www.pieweb.com

Polymer Prices Engineering Thermoplastics

POLYMER PRICES
Engineering thermoplastics April 2023: Falling prices dominate / Short month of May unlikely to bring much improvement / Converters already focusing their attention on Q3
04.05.2023
POLYMER PRICES
Engineering thermoplastics March 2023: Reduction of energy surcharges leads to some significant price cuts / Further reductions expected / Demand outlook makes converters hopeful
06.04.2023
POLYMER PRICES
Engineering thermoplastics February 2023: Market uproar / Aggressive pricing from Asia pressures European producers / Converters in price vice
06.03.2023
POLYMER PRICES
Engineering thermoplastics January 2023: Downward trend gains momentum / All types under pressure due to weak demand and cheap imports / Further reductions expected in February
06.02.2023
POLYMER PRICES
Engineering thermoplastics December 2022: Weak demand lowers costs / More orders expected in some areas / Prices set to fall further in January
05.01.2023
POLYMER PRICES
Engineering thermoplastics November 2022: Lower flat-rate energy fees, weak demand put pressure on prices / Only PMMA escapes trend / More pressure expected in December
06.12.2022
POLYMER PRICES
Engineering thermoplastics October 2022: Prices trend further down / Weak demand and increasing pressure from Asian imports / Greater price stability likely in November due to production cutbacks
04.11.2022
POLYMER PRICES
Engineering thermoplastics September 2022: Market in virtually unprecedented state of disruption / Cheap imports from Asia put prices under pressure / More production stoppages in the offing
07.10.2022
POLYMER PRICES
Engineering thermoplastics August 2022: Many prices drop significantly / Imports counteract production cutbacks in Europe / Tough negotiations expected in September with little room for manoeuvre
06.09.2022
POLYMER PRICES
Engineering thermoplastics July 2022: Market remains divided, prices present a mixed picture / No massive increases across the board in July / Will August see prices plunge after the fall in benzene contract?
04.08.2022
POLYMER PRICES
Engineering thermoplastics June 2022: Regional price spread increasing dramatically in Europe / Precursors costs cannot be passed on / Lower demand from customer markets
06.07.2022
POLYMER PRICES
Engineering thermoplastics May 2022: Price moves vary / PC, PBT roll over / POM, PMMA at record highs / June increases expected on rise in benzene
07.06.2022
POLYMER PRICES
Engineering thermoplastics April 2022: Prices jump again / Hefty hikes for all types / Southern Europe particularly hard-hit / Demand still largely weak / Further increases likely in May
05.05.2022
POLYMER PRICES
Engineering thermoplastics March 2022: Market in state of shock / Tight supply expected to spur April prices despite weak demand / Little relief from glass-fibre imports / Automotive troubles remain
06.04.2022
POLYMER PRICES
Engineering thermoplastics February 2022: With the exception of PC, most prices roll over / Supply and demand generally very weak / Minor price increases expected in March / Substantial price rise for glass fibres
04.03.2022
POLYMER PRICES
Engineering thermoplastics January 2022: Situation with PC transparent seems to be easing due to fall in benzene price / PA remains problematic / Still a case of “volume before price” for POM
04.02.2022
POLYMER PRICES
Engineering thermoplastics December 2021: Rollover for most types / Demand weak at end of year / With feedstock prices still rising, increases in January are virtually certain
06.01.2022
POLYMER PRICES
Engineering thermoplastics November 2021: Prices show little movement in November / Significant increases imminent for flame-retardant and reinforced materials / Production cutbacks with base polymers
06.12.2021
POLYMER PRICES
Engineering thermoplastics October 2021: Differing price development / Demand gradually declines further / Glass fibres, flame retardants and carbon black will drive prices up in November
04.11.2021
POLYMER PRICES
Engineering thermoplastics September 2021: Some peak prices capped / Glass fibres, additives short / Significant increases expected from rise in energy, transport costs
06.10.2021
POLYMER PRICES
Engineering thermoplastics August 2021: Converters hovering between hope and fear / Shortage of raw materials and crumbling supply chains lead to rising prices in many industries / Building sector up, auto sector down
