Show topic list

Polymer Prices

DOW Price hikes for epoxy resin blends	30.01.2007
DOW Higher PE prices in February	24.01.2007
POLYMER PRICES PU feedstocks January 2007: MDI soft, TDI firms at high level, polyols gain at the lower end	24.01.2007
CHEMSON Prices for PVC stabilisers moving up	22.01.2007
BAYER MATERIALSCIENCE Aromatic polyisocyanates see price hikes	19.01.2007
POLYMER PRICES Standard thermoplastics at the beginning of January 2007: Normal start to the year / Most prices firmer / Only PVC slightly softer / Supplies adequate / No sign of producers´ hoped-for turnaround	15.01.2007
RHODIA Price increase for adipic acid in place	10.01.2007
ROHM AND HAAS Higher prices for plastics additives in February	09.01.2007
CHEMTURA European price hike for plastics additives	08.01.2007
POLYMER PRICES Engineering thermoplastics at the end of December 2006: ABS shows further rise / Producers stand firm on large-volume businesses / Typical seasonal weakness / Big hikes on the table for all polymers	05.01.2007
BASE PETROCHEMICALS / AROMATICS December 2006	05.01.2007
BASF Price increase for GPPS	04.01.2007
PETROCHEMICAL FEEDSTOCKS December 2006	04.01.2007
POLYMER PRICES Standard thermoplastics December 2006: Only a few small "Christmas gifts" / Polyolefins and PS still soft / PVC and EPS firm / Good order book situation for January / Prices set to rise again?	04.01.2007
POLYMER PRICES PET December 2006: Market calms down / Stable rollover / Firming tendency for January	04.01.2007
ALBEMARLE Flame retardant prices to rise	03.01.2007
LANXESS Higher prices for technical rubber	03.01.2007
NOVA INNOVENE Price increase for PS	02.01.2007
INEOS Price hike for special HDPE compounds	22.12.2006
DOW Price increase for PE and PP	21.12.2006
DOW Price increase for polystyrene	18.12.2006
CHEMTURA Off-list price hike for brominated flame retardants	18.12.2006
PERSTORP Price increases planned for January	15.12.2006
CELANESE Polyols prices to rise by EUR 90/t	15.12.2006
POLYMER PRICES PU feedstocks in December: Endeavours to raise prices in Q4 mainly unsuccessful / Only TDI up / Plant outages to ease in January	15.12.2006

