www.pieweb.com

Polymer Prices Polyurethanes

POLYMER PRICES
Polyurethane feedstocks November: Weak demand pressures isocyanate prices / Extended Christmas holidays to prolong decline
20.11.2024
POLYMER PRICES
Polyurethane feedstocks October: From plus to rollover to minus – MDI, TDI, polyols develop unevenly / Demand remains weak across the board
22.10.2024
POLYMER PRICES
Polyurethane feedstocks September: Demand for TDI pushes prices significantly up / Rollovers everywhere else / Improvement in demand expected only in isolated cases
19.09.2024
POLYMER PRICES
Polyurethane feedstocks August 2024: Prices fall further but downward trend loses momentum / Only slight declines expected in September
21.08.2024
POLYMER PRICES
Polyurethane feedstocks July 2024: Significant price reductions dominate landscape / Processors put more emphasis on monthly contracts / Demand in holiday mode
22.07.2024
POLYMER PRICES
Polyurethane feedstocks June 2024: Weak demand, well-stocked inventories do not leave room for price hikes / New quarter not expected to see fundamental changes
19.06.2024
POLYMER PRICES
Polyurethane feedstocks May 2024: Upward trend for MDI halts / Demand remains below expectations / Oversupply set to put further pressure on prices
21.05.2024
POLYMER PRICES
Polyurethane feedstocks April 2024: Production problems push prices up / Further upward trend likely to be limited due to weak demand / Some customer segments remain below potential
19.04.2024
POLYMER PRICES
Polyurethane feedstocks March 2024: Prices continue to rise / Higher markups, especially for MDI
19.03.2024
POLYMER PRICES
Polyurethane feedstocks February 2024: Slight upturn for isocyanate prices / Stronger markups for polyols
20.02.2024
POLYMER PRICES
Polyurethane feedstocks January 2024: Weak demand again pressures isocyanate prices / Polyols slightly firmer
22.01.2024
POLYMER PRICES
Polyurethane feedstocks December 2023: Prices likely to fall further in January / Market governed by weak demand
18.12.2023
POLYMER PRICES
Polyurethane feedstocks November 2023: Slight markdowns overall / Price erosion likely to continue with weak demand
21.11.2023
POLYMER PRICES
Polyurethane feedstocks October 2023: Weak demand dominates market / TDI, polyols bottom out / Downward trend for MDI remains intact
19.10.2023
POLYMER PRICES
Polyurethane feedstocks September 2023: Discounts drive market / Trough has been reached / TDI could soon see renewed markups despite low demand
20.09.2023
POLYMER PRICES
Polyurethane feedstocks August 2023: Demand remains weak with stable supply / Hopes rest on September – will next month bring the autumn upturn?
22.08.2023
POLYMER PRICES
Polyurethane feedstocks July 2023: Downward trend set to continue in August / Full warehouses spur producers to underbid one another / Processors face short-time work, job cuts
20.07.2023
POLYMER PRICES
Polyurethane feedstocks June 2023: Reductions for TDI reach 7% / Sparse demand from application areas / Foamers have to hit the brakes
21.06.2023
POLYMER PRICES
Polyurethane feedstocks May 2023: Downward trend for isocyanates continues at slower pace / Polyols show signs of respite / Recovery in demand sluggish
19.05.2023
POLYMER PRICES
Polyurethane feedstocks April 2023: Prices continue to fall amid weak demand / Triple-digit markdowns for TDI / Only soft polyols in rollover / Prices expected to bottom out soon, except for TDI
20.04.2023
POLYMER PRICES
Polyurethane feedstocks March 2023: Downtrend unbroken / Prices could soon bottom out / Demand slow to improve
23.03.2023
POLYMER PRICES
Polyurethane feedstocks February 2023: Price plummet continues / Weak demand, cheap imports apply pressure / Large-scale restocking rare / Downward momentum set to ease in March
20.02.2023
POLYMER PRICES
Polyurethane feedstocks January 2023: Prices under pressure due to subdued demand, cheaper imports / Rising orders to buoy isocyanate prices in February
23.01.2023
POLYMER PRICES