06.09.2021
POLYMER PRICES
Engineering thermoplastics July 2021: Holiday season and weaker demand from car sector ease tensions / Hot autumn looms / Short-glass fibres remain problem child
05.08.2021
POLYMER PRICES
Engineering thermoplastics June 2021: All types roll over / PA 6.6, PMMA still heavily affected by weak feedstock chain / Demand varies / No changes expected in July
06.07.2021
POLYMER PRICES
Engineering thermoplastics May 2021: Prices generally continue to rise irrespective of the drop in feedstock costs / Occasional signs of a plateau / High prices and weakness in automotive industry slow down business
07.06.2021
POLYMER PRICES
Engineering thermoplastics April 2021: More triple-digit hikes as demand remains vibrant / Many shops struggle to secure material / Another twist of the price screw inevitable
06.05.2021
Seite 1 von 10
Topic search
Plastics Information Europe
  • Polymer Prices (5.378)
    • Petrochemicals (308)
    • Standard Thermoplastics (825)
    • PET (223)
    • Engineering Thermoplastics (227)
    • Recyclate (317)
      • Standard Thermoplastics / Recyclate (158)
      • Engineering Thermoplastics / Recyclate (159)
    • Polyurethanes (221)
    • High Performance Polymers (2)
    • Composites (157)
    • Announcements (2.490)
    • World Regions (508)
      • China (242)
        • Standard Thermoplastics (122)
        • Engineering Thermoplastics (120)
      • North America (142)
      • Russia (124)
    • Spot Prices (100)
  • Companies (30.300)
    • Polymer Materials (14.984)
      • Petrochemicals (2.674)
      • Charge (1.684)
        • General (84)
        • Masterbatches (317)
        • Additives (701)
        • Colours (334)
        • Reinforcements/Fillers (248)
      • Polymers (9.570)
        • General (597)
        • Standard Thermoplastics (3.324)
          • General (111)
          • Polyolefins (1.644)
          • Polystyrenes (298)
          • PVC (596)
          • Polyester (497)
          • Expandable (PS, PP, PE) (178)
        • Technical Thermoplastics (2.885)
          • General (336)
          • Styrene Copolymers (231)
          • PC/PMMA (386)
          • Polyamides (789)
          • POM/PBT/PP (280)
          • Technical Compounds (863)
        • PUR (688)
        • Other (2.076)
          • General (89)
          • Composites/Thermosets (377)
          • High Performance (534)
          • Biopolymers (602)
          • Elastomers/TPE (322)
          • Recyclate (152)
      • Distribution (1.056)
    • Machinery (1.026)
      • General (25)
      • Plant Construction (124)
      • Core Machines (704)
        • General (83)
        • Extrusion (172)
        • Injection Moulding (348)
        • Blow Moulding (69)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (169)
        • General (30)
        • Control Systems (4)
        • Automatisation (31)
        • Dies/Tools/Moulds (91)
        • Components (13)
      • Finishing (4)
    • Processing (6.418)
      • General (790)
      • Extrusion (2.124)
        • General (105)
        • Flexible Films (1.011)
        • Rigid Films/Sheet (351)
        • Pipes (320)
        • Profiles/Rods (245)
        • Other (92)
      • Injection Moulding (1.527)
      • Blow Moulding (466)
      • PUR (257)
      • Other (1.032)
        • General (108)
        • Foam (288)
        • Composites/Thermosets (320)
        • Thermoforming (196)
        • Rotational Moulding (30)
        • Additive Manufacturing (90)
      • Finishing (222)
    • Application (6.420)
      • General (118)
      • Packaging (2.730)
      • Construction (646)
      • Automotive / Transport (1.484)
      • Electrical Appliances (310)
      • Consumer Goods (592)
      • Medical (358)
      • Technical (182)
    • Other (1.452)
      • Recycling/Disposal (1.209)
      • Services (225)
      • Logistics (18)
  • Commercial Register (90)
    • Insolvency (85)
    • Changes (5)
  • Markets (19.934)
    • Polymer Materials (8.674)
      • Petrochemicals (2.081)
      • Charge (781)
        • General (38)
        • Masterbatches (84)
        • Additives (314)
        • Colours (137)
        • Reinforcements/Fillers (208)
      • Polymers (5.484)
        • General (560)
        • Standard Thermoplastics (2.147)
          • General (70)
          • Polyolefins (1.054)
          • Polystyrenes (140)
          • PVC (453)
          • Polyester (305)
          • Expandable (PS, PP, PE) (125)