Seite 230 von 243

Topic search

Plastics Information Europe

Polymer Prices (6.092)
- Petrochemicals (499)
- Standard Thermoplastics (971)
- PET (250)
- Engineering Thermoplastics (257)
- Recyclate (374)
  - General (3)
  - Standard Thermoplastics / Recyclate (185)
  - Engineering Thermoplastics / Recyclate (186)
- Polyurethanes (248)
- High Performance Polymers (2)
- Composites (184)
- Announcements (2.577)
- World Regions (589)
  - China (296)
    - Standard Thermoplastics (149)
    - Engineering Thermoplastics (147)
  - North America (169)
  - Russia (124)
- Spot Prices (127)
- Forecasts (14)
Companies (34.808)
- Polymer Materials (17.191)
  - Petrochemicals (3.104)
  - Charge (1.859)
    - General (89)
    - Masterbatches (340)
    - Additives (779)
    - Colours (382)
    - Reinforcements/Fillers (269)
  - Polymers (11.059)
    - General (716)
    - Standard Thermoplastics (3.831)
      - General (113)
      - Polyolefins (1.947)
      - Polystyrenes (340)
      - PVC (669)
      - Polyester (563)
      - Expandable (PS, PP, PE) (199)
    - Technical Thermoplastics (3.258)
      - General (349)
      - Styrene Copolymers (261)
      - PC/PMMA (463)
      - Polyamides (905)
      - POM/PBT/PP (319)
      - Technical Compounds (961)
    - PUR (790)
    - Other (2.464)
      - General (101)
      - Composites/Thermosets (411)
      - High Performance (615)
      - Biopolymers (700)
      - Elastomers/TPE (370)
      - Recyclate (267)
  - Distribution (1.169)
- Machinery (1.089)
  - General (28)
  - Plant Construction (139)
  - Core Machines (743)
    - General (90)
    - Extrusion (181)
    - Injection Moulding (369)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (174)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (93)
    - Components (13)
  - Finishing (5)
- Processing (7.167)
  - General (897)
  - Extrusion (2.351)
    - General (123)
    - Flexible Films (1.133)
    - Rigid Films/Sheet (383)
    - Pipes (350)
    - Profiles/Rods (258)
    - Other (104)
  - Injection Moulding (1.727)
  - Blow Moulding (518)
  - PUR (311)
  - Other (1.125)
    - General (120)
    - Foam (306)
    - Composites/Thermosets (352)
    - Thermoforming (218)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (238)
- Application (7.355)
  - General (129)
  - Packaging (3.177)
  - Construction (728)
  - Automotive / Transport (1.688)
  - Electrical Appliances (337)
  - Consumer Goods (681)
  - Medical (401)
  - Technical (214)
- Other (2.006)
  - Recycling/Disposal (1.611)
  - Services (255)
  - Logistics (140)
Commercial Register (129)
- Insolvency (124)
- Changes (5)
Markets (23.517)
- Polymer Materials (10.164)
  - Petrochemicals (2.495)
  - Charge (862)
    - General (38)
    - Masterbatches (95)
    - Additives (341)
    - Colours (158)
    - Reinforcements/Fillers (230)
  - Polymers (6.422)
    - General (803)
    - Standard Thermoplastics (2.448)
      - General (74)
      - Polyolefins (1.219)
      - Polystyrenes (158)
      - PVC (505)
      - Polyester (351)
      - Expandable (PS, PP, PE) (141)
    - Technical Thermoplastics (1.287)
      - General (87)
      - Styrene Copolymers (108)
      - PC/PMMA (154)
      - Polyamides (442)
      - POM/PBT/PP (110)
      - Technical Compounds (386)
    - PUR (461)
    - Other (1.423)
      - General (47)
      - Composites/Thermosets (296)
      - High Performance (303)
      - Biopolymers (432)
      - Elastomers/TPE (141)
      - Recyclate (204)
  - Other Materials (59)
  - Distribution (326)
- Machinery (508)
  - General (129)
  - Plant Construction (14)
  - Core Machines (294)
    - General (111)
    - Extrusion (37)
    - Injection Moulding (125)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.710)
  - General (436)
  - Extrusion (619)
    - General (20)
    - Flexible Films (299)
    - Rigid Films/Sheets (125)
    - Pipes (74)
    - Profiles/Rods (90)
    - Other (11)
  - Injection Moulding (179)
  - Blow Moulding (43)
  - PUR (81)
  - Other (307)
    - General (20)
    - Foam (80)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.128)
  - General (44)
  - Packaging (1.996)
  - Construction (317)
  - Automotive / Transport (976)
  - Electrical Appliances (220)
  - Consumer Goods (256)
  - Medical (207)
  - Technical (60)
  - Other (52)
- Regions and Countries (4.118)
  - World (195)
  - German-speaking Countries (486)
  - Europe (2.002)
    - General (487)
    - Italy (144)
    - France (155)
    - Spain/Portugal (100)
    - Great Britain/Ireland (511)
    - Low Countries (74)
    - Central Europe (179)
    - Scandinavia (46)
    - Russia (111)
    - Eastern Europe (54)
    - Southeastern Europe (141)
  - North America (492)
  - Asia (680)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (27)
    - India (87)
  - Middle East (143)
  - Other (39)
  - South America (81)
- Other (2.889)
  - Recycling/Disposal (2.094)
  - Economic Trend (443)
  - Services (41)
  - Logistics (240)
  - Energy (71)
Production and Engineering (3.783)
- Polymer Materials (2.359)
  - Petrochemicals (60)
  - Charge (441)
    - General (14)
    - Masterbatches (112)
    - Additives (227)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.827)
    - General (30)
    - Standard Themoplastics (364)
    - Technical Thermoplastics (601)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (206)
      - POM/PBT/PP (69)
      - Technical Compounds (180)
    - PUR (72)
    - Other (760)
      - General (21)
      - Composites/Thermosets (108)
      - High Performance (160)
      - Biopolymers (247)
      - Elastomers/TPE (114)
      - Recyclate (110)
  - Other (31)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (433)
  - Polymer Materials (144)
  - Technical (14)
  - Product Development (41)
  - Process (82)
  - Application (90)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (858)
  - Packaging (566)
  - Construction (35)
  - Automotive / Transport (99)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (8)
  - Other (38)
- Other (39)
Management (727)
- Purchasing (104)
- General Management (166)
- Company organisation (44)
- Marketing/Sales (15)
- Human Resources (7)
- Finances (96)
- Logistics (295)
People (1.498)
Industry (6.222)
- General (1.220)
- Associations/Institutions (2.374)
- Legislation (1.349)
- Environment / Health (1.269)
- plas.TV - Plastics unite(d) (10)
Events (1.152)
Plastic Fantastic (552)
Commentaries (83)
Interviews (143)
Notes by Publisher (72)