Polyurethane feedstocks December 2022: Weak demand and cheap imports lead to price reductions / More semi-finished and finished goods from Asia / Lack of orders burdens European processors
21.12.2022
POLYMER PRICES
Polyurethane feedstocks November 2022: End of strong price hikes for TDI / Producers grant heavy discounts partially on low demand / Generally more reductions in weeks ahead
22.11.2022
Seite 1 von 10
Topic search
Plastics Information Europe
  • Polymer Prices (5.846)
    • Petrochemicals (427)
    • Standard Thermoplastics (920)
    • PET (241)
    • Engineering Thermoplastics (247)
    • Recyclate (353)
      • Standard Thermoplastics / Recyclate (176)
      • Engineering Thermoplastics / Recyclate (177)
    • Polyurethanes (239)
    • High Performance Polymers (2)
    • Composites (175)
    • Announcements (2.558)
    • World Regions (562)
      • China (278)
        • Standard Thermoplastics (140)
        • Engineering Thermoplastics (138)
      • North America (160)
      • Russia (124)
    • Spot Prices (118)
    • Forecasts (4)
  • Companies (33.271)
    • Polymer Materials (16.488)
      • Petrochemicals (2.959)
      • Charge (1.799)
        • General (89)
        • Masterbatches (332)
        • Additives (750)
        • Colours (367)
        • Reinforcements/Fillers (261)
      • Polymers (10.597)
        • General (673)
        • Standard Thermoplastics (3.669)
          • General (113)
          • Polyolefins (1.860)
          • Polystyrenes (323)
          • PVC (642)
          • Polyester (544)
          • Expandable (PS, PP, PE) (187)
        • Technical Thermoplastics (3.130)
          • General (348)
          • Styrene Copolymers (251)
          • PC/PMMA (442)
          • Polyamides (861)
          • POM/PBT/PP (305)
          • Technical Compounds (923)
        • PUR (765)
        • Other (2.360)
          • General (100)
          • Composites/Thermosets (399)
          • High Performance (589)
          • Biopolymers (681)
          • Elastomers/TPE (357)
          • Recyclate (234)
      • Distribution (1.133)
    • Machinery (1.065)
      • General (27)
      • Plant Construction (130)
      • Core Machines (731)
        • General (88)
        • Extrusion (176)
        • Injection Moulding (364)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (173)
        • General (31)
        • Control Systems (4)
        • Automatisation (33)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.867)
      • General (858)
      • Extrusion (2.263)
        • General (112)
        • Flexible Films (1.091)
        • Rigid Films/Sheet (368)
        • Pipes (340)
        • Profiles/Rods (255)
        • Other (97)
      • Injection Moulding (1.648)
      • Blow Moulding (492)
      • PUR (287)
      • Other (1.086)
        • General (114)
        • Foam (302)
        • Composites/Thermosets (336)
        • Thermoforming (209)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (233)
    • Application (7.036)
      • General (125)
      • Packaging (3.037)
      • Construction (697)
      • Automotive / Transport (1.615)
      • Electrical Appliances (326)
      • Consumer Goods (653)
      • Medical (379)
      • Technical (204)
    • Other (1.815)
      • Recycling/Disposal (1.466)
      • Services (248)
      • Logistics (101)
  • Commercial Register (111)
    • Insolvency (106)
    • Changes (5)
  • Markets (22.258)
    • Polymer Materials (9.651)
      • Petrochemicals (2.346)
      • Charge (834)
        • General (38)
        • Masterbatches (90)
        • Additives (331)
        • Colours (153)
        • Reinforcements/Fillers (222)
      • Polymers (6.106)
        • General (720)
        • Standard Thermoplastics (2.346)
          • General (74)
          • Polyolefins (1.160)
          • Polystyrenes (154)
          • PVC (486)
          • Polyester (337)
          • Expandable (PS, PP, PE) (135)
        • Technical Thermoplastics (1.235)
          • General (87)
          • Styrene Copolymers (101)
          • PC/PMMA (146)
          • Polyamides (420)
          • POM/PBT/PP (106)
          • Technical Compounds (375)