        • Technical Thermoplastics (1.155)
          • General (85)
          • Styrene Copolymers (93)
          • PC/PMMA (134)
          • Polyamides (396)
          • POM/PBT/PP (99)
          • Technical Compounds (348)
        • PUR (410)
        • Other (1.212)
          • General (37)
          • Composites/Thermosets (280)
          • High Performance (277)
          • Biopolymers (376)
          • Elastomers/TPE (129)
          • Recyclate (113)
      • Other Materials (51)
      • Distribution (277)
    • Machinery (482)
      • General (124)
      • Plant Construction (14)
      • Core Machines (275)
        • General (103)
        • Extrusion (35)
        • Injection Moulding (116)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (69)
        • General (21)
        • Automatisation (15)
        • Dies/Tools/Moulds (33)
    • Processing (1.570)
      • General (367)
      • Extrusion (580)
        • General (20)
        • Flexible Films (280)
        • Rigid Films/Sheets (113)
        • Pipes (70)
        • Profiles/Rods (87)
        • Other (10)
      • Injection Moulding (174)
      • Blow Moulding (43)
      • PUR (72)
      • Other (290)
        • General (19)
        • Foam (75)
        • Composites/Thermosets (133)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (35)
      • Finishing (44)
    • Applications (3.425)
      • General (29)
      • Packaging (1.595)
      • Construction (269)
      • Automotive / Transport (835)
      • Electrical Appliances (206)
      • Consumer Goods (214)
      • Medical (186)
      • Technical (52)
      • Other (39)
    • Regions and Countries (3.852)
      • World (189)
      • German-speaking Countries (439)
      • Europe (1.854)
        • General (424)
        • Italy (137)
        • France (153)
        • Spain/Portugal (91)
        • Great Britain/Ireland (488)
        • Low Countries (74)
        • Central Europe (170)
        • Scandinavia (43)
        • Russia (94)
        • Eastern Europe (43)
        • Southeastern Europe (137)
      • North America (462)
      • Asia (652)
        • General (113)
        • China (383)
        • Japan (49)
        • Korea (26)
        • India (81)
      • Middle East (140)
      • Other (36)
      • South America (80)
    • Other (1.931)
      • Recycling/Disposal (1.567)
      • Economic Trend (208)
      • Services (38)
      • Logistics (118)
  • Production and Engineering (3.385)
    • Polymer Materials (2.140)
      • Petrochemicals (46)
      • Charge (416)
        • General (12)
        • Masterbatches (106)
        • Additives (211)
        • Colours (52)
        • Reinforcements/Fillers (35)
      • Polymers (1.650)
        • General (26)
        • Standard Themoplastics (326)
        • Technical Thermoplastics (574)
          • General (19)
          • Styrene Copolymers (58)
          • PC/PMMA (60)
          • Polyamides (196)
          • POM/PBT/PP (65)
          • Technical Compounds (176)
        • PUR (65)
        • Other (659)
          • General (19)
          • Composites/Thermosets (103)
          • High Performance (156)
          • Biopolymers (207)
          • Elastomers/TPE (104)
          • Recyclate (70)
      • Other (28)
    • Machinery (92)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (31)
    • Research (367)
      • Polymer Materials (124)
      • Technical (12)
      • Product Development (37)
      • Process (72)
      • Application (80)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (38)
    • New Products (751)
      • Packaging (478)
      • Construction (33)
      • Automotive / Transport (95)
      • Electrical Appliances (24)
      • Consumer Goods (46)
      • Medical (34)
      • Technical (7)
      • Other (34)
    • Other (35)
  • Management (448)
    • Purchasing (77)
    • General Management (89)
    • Company organisation (43)
    • Marketing/Sales (12)
    • Human Resources (5)
    • Finances (69)
    • Logistics (153)
  • People (1.410)
  • Industry (4.764)
    • General (1.011)
    • Associations/Institutions (1.863)
    • Legislation (952)
    • Environment / Health (928)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.089)
  • Plastic Fantastic (469)
  • Commentaries (68)
  • Interviews (109)
  • Notes by Publisher (57)
© 2023 by Plastics Information Europe, Bad Homburg
Date of print: 29/05/2023
Ref: klo4q045xtqdm355jkehdtvb
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_251808&node=100041