolefins (2.083)
          • Polystyrenes (366)
          • PVC (728)
          • Polyester (589)
          • Expandable (PS, PP, PE) (212)
        • Technical Thermoplastics (3.457)
          • General (354)
          • Styrene Copolymers (286)
          • PC/PMMA (492)
          • Polyamides (984)
          • POM/PBT/PP (341)
          • Technical Compounds (1.000)
        • PUR (834)
        • Other (2.640)
          • General (108)
          • Composites/Thermosets (420)
          • High Performance (661)
          • Biopolymers (726)
          • Elastomers/TPE (390)
          • Recyclate (335)
      • Distribution (1.224)
    • Machinery (1.148)
      • General (33)
      • Plant Construction (148)
      • Core Machines (771)
        • General (92)
        • Extrusion (184)
        • Injection Moulding (389)
        • Blow Moulding (73)
        • Foam (12)
        • PUR (17)
        • Compression Moulding (4)
      • Peripherals (190)
        • General (36)
        • Control Systems (4)
        • Automatisation (35)
        • Dies/Tools/Moulds (102)
        • Components (13)
      • Finishing (6)
    • Processing (7.632)
      • General (951)
      • Extrusion (2.476)
        • General (132)
        • Flexible Films (1.201)
        • Rigid Films/Sheet (398)
        • Pipes (367)
        • Profiles/Rods (265)
        • Other (113)
      • Injection Moulding (1.862)
      • Blow Moulding (555)
      • PUR (343)
      • Other (1.190)
        • General (137)
        • Foam (321)
        • Composites/Thermosets (365)
        • Thermoforming (234)
        • Rotational Moulding (36)
        • Additive Manufacturing (97)
      • Finishing (255)
    • Application (7.867)
      • General (147)
      • Packaging (3.391)
      • Construction (772)
      • Automotive / Transport (1.808)
      • Electrical Appliances (363)
      • Consumer Goods (726)
      • Medical (425)
      • Technical (235)
    • Other (2.337)
      • Recycling/Disposal (1.865)
      • Services (265)
      • Logistics (207)
  • Commercial Register (179)
    • Insolvency (173)
    • Changes (6)
  • Markets (25.504)
    • Polymer Materials (10.974)
      • Petrochemicals (2.709)
      • Charge (900)
        • General (43)
        • Masterbatches (100)
        • Additives (354)
        • Colours (166)
        • Reinforcements/Fillers (237)
      • Polymers (6.949)
        • General (913)
        • Standard Thermoplastics (2.610)
          • General (75)
          • Polyolefins (1.304)
          • Polystyrenes (171)
          • PVC (543)
          • Polyester (374)
          • Expandable (PS, PP, PE) (143)
        • Technical Thermoplastics (1.397)
          • General (92)
          • Styrene Copolymers (122)
          • PC/PMMA (168)
          • Polyamides (489)
          • POM/PBT/PP (118)
          • Technical Compounds (408)
        • PUR (490)
        • Other (1.539)
          • General (50)
          • Composites/Thermosets (309)
          • High Performance (319)
          • Biopolymers (446)
          • Elastomers/TPE (151)
          • Recyclate (264)
      • Other Materials (61)
      • Distribution (355)
    • Machinery (537)
      • General (134)
      • Plant Construction (15)
      • Core Machines (313)
        • General (119)
        • Extrusion (38)
        • Injection Moulding (133)
        • Blow Moulding (15)
        • PUR (6)
        • Compression Moulding (2)
      • Peripherals (75)
        • General (21)
        • Automatisation (18)
        • Dies/Tools/Moulds (36)
    • Processing (1.786)
      • General (488)
      • Extrusion (632)
        • General (20)
        • Flexible Films (308)
        • Rigid Films/Sheets (126)
        • Pipes (76)
        • Profiles/Rods (91)
        • Other (11)
      • Injection Moulding (183)
      • Blow Moulding (43)
      • PUR (84)
      • Other (311)
        • General (20)
        • Foam (82)
        • Composites/Thermosets (142)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (39)
      • Finishing (45)
    • Applications (4.531)
      • General (55)
      • Packaging (2.203)
      • Construction (360)
      • Automotive / Transport (1.050)
      • Electrical Appliances (238)
      • Consumer Goods (282)
      • Medical (218)
      • Technical (64)
      • Other (61)
    • Regions and Countries (4.274)
      • World (197)
      • German-speaking Countries (504)
      • Europe (2.109)
        • General (526)
        • Italy (152)
        • France (158)
        • Spain/Portugal (107)
        • Great Britain/Ireland (534)
        • Low Countries (75)
        • Central Europe (184)
        • Scandinavia (48)
        • Russia (119)
        • Eastern Europe (63)
        • Southeastern Europe (143)
      • North America (503)
      • Asia (684)
        • General (123)
        • China (394)
        • Japan (51)
        • Korea (28)
        • India (88)
      • Middle East (152)
      • Other (41)
      • South America (84)
    • Other (3.402)
      • Recycling/Disposal (2.389)
      • Economic Trend (573)
      • Services (44)
      • Logistics (307)
      • Energy (89)
  • Production and Engineering (3.886)
    • Polymer Materials (2.420)
      • Petrochemicals (66)
      • Charge (451)
        • General (15)
        • Masterbatches (116)
        • Additives (232)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.871)
        • General (32)
        • Standard Themoplastics (370)
        • Technical Thermoplastics (606)
          • General (20)
          • Styrene Copolymers (63)
          • PC/PMMA (64)
          • Polyamides (209)
          • POM/PBT/PP (69)
          • Technical Compounds (181)
        • PUR (76)
        • Other (787)
          • General (23)
          • Composites/Thermosets (108)
          • High Performance (163)
          • Biopolymers (255)
          • Elastomers/TPE (115)
          • Recyclate (123)
      • Other (32)
    • Machinery (95)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (32)
        • General (16)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (450)
      • Polymer Materials (146)
      • Technical (16)
      • Product Development (43)
      • Process (84)
      • Application (97)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (60)
    • New Products (881)
      • Packaging (578)
      • Construction (35)
      • Automotive / Transport (104)
      • Electrical Appliances (28)
      • Consumer Goods (51)
      • Medical (39)
      • Technical (8)
      • Other (38)
    • Other (40)
  • Management (866)
    • Purchasing (111)
    • General Management (216)
    • Company organisation (45)
    • Marketing/Sales (16)
    • Human Resources (8)
    • Finances (105)
    • Logistics (365)
  • People (1.521)
  • Industry (6.888)
    • General (1.328)
    • Associations/Institutions (2.608)
    • Legislation (1.565)
    • Environment / Health (1.377)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.205)
  • Plastic Fantastic (595)
  • Commentaries (90)
  • Interviews (170)
  • Notes by Publisher (85)
© 2026 by Plastics Information Europe, Bad Homburg
Date of print: 22/11/2026
Ref: xgktebdn5ggzjxxyjz0yfxaj
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?node=100001&page=235&pageid=302