        • PUR (444)
        • Other (1.361)
          • General (46)
          • Composites/Thermosets (287)
          • High Performance (293)
          • Biopolymers (421)
          • Elastomers/TPE (137)
          • Recyclate (177)
      • Other Materials (57)
      • Distribution (308)
    • Machinery (501)
      • General (127)
      • Plant Construction (14)
      • Core Machines (289)
        • General (109)
        • Extrusion (36)
        • Injection Moulding (123)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.641)
      • General (404)
      • Extrusion (597)
        • General (20)
        • Flexible Films (291)
        • Rigid Films/Sheets (116)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (11)
      • Injection Moulding (177)
      • Blow Moulding (43)
      • PUR (77)
      • Other (299)
        • General (20)
        • Foam (77)
        • Composites/Thermosets (136)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.903)
      • General (37)
      • Packaging (1.881)
      • Construction (297)
      • Automotive / Transport (932)
      • Electrical Appliances (212)
      • Consumer Goods (243)
      • Medical (198)
      • Technical (56)
      • Other (47)
    • Regions and Countries (4.017)
      • World (194)
      • German-speaking Countries (472)
      • Europe (1.944)
        • General (464)
        • Italy (142)
        • France (155)
        • Spain/Portugal (97)
        • Great Britain/Ireland (502)
        • Low Countries (74)
        • Central Europe (173)
        • Scandinavia (44)
        • Russia (107)
        • Eastern Europe (46)
        • Southeastern Europe (140)
      • North America (481)
      • Asia (667)
        • General (118)
        • China (389)
        • Japan (49)
        • Korea (26)
        • India (85)
      • Middle East (141)
      • Other (37)
      • South America (81)
    • Other (2.545)
      • Recycling/Disposal (1.905)
      • Economic Trend (343)
      • Services (41)
      • Logistics (202)
      • Energy (54)
  • Production and Engineering (3.705)
    • Polymer Materials (2.313)
      • Petrochemicals (55)
      • Charge (436)
        • General (14)
        • Masterbatches (111)
        • Additives (223)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.792)
        • General (30)
        • Standard Themoplastics (356)
        • Technical Thermoplastics (593)
          • General (19)
          • Styrene Copolymers (62)
          • PC/PMMA (62)
          • Polyamides (203)
          • POM/PBT/PP (67)
          • Technical Compounds (180)
        • PUR (71)
        • Other (742)
          • General (21)
          • Composites/Thermosets (107)
          • High Performance (159)
          • Biopolymers (240)
          • Elastomers/TPE (113)
          • Recyclate (102)
      • Other (30)
    • Machinery (94)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (421)
      • Polymer Materials (140)
      • Technical (13)
      • Product Development (40)
      • Process (81)
      • Application (89)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (54)
    • New Products (839)
      • Packaging (549)
      • Construction (34)
      • Automotive / Transport (99)
      • Electrical Appliances (26)
      • Consumer Goods (49)
      • Medical (37)
      • Technical (7)
      • Other (38)
    • Other (38)
  • Management (636)
    • Purchasing (100)
    • General Management (137)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (7)
    • Finances (88)
    • Logistics (247)
  • People (1.474)
  • Industry (5.739)
    • General (1.136)
    • Associations/Institutions (2.211)
    • Legislation (1.210)
    • Environment / Health (1.172)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.121)
  • Plastic Fantastic (522)
  • Commentaries (78)
  • Interviews (131)
  • Notes by Publisher (69)
Energy Cost Surcharges
Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 02/12/2024
Ref: y0biqa45u0nyqk55dspomdv2
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_255633&node=